A 400 KHz line rate 2048 pixel modular SWIR linear array for earth observation applications

Ankur Anchlia; Rosa Maria Vinella; Kristof Wouters; Daphne Gielen; Peter Hooylaerts; Pieter Deroo; Wouter Ruythooren; Koen van der Zanden; Jan Vermeiren; Patrick Merken

doi:10.1117/12.2194935

12 October 2015 A 400 KHz line rate 2048 pixel modular SWIR linear array for earth observation applications

Ankur Anchlia, Rosa Maria Vinella, Kristof Wouters, Daphne Gielen, Peter Hooylaerts, Pieter Deroo, Wouter Ruythooren, Koen van der Zanden, Jan Vermeiren, Patrick Merken

Author Affiliations +

Proceedings Volume 9639, Sensors, Systems, and Next-Generation Satellites XIX; 96390T (2015) https://doi.org/10.1117/12.2194935
Event: SPIE Remote Sensing, 2015, Toulouse, France

Abstract

In this paper, we report about a family of linear imaging FPAs sensitive in the [0.9 - 1.7um] band, developed for high speed applications such as LIDAR, wavelength references and OCT analyzers and also for earth observation applications. Fast linear FPAs can also be used in a wide variety of terrestrial applications, including high speed sorting, electro- and photo-luminesce and medical applications. The arrays are based on a modular ROIC design concept: modules of 512 pixels are stitched during fabrication to achieve 512, 1024 and 2048 pixel arrays. In principle, this concept can be extended to any multiple of 512 pixels, the limiting factor being the pixel yield of long InGaAs arrays and the CTE differences in the hybrid setup. Each 512-pixel module has its own on-chip digital sequencer, analog readout chain and 4 output buffers. This modular concept enables a long-linear array to run at a high line rate of 400 KHz irrespective of the array length, which limits the line rate in a traditional linear array. The pixel has a pitch of 12.5um. The detector frontend is based on CTIA (Capacitor Trans-impedance Amplifier), having 5 selectable integration capacitors giving full well from 62x10³e- (gain0) to 40x10⁶e- (gain4). An auto-zero circuit limits the detector bias non-uniformity to 5-10mV across broad intensity levels, limiting the input referred dark signal noise to 20e-_rms for Tint=3ms at room temperature. An on-chip CDS that follows the CTIA facilitates removal of Reset/KTC noise, CTIA offsets and most of the 1/f noise. The measured noise of the ROIC is 35e-_rms in gain0. At a master clock rate of 60MHz and a minimum integration time of 1.4us, the FPAs reach the highest line rate of 400 KHz.

Citation Download Citation

Ankur Anchlia, Rosa Maria Vinella, Kristof Wouters, Daphne Gielen, Peter Hooylaerts, Pieter Deroo, Wouter Ruythooren, Koen van der Zanden, Jan Vermeiren, and Patrick Merken "A 400 KHz line rate 2048 pixel modular SWIR linear array for earth observation applications", Proc. SPIE 9639, Sensors, Systems, and Next-Generation Satellites XIX, 96390T (12 October 2015); https://doi.org/10.1117/12.2194935

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
7 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Readout integrated circuits

Cadmium sulfide

Indium gallium arsenide

Short wave infrared radiation

Sensors

Clocks

Analog electronics

Show All Keywords

Keywords/Phrases

Search In:

Publication Years