Paper
28 September 2015 In-fiber Michelson interferometer inclinometer
Author Affiliations +
Proceedings Volume 9634, 24th International Conference on Optical Fibre Sensors; 96341W (2015) https://doi.org/10.1117/12.2195392
Event: International Conference on Optical Fibre Sensors (OFS24), 2015, Curitiba, Brazil
Abstract
This work describes an in-fiber Michelson interferometer inclinometer which is sensitive to curvature applied in the tapered region. The performance of this inclinometer is evaluated by calculating the variation of the fringe visibility near the 1550 nm spectral range as a function of the tilt angle. It is presented the results of four experimental measurements and calculated the average and standard deviation of those measurements. The results indicate a good response of the sensor within the angular range between 3° and 6°. The average of those four measurements is around -0.15/° and the greatest standard deviation is about 5.5%.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
C. R. da Silveira, P. A. S. Jorge, J. W. A. Costa, M. T. M. R. Giraldi, J. L. Santos, and O. Frazão "In-fiber Michelson interferometer inclinometer ", Proc. SPIE 9634, 24th International Conference on Optical Fibre Sensors, 96341W (28 September 2015); https://doi.org/10.1117/12.2195392
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Visibility

Michelson interferometers

Fringe analysis

Sensors

Cladding

Refractive index

Capillaries

Back to Top