Paper
17 August 2016 Optical design considerations and raytracing results for the Arcus grating spectrometer concept
Author Affiliations +
Abstract
Arcus is a mission concept for a next generation X-ray grating spectrometer. It will offer spectral resolution (λ/▵λ) greater than 2000 combined with over 500 cm2 of effective area in the 2.1-2.4 nm bandpass. These capabilities will elucidate the cycle of baryonic matter in and out of galaxies, the means by which supermassive black holes influence their surroundings, and the early formation and evolution of solar systems. We present the overall optical design of the mission, which features four arrays of silicon pore optics modules with four matching arrays of off-plane reflection grating modules. These optics disperse the incident X-rays over the 12 m focal length in four separate conical diffraction patterns onto CCD arrays at the focal plane. Each array of optics is an azimuthal sub-aperture of the typical Wolter telescope design, enabling enhanced spectral resolution due to an asymmetric point spread function. The theoretical spectral resolution, effective area, and alignment tolerances have been determined via raytrace modeling.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ryan Allured, Randall L. McEntaffer, Edward Hertz, Peter N. Cheimets, and Randall K. Smith "Optical design considerations and raytracing results for the Arcus grating spectrometer concept", Proc. SPIE 9905, Space Telescopes and Instrumentation 2016: Ultraviolet to Gamma Ray, 99054O (17 August 2016); https://doi.org/10.1117/12.2233763
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Wind energy

Space telescopes

Cameras

Particles

Environmental sensing

Ray tracing

RELATED CONTENT


Back to Top