Paper
13 May 2016 High power free space optical link for rapid energy and data transmission
Harbans S. Dhadwal, Jahangir Rastegar, Dake Feng, Philip Kwok
Author Affiliations +
Abstract
Design and experimental data for a high power laser diode based free space point-to-point optical power/data link is presented. In time critical power up applications, such as providing power and guidance information to a munition shell just prior to deployment, energy of the order of 100 J needs to be transferred in under 10 s. Current inductive technology is slow and broadcasts a radio-frequency signal which is undesirable for stealth operation. Rapid energy transfer times require high irradiance levels at the surface of the photovoltaic cells, typically, exceeding 1000X suns. Through efficient thermal design of heat sinks, high optical to electrical power conversion efficiencies of 50%, which are usually attainable at low power levels of 1 W, are achievable at higher power levels.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Harbans S. Dhadwal, Jahangir Rastegar, Dake Feng, and Philip Kwok "High power free space optical link for rapid energy and data transmission", Proc. SPIE 9837, Unmanned Systems Technology XVIII, 98370B (13 May 2016); https://doi.org/10.1117/12.2222909
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Solar energy

Data transmission

Free space optics

Semiconductor lasers

Diodes

Fiber lasers

Free space

RELATED CONTENT

Superfluorescence three-level neodymium-doped fiber source
Proceedings of SPIE (October 21 2004)
469-nm fiber laser source
Proceedings of SPIE (April 22 2005)
Novel design of a gain-switched diode-pumped fiber laser
Proceedings of SPIE (February 19 2009)
Passive coherent combining of fiber oscillators
Proceedings of SPIE (February 20 2007)
Two laser ranging instruments using chaotic light
Proceedings of SPIE (November 30 2011)

Back to Top