Versatile quantum microwave photonic signal processing platform based on coincidence window selection technique

Xinghua Li; Yifan Guo; Xiao Xiang; Runai Quan; Mingtao Cao; Ruifang Dong; Tao Liu; Ming Li; Shougang Zhang

doi:10.1117/1.APN.3.5.056013

31 July 2024 Versatile quantum microwave photonic signal processing platform based on coincidence window selection technique

Xinghua Li, Yifan Guo, Xiao Xiang, Runai Quan, Mingtao Cao, Ruifang Dong, Tao Liu, Ming Li, Shougang Zhang

Author Affiliations +

Funded by: China Postdoctoral Science Foundation

Advanced Photonics Nexus, Vol. 3, Issue 5, 056013 (July 2024). https://doi.org/10.1117/1.APN.3.5.056013

Abstract

Quantum microwave photonics (QMWP) is an innovative approach that combines energy–time entangled biphoton sources as the optical carrier with time-correlated single-photon detection for high-speed radio frequency (RF) signal recovery. This groundbreaking method offers unique advantages, such as nonlocal RF signal encoding and robust resistance to dispersion-induced frequency fading. We explore the versatility of processing the quantum microwave photonic signal by utilizing coincidence window selection on the biphoton coincidence distribution. The demonstration includes finely tunable RF phase shifting, flexible multitap transversal filtering (with up to 14 taps), and photonically implemented RF mixing, leveraging the nonlocal RF mapping characteristic of QMWP. These accomplishments significantly enhance the capability of microwave photonic systems in processing ultraweak signals, opening up new possibilities for various applications.

1. Introduction

Microwave photonics (MWP)¹^–⁴ is an interdisciplinary field that combines the principles of both microwave engineering and photonics to leverage the unique advantages of both domains. Due to its wide range of applications across various areas, including broadband wireless access networks, sensor networks, radars, satellite communications, and warfare systems,⁵^–¹¹ MWP has been intensively researched for the last few decades, and numerous solutions have been demonstrated.⁴^,¹²^–¹⁹ Accompanying the rapid development of MWP technology, the bandwidth and sensitivity limitations in traditional microwaves boost the highly demanding need for the exploration of new technology to enhance the capability of MWP.²⁰ Inspired by the enhancements of photonic quantum technology in a vast range of fields from precise navigation and timing, secure communications, to superresolution imaging and sensing, etc.,²¹^–²⁹ quantum microwave photonics (QMWP) is highly promising to break the bottlenecks of the current MWP technology. By applying the superlow-jitter and high-sensitivity single-photon detector, the scheme of single-photon MWP has provided the capability of ultraweak signal detection and high-speed processing.²⁷ Further utilizing an energy–time entangled biphoton source as the optical carrier, the QMWP technology has been proposed and presented in a radio-over-fiber system.²⁸ Benefiting from the nonclassical feature of quantum entanglement, the unprecedented capability of nonlocal radio frequency (RF) signal modulation with strong resistance to the dispersion-induced frequency fading effect associated with ultrashort pulse carriers as well as the significantly improved spurious-free dynamic range in terms of second harmonic distortion has been shown, unveiling invaluable new possibilities in MWP. Recently, both RF phase shifting and multitap transversal filtering have been demonstrated by introducing a programmable optical waveshaper into the QMWP system.²⁹ However, the wavelength selection onto the photon carrier can lead to a significant loss, at least 20 dB for the realization of a three-tap transversal filtering, in the system. In addition, constrained by the grating-based monochromator used in the waveshaper, the achievable spectral resolution is challenging to improve for the purpose of precise and efficient wavelength selection.³⁰ On the other hand, as the implementation of the QMWP technology depends directly on the coincidence-based heralding on either the signal or the idler photons, the law of appropriate selection of the coincidence window width for maximizing the recovered RF signal has been revealed very recently.³¹

In this paper, the utility of the coincidence window selection for processing the RF signal is further revealed, which encompasses the versatile realization of a microwave photonic phase shifter, a microwave photonic filter, and a microwave photonic mixer. The phase shifter offers a fine-phase shift of 0.01 rad at 0.2 GHz and a large-phase shift range of 24.5 rad at 6.1 GHz, achieved by varying the window displacement. For multitap filters, the tap number, free spectral range (FSR), and main sidelobe suppression ratio (MSLR) are key indicators of their performance, which can be flexibly manipulated by configuring the number of selection windows within the biphotons coincidence distribution envelope, adjusting the spacing between these windows, and applying the required weight ratios to them. Furthermore, we present a microwave photonic mixer structure based on the nonlocal RF mapping characteristic of QMWP, which offers enhanced functionality and flexibility in RF signal mixing applications. These accomplishments once again give prominence to the superiority of QMWP and its bright prospect in the new application field of MWP.

2. Theoretical Principle

To illustrate the working principle of the QMWP processing scheme based on the coincidence window selection technique, its comparison with the classical MWP scheme is first presented. Figure 1(a) demonstrates the implementation of a basic classical multitap transversal MWP filter $λ_{1}, \dots, λ_{n}$ using a multiwavelength optical carrier. This carrier is modulated by a high-speed RF signal and undergoes dispersion. According to the dispersive phase-shifting theory, each wavelength component in the optical carrier experiences a wavelength-dependent phase shift due to dispersion. By setting the wavelengths of the optical carrier with an identical spacing between them, the $n$ -tap transversal MWP filter is realized.³²

Fig. 1

(a) Scheme of a classical $n$ -tap transversal MWP filter. (b) Scheme of a QMWP transversal filter. Insets (I)–(III) depict the working principle of the QMWP signal processing based on the coincidence window selection technique.

In the QMWP transversal filtering scheme, as shown in Fig. 1(b), the RF modulation on the idler photons can be considered as the temporal shaping of the photon flows. This shaping is nonlocally mapped onto their “twin” signal photons due to the energy–time entanglement between the signal and idler photons.³³^,³⁴ The mapping process is visualized in inset I of Fig. 1(b). Simultaneously, the dispersion applied to the signal photons not only broadens the biphoton coincidence distribution but also enables nonlocal wavelength-to-time mapping.³⁵ The joint temporal distribution profile of the dispersed photon pairs is visualized in inset II of Fig. 1(b). By incorporating multiple selection windows, spaced identically by $γ$ , within the biphoton coincidence distribution envelope, the QMWP transversal filtering function is implemented. The visualized evolution of this process is displayed in inset III of Fig. 1(b). The theoretical model is described as follows: for a continuouswave-pumped spontaneous parametric downconversion (SPDC) process, the generated signal and idler photons exhibit well-known energy–time entanglement. Following the deduction in Ref. 28, the corresponding joint temporal wave function of the energy–time entangled biphoton source can be given by

Eq. (1)

Ψ (t_{1}, t_{2}) \propto \exp [- i (ω_{s, 0} t_{1} + ω_{i, 0} t_{2})] \exp [- \frac{σ^{2} (t_{1} - t_{2})^{2}}{2}],

where

t_{1}

and

t_{2}

denote the temporal coordinates of the emitted optical signal and idler photons, respectively,

ω_{s (i), 0}

denotes the center angular frequency of the signal (idler) photon, and

σ

is the correlation time of the twin photons. Then the idler photons are intensity modulated by the RF signal, while the signal photons pass through a dispersive medium for the (nonlocal) wavelength-to-time mapping. Assume the RF signal has a frequency

ω_{RF}

, its transfer function is given by

M (t_{2}) = 1 + A \cos (ω_{RF} t_{2})

, where

0 < A \leq 1

represents the modulation magnitude. The corresponding transfer function for the dispersive element with a dispersion parameter of

D

is given by

H (t_{1}) \propto \frac{1}{\sqrt{| D |}} \exp [- i (\frac{t_{1}^{2}}{2 D})]

. The resultant biphoton temporal waveform can be expressed as

Eq. (2)

Ψ^{'} (t_{1}, t_{2}) \propto \int d τ \exp [- \frac{σ^{2} (τ - t_{2})^{2}}{2}] \exp [- i \frac{(t_{1} - τ)^{2}}{2 D}] [1 + A \cos (ω_{RF} t_{2})],

whose square module defines the second-order Glauber correlation function

(G^{(2)})

, i.e.,

G^{(2)} \equiv | Ψ (t_{1}, t_{2}) |^{2}

, and is measured by the biphoton coincidence distribution. Based on the detailed deduction of

G^{(2)}

, as provided in Appendix B, the temporal density function of the signal and idler photons can be approximately expressed as

Eq. (3)

ρ_{s} (t_{1}) \propto \frac{2 π}{σ} [1 + A e^{- \frac{ω_{RF}^{2}}{4 σ^{2}}} e^{- \frac{σ^{2} D^{2} ω_{RF}^{2}}{4}} \cos (ω_{RF} t_{1}) \cos (\frac{D ω_{RF}^{2}}{2})],

Eq. (4)

ρ_{i} (t_{2}) \propto \frac{2 π}{σ} [1 + A \cos (ω_{RF} t_{2})] .

From Eqs. (3) and (4), one can see that the RF modulation on the idler photons can be nonlocally mapped onto their entangled counterparts. The dispersion in the signal photon path degrades the amplitude by a factor of $e^{- \frac{σ^{2} D^{2} ω_{RF}^{2}}{4}}$ and introduces the RF-dependent fading $[\cos (\frac{D ω_{RF}^{2}}{2})]$ to the recovered the RF signal. As demonstrated in Ref. 31, by appropriately selecting the width of the coincidence window, which is described by the function $F (t_{1} - t_{2}) = \exp [- \frac{(t_{1} - t_{2})^{2}}{2 α^{2}}]$ , it is possible to minimize the two adverse effects. In the subsequent discussion, we reveal that a straightforward modification of this function can significantly enhance the feasibility of RF signal processing. The modified function is expressed as

Eq. (5)

F^{'} (t_{1} - t_{2}) = \sum_{k} \exp [- \frac{(t_{1} - t_{2} - k γ)^{2}}{2 α^{2}}],

where

k

is an integer and represents the

k

th coincidence selection window, whose center has a deviation of

k γ

from that of the biphoton correlation distribution. The total number of

k

, which is taken is given by

N

, represents the total number of selection windows inside the biphoton wave packet.

α

and

γ

, respectively, denote the width of each coincidence selection window and the spacing between them. Assume

γ ≫ D ω_{RF}

and in the approximation of

α^{2}, \frac{1}{σ^{2}} ≪ D^{2} σ^{2}

, the resultant temporal density function of the signal photons can be deduced as

Eq. (6)

{ρ_{s}}^{'} (t_{1}) = \int d t_{2} | Ψ^{'} (t_{1}, t_{2}) |^{2} F^{'} (t_{1} - t_{2}) \propto \frac{2 π α}{D σ^{2}} {1 + A e^{- \frac{α^{2} ω_{RF}^{2}}{2 D^{2} σ^{4}}} \cos (\frac{ω_{RF}^{2}}{2 D σ^{4}}) \sum_{k} e^{- (\frac{k γ}{D σ})^{2}} \cos [ω_{RF} (t_{1} - k γ)]} .

For the case of $N = 1$ and $k = \pm 1$ , a QMWP phase shifter can be implemented, where the relative phase shift is generated by the displacement between the selection window and the biphoton correlation distribution. The relation between the phase shift and the displacement $γ$ can be described as $φ = \pm γ ω_{RF}$ . By changing the window displacement $γ$ , the phase shift can be flexibly tuned for a given $ω_{RF}$ . For the condition of $N = 3$ and $k = 0, - 1,1$ , a three-tap QMWP transversal filter is constructed, with the FSR being $FSR = 1 / γ$ . By increasing the number ( $N$ ) of coincidence selection windows, as long as all of them fall within the biphoton correlation distribution, the tap number of the filter can be flexibly extended.

3. Results

3.1.

Quantum Microwave Photonic Phase Shifter

To realize a phase shifter, the nonlocal RF signal mapping on the signal photons and its phase shifting based on the coincidence window selection technique is first investigated. The RF modulation is applied to the idler photons at a frequency of 2.08 GHz with a power of 10 dBm. When the dispersion compensation module (DCM) in the signal photon path is set to have a group delay dispersion (GDD) of $495 ps / nm$ , the measured full width at half-maximum (FWHM) of the biphoton coincidence distribution width is broadened to 300 ps. By applying different window selections of Fig. 2(a) to the biphoton coincidence distribution, the reconstructed waveforms of the signal and idler photons are plotted in Figs. 2(b) and 2(c), respectively. In these plots, we choose three different window displacements ( $γ$ ) relative to the center of the biphoton coincidence distribution: 0, 120, and 240 ps. The window width is fixed at 48 ps, achieved by selecting photons within specific time bins of the time-correlated single photon counting (TCSPC) measured histogram, which is comparable to the timing jitter of the superconductive nanowire single-photon detectors (SNSPDs). At $γ = 0 ps$ , both the signal and idler photon waveforms exhibit the same phase. As $γ$ increases, it becomes evident that the phase of dispersed signal photons undergoes a right-hand shift in their phase. However, the nondispersed idler photons remain unchanged, regardless of the window displacement. Additionally, it can be observed that the amplitude of the recovered microwave signal gradually decreases with increasing window displacement ( $γ$ ). This decrease is attributed to the reduced coincidence counts at positions deviating from the center of the biphoton coincidence distribution. To further clarify this effect, Fig. 2(d) plots the amplitudes of the recovered RF signals from the signal photon path as a function of the center displacement. We investigate three different modulation frequencies: 0.2 GHz (black squares), 4.1 GHz (orange dots), and 6.1 GHz (purple triangles). The solid lines represent the theoretical fittings to these results using Eq. (6), and we observe good agreement between the theoretical simulation and the experimental data. To evaluate the phase-shifting performance of the system with different window displacements, we extracted the phase of the signal photon waveforms at various window positions. Figure 2(e) shows the phase differences as a function of the window displacement for three modulation frequencies at 0.2 GHz (black squares), 4.1 GHz (orange dots), and 6.1 GHz (purple triangles). We can observe a linear correlation between the amount of phase shift and the window displacement. This demonstrates the fine-tuning capability of the phase shift for low modulation frequencies and the large dynamic range of the phase shift for high modulation frequencies. In our system, the time-bin resolution of the biphoton coincidence counts distribution is set to be 8 ps, leading to a minimum window displacement of $γ = 8 ps$ . The relationship between phase shift and window displacement, as derived from the theoretical analysis, is expressed as $φ = 2 π γ ω_{RF}$ . Considering the low modulation frequency of 0.2 GHz, the minimum achievable phase shift is calculated to be 0.01 rad. On the other hand, to ensure a good recovery of the signal photons’ waveforms for phase analysis, the maximum window displacement is limited to the FWHM of the biphoton coincidence distribution. Consequently, at the maximum window displacement, the dynamic range of the phase shift reaches a maximum value of 24.5 rad at the modulation frequency of 6.1 GHz, $\sim 7.8 π$ . To further validate this phase-shifting phenomenon, the phase differences as a function of the window displacement under the condition of $GDD = 826 ps / nm$ and different modulation frequencies are also investigated (see Appendix B).

Fig. 2

(a) Different window displacements in the biphoton coincidence distribution. (b), (c) The reconstructed waveforms from the signal and idler photons based on the coincidence window selection technique. Their center deviations are, respectively: (b1), (c1) $γ = 0$ ; (b2), (c2) $γ = 120 ps$ ; (b3), (c3) $γ = 240 ps$ ; and (d) the experimentally acquired amplitudes of the recovered RF signals from the signal photon path as a function of the center deviation. For all the results, the selected windows have a width of 48 ps. The GDD of the DCM is chosen as $495 ps / nm$ and the RF modulation is at 2.08 GHz. (e) The extracted phase shift as a function of the window displacement. Three modulation frequencies at 0.2, 4.1, and 6.1 GHz are investigated and shown by black squares, orange dots, and purple triangles, respectively.

3.2.

Quantum Microwave Photonic Filter

The multitap transversal filtering function using coincidence window selection is then evaluated by inserting a DCM with a GDD of $826 ps / nm$ in the signal photon path. To demonstrate a three-tap filter, we set three windows with displacements of -240, 0, 240 ps and identical widths of 48 ps as the tap. The MSLR, which indicates the sidelobe suppression capability of the filter, can be flexibly adjusted by assigning different weights to the windows. With the RF modulation frequency varying from 200 MHz to 8 GHz, the ratios between the amplitudes of the recovered RF waveform with dispersion and that without dispersion are investigated and plotted in Fig. 3 by blue diamonds. For three different weight configurations of the windows: (a1) 0.56:1:0.56, (a2) 0.75:1:0.75, and (a3) 1:1:1, the corresponding MSLR are, respectively, given by 10.62, 6.29, and 3.95 dB. The solid orange curve is the theoretical simulation result based on Eq. (6), which shows a nice agreement with the experimental results. Furthermore, we examine the dependence of MSLR on the weight ratio, which is plotted in Fig. 3(d). The experimental results align perfectly with the theoretical predictions. To investigate the FSR tunability of the three-tap filter, we fix the weight of the three windows at 0.56:1:0.56 and vary the spacing between the windows. Figures 3(b1)–3(b3) demonstrate the resulting FSR values of 8, 6, and 4 GHz, respectively, achieved by choosing window spacings of 240, 160, and 120 ps. The achieved FSR values, plotted in Fig. 3(e) as blue dots, exhibit an inverse dependence on the spacing ( $γ$ ) that aligns perfectly with the theoretical expectation. As the $Q$ factor of a filter is directly related to the number of taps,³² the increase of tap number is another important issue. By increasing the number of selection windows, a multitap filter can be realized. Figures 3(c1)–3(c3) illustrate the reconstructed multitap QMWP filters, implemented by introducing four, five, and seven selection windows to the biphoton coincidence distribution. The tap number of the filter can be conveniently adjusted by altering the number of windows. If a DCM with a larger GDD is utilized to broaden the biphoton coincidence width, it would be possible to increase the tap number of the filter. Figure 3(f) showcases the theoretically achievable maximum number of filter taps as a function of the biphoton coincidence width. The achievable maximum number of the filter taps as a function of the biphoton coincidence width $Δ$ should satisfy $N_{tap} = ⌊ \frac{Δ}{2 \ln 2 γ} ⌋$ , where $⌊ \dots ⌋$ represents the least integer function. The minimum window spacing is $γ \approx 112 ps$ , which is set by the maximum achievable FSR of 8.8 GHz. Then a maximum tap number of 14 can be achieved when the biphoton coincidence distribution width reaches 3700 ps at a GDD value of $1650 ps / nm$ .

Fig. 3

Illustration of the three-tap transversal filter based on applying three selection windows to the biphoton coincidence measurement. (a) The displacements of the three windows are set as $- 240$ , 0, and 240 ps, with their widths being identical to 48 ps. (a1)–(a3) Reconfigurable MSLR of the three-tap filter is investigated via setting the weights of the three windows at 0.56:1:0.56, 0.75:1:0.75, and 1:1:1, respectively. (b1)–(b3) The FSR tunability of the three-tap filter is investigated while the spacing between the windows is chosen as 240, 160, and 120 ps, and the weight of the three windows is fixed at 0.56:1:0.56. (c1)–(c3) Illustration of the multitap filter by increasing the number of selection windows four-tap, five-tap, and seven-tap, respectively. (d) Dependence of the MSLR on the weight ratio. (e) The relationship between FSR and the window spacing value. (f) The theoretically achieved maximum tap number as a function of biphoton coincidence width.

3.3.

Quantum Microwave Photonics Mixer

Benefiting from the nonlocal RF mapping characteristic of QMWP, the photonic RF mixing is also realized. For demonstrating the RF mixing, an RF signal ( $ω_{RF 1}$ ) at a frequency of 5 GHz and with a modulation power of 10 dBm is intensity modulated onto the signal photons, whose temporal waveform is Fourier-transformed and shown in Fig. 4(a1). At the same time, an RF signal at a frequency of 1 GHz ( $ω_{RF 2}$ ) and with a modulation power of 10 dBm is intensity-modulated onto the idler photons, whose temporal waveform is Fourier-transformed and shown in Fig. 4(a2). Applying coincidence-based postselection, the Fourier spectra of the reconstructed temporal waveforms from the signal and idler photons are then given in Figs. 4(b1) and 4(b2). One can see that the signal and idler photons not only acquire the RF component carried by their twins but also give rise to the sum frequency ( $ω_{RF 1} + ω_{RF 2}$ ) and difference frequency ( $ω_{RF 1} - ω_{RF 2}$ ) of the two RF components. To eliminate the individual RF components from the RF mixing components, a filter is required. Installing a DCM with a GDD of 826 ps/nm in the idler photon path, a two-tap transversal filter is then designed by utilizing the afore-mentioned coincidence window selection technique, whose filtering function is shown in Fig. 4(c1). After the filtering manipulation, the Fourier spectrum of the idler photon waveform is shown in Fig. 4(c2), which contains only the difference frequency and sum frequency components. Finally, in Fig. 4(d1), the Chebyshev digital-filtering algorithm³⁶ is employed to realize an output with either sum or difference frequency, as demonstrated in Fig. 4(d2).

Fig. 4

Fourier spectra of the RF-modulated signal photons at 5 GHz (a1) and the RF-modulated idler photons at 1 GHz (a2). Fourier spectra of the signal photon waveform (b1) and the idler photon waveform (b2) after the nonlocal RF signal mapping. (c1) The frequency response of the designed two-tap filter. (c2) Fourier spectrum of the idler photon waveform after the two-tap frequency filtering manipulation. (d1) The frequency response of a designed digital filter designed based on the Chebyshev algorithm. (d2) Fourier spectrum of the idler photon waveform after the digital-filtering manipulation.

4. Discussion and Conclusion

The microwave photonic phase shifter developed in this study exhibits exceptional linearity across the entire frequency spectrum, including low-, medium-, and high-frequency bands. This addresses a common issue observed in classical phase shifters, where phase linearity tends to degrade at higher frequencies.³⁷ Under a specific window displacement condition, the maximum achievable phase shift is determined by the detectable microwave signal bandwidth of the system. In our system, the utilized SNSPD has a timing jitter of $\sim 50 ps$ (FWHM). According to the Fourier transformation law, it sets the maximum detection frequency bandwidth to be about 8.8 GHz.²⁷ Consequently, the calculated maximum phase-shift range can reach $18.21 π$ under the condition of a maximum window displacement of 520 ps and a GDD value of $826 ps / nm$ . By the same token, the maximum detection frequency bandwidth also determines the maximum FSR that can be obtained by the QMWP filter. As the maximum tunable FSR bandwidth is limited to about 8.8 GHz, it means that the minimum spacing between windows should be larger than 112 ps. In our system, the single photons’ bandwidth after SPDC is $\sim 2.4 nm$ . After undergoing dispersion in a DCM with a GDD value of 826 ps/nm, the biphoton coincidence distribution is broadened to having an FWHM of 790 ps. As the tap number cannot be freely increased, since all the windows should be located within the FWHM of the biphoton coincidence distribution, the maximum achievable tap number is limited to 7. The current state-of-the-art SNSPDs can achieve a remarkable sub-10 ps timing jitter.³⁸^,³⁹ By utilizing such advanced SNSPDs, the FSR can be increased to 44 GHz, and a maximum tap number of 35 can be achieved with the same dispersion incorporated into the system. As the $Q$ factor is directly related to the number of taps used in its implementation, the $Q$ factor of the QMWP filter can be significantly improved. In contrast to the classical MWP, the QMWP RF filter presents good immunity to the dispersion-induced frequency fading effect associated with the broadband optical carrier. The method of increasing the number of taps solely through postselection eliminates the need for a significant number of multiwavelength lasers or alternative equipment, effectively reducing associated costs. Additionally, compared to filter designs based on optical waveshapers, this approach overcomes the limitation imposed on the number of taps by the spectral resolution achievable with a single grating used in the optical waveshaper, offering enhanced flexibility in tap adjustment. The QMWP mixer in our system functions similarly to conventional microwave photonic mixers, where a series connection of two electro-optic intensity modulators is typically employed.¹⁹ However, our system offers enhanced flexibility through the coincidence window selection technique, which eliminates the need to fix the center wavelength of the optical filter. Furthermore, this technique ensures insensitivity to environmental changes while effectively suppressing fundamental frequencies without affecting the output mixing frequency. The conversion loss for this QMWP RF mixer is calculated to be $\sim 10$ to 13 dB, which is higher compared with the conversion loss value of classical microwave photonic mixers, typically ranging from 5 to 10 dB. Despite this higher loss, we can achieve a remarkable isolation level of 20 dB, which is defined as the ratio of the leakage power at the output to the input RF signal power. This high level of isolation ensures the effective suppression of unwanted signals and minimizes their interference with the desired output.

In conclusion, we have introduced a quantum microwave signal processing system that incorporates the coincidence window selection technique. This system seamlessly integrates a microwave photonic phase shifter, microwave photonic filter, and microwave photonic mixer. The phase shifter enables precise and versatile phase shift adjustments through window displacements. By manipulating the ratio of photons within the window and adjusting window spacings, we can achieve a three-tap filter with adjustable MSLRs and tunable FSRs. Compared to previous multitap filtering methods that rely on the application of the programmable waveshaper to the photon carrier, our approach offers a cost-effective solution by simply increasing the number of windows within the biphoton wave packet. Additionally, our system features an innovative microwave photonic mixer structure that utilizes nonlocal RF signal mapping and a reconfigurable multitap filtering function. This design enhances the functionality and flexibility of signal-processing applications. Overall, our proposed system showcases the potential of quantum microwave signal-processing techniques and opens up new possibilities for advanced communication systems.

5. Appendix A: Materials and Methods

The experimental setup of the QMWP signal processing system is shown in Fig. 5. The energy–time-entangled photon pairs are generated from a piece of 10 mm long, type-II PPLN waveguide pumped by a CW laser at 780 nm.⁴⁰ The idler photons are intensity-modulated by a Mach–Zehnder modulator (PowerBitTM F10-0, Oclaro), through which the high-speed RF signal from a signal generator (E8257D, KeySight) is loaded. The signal photons are fed into a fiber-Bragg-grating-based DCM (Proximion AB) for realizing the dispersion-induced phase shifting. Afterward, the signal and idler photons are, respectively, detected by the low-jitter SNSPD1 and SNSPD2 (Photec) with their timing jitter being about 50 ps in FWHM (all the mentioned widths in the text refers to the FWHM), which determines the minimum width of the selection window. The two SNSPD outputs are then fed into a TCSPC module (PicoQuant Hydraharp 400), which is operated in the time-tagged time-resolved T3 mode, with its time-bin resolution being set as 8 ps. The 10 MHz time base from the signal generator E8257D is used for establishing phase stabilization between the RF signal and the sync signal. By manipulating appropriate selection windows on the measured biphoton coincidence distribution, the signal photons can be selected to build the temporal waveforms with desired phase shifting or filtering features.

Fig. 5

Experimental setup. EOM, electro-optic modulator; DCM, dispersion compensation module; SNSPD, superconductive nanowire single-photon detector; RF signal, radio-frequency signal; and TCSPC, time-correlated single-photon counting.

6. Appendix B: Theory

6.1.

Theory of the QMWP Signal Processing

The detailed theoretical deduction starts from Eq. (1). The energy–time-entangled biphoton source is utilized as the optical carrier; its two-photon spectral wave function in the time domain can be given by

Eq. (7)

Ψ (t_{1}, t_{2}) \propto \exp [- i (ω_{s, 0} t_{1} + ω_{i, 0} t_{2})] \exp [- \frac{σ^{2} (t_{1} - t_{2})^{2}}{2}],

where

t_{1}

and

t_{2}

denote the temporal coordinates of the emitted optical signal and idler photons, respectively.

ω_{s (i), 0}

denotes the center angular frequency of the signal (idler) photon, and

σ

is the correlation time of the twin photons. In the experimental scheme, the RF signal with a frequency

ω_{RF}

is intensity-modulated onto the idler photons, while the signal photons traverse a dispersive medium with a dispersion parameter of

D

. If the transfer function of the RF modulation is directly added to the square module of the two-photon temporal wave function, which corresponds to the joint intensity of the biphotons, the phase information will be completely lost. Therefore, in our theoretical deduction, the transfer function of the RF modulation is applied to the two-photon temporal wave function. The resultant biphoton temporal waveform can be expressed as

Eq. (8)

Ψ^{'} (t_{1}, t_{2}) \propto \int d τ \exp [- \frac{σ^{2} (τ - t_{2})^{2}}{2}] \exp [- i \frac{(t_{1} - τ)^{2}}{2 D}] [1 + A \cos (ω_{RF} t_{2})],

whose square module (i.e., the second-order Glauber correlation function) is then deduced as

Eq. (9)

G^{(2)} = | Ψ^{'} (t_{1}, t_{2}) |^{2} \propto \frac{2 π}{\sqrt{1 + D^{2} σ^{4}}} {e^{- \frac{(t_{1} - t_{2})^{2}}{2 (\frac{1}{σ^{2}} + D^{2} σ^{24})}} + \frac{A^{2}}{4} e^{\frac{- σ^{2} (t_{1} - t_{2} + D ω_{RF})^{2}}{1 + (D + D^{'})^{2} σ^{4}}} + \frac{A^{2}}{4} e^{\frac{- σ^{2} (t_{1} - t_{2} - D ω_{RF})^{2}}{1 + (D + D^{'})^{2} σ^{4}}} + A e^{- \frac{(t_{1} - t_{2})^{2}}{2 (\frac{1}{σ^{2}} + D^{2} σ^{24})}} e^{\frac{- σ^{2} (t_{1} - t_{2} + D ω_{RF})^{2}}{2 (1 + D^{2} σ^{4})}} \cos [\frac{ω_{RF} (t_{2} + D^{2} σ^{4} t_{1} - \frac{D ω_{RF}}{2})}{1 + D^{2} σ^{4}}] + A e^{- \frac{(t_{1} - t_{2})^{2}}{2 (\frac{1}{σ^{2}} + D^{2} σ^{24})}} e^{\frac{- σ^{2} (t_{1} - t_{2} - D ω_{RF})^{2}}{2 (1 + D^{2} σ^{4})}} \cos [\frac{ω_{RF} (t_{2} + D^{2} σ^{4} t_{1} + \frac{D ω_{RF}}{2})}{1 + D^{2} σ^{4}}] + \frac{A^{2}}{2} e^{\frac{- σ^{2} (t_{1} - t_{2} - D ω_{RF})^{2}}{2 (1 + D^{2} σ^{4})}} e^{\frac{- σ^{2} (t_{1} - t_{2} + D ω_{RF})^{2}}{2 (1 + D^{2} σ^{4})}} \cos [\frac{2 ω_{RF} (t_{2} + D^{2} σ^{4} t_{1})}{1 + D^{2} σ^{4}}]} .

It shows that the biphoton correlation width broadens from $\frac{1}{σ}$ to $D σ$ due to the dispersion effect. In the far-field approximation ( $\frac{1}{σ^{2}} ≪ D^{2} σ^{2}$ ), by performing marginal integration over the temporal coordinates of $t_{1}$ and $t_{2}$ , the temporal density function of the signal and idler photons can be approximately expressed as

Eq. (10)

ρ_{s} (t_{1}) \propto \frac{2 π}{σ} [1 + \frac{A^{2}}{2} + 2 A e^{- \frac{ω_{RF}^{2}}{4 σ^{2}}} e^{- \frac{σ^{2} D^{2} ω_{RF}^{2}}{4}} \cos (ω_{RF} t_{1}) \cos (\frac{D ω_{RF}^{2}}{2}) + \frac{A^{2}}{2} e^{- \frac{ω_{RF}^{2}}{σ^{2}}} e^{- σ^{2} D^{2} ω_{RF}^{2}} \cos (2 ω_{RF} t_{1})],

Eq. (11)

ρ_{i} (t_{2}) \propto \frac{2 π}{σ} [1 + \frac{A^{2}}{2} + 2 A \cos (ω_{RF} t_{2}) + \frac{A^{2}}{2} \cos (2 ω_{RF} t_{2})] .

Note should be taken that the terms related to the $2 ω_{RF}$ components are derived as the result of squaring the modulus of the RF-modulated two-photon temporal wave function and should play no roles in the conclusion. Therefore, the above formula should be reduced to

Eq. (12)

ρ_{s} (t_{1}) \propto \frac{2 π}{σ} [1 + A e^{- \frac{ω_{RF}^{2}}{4 σ^{2}}} e^{- \frac{σ^{2} D^{2} ω_{RF}^{2}}{4}} \cos (ω_{RF} t_{1}) \cos (\frac{D ω_{RF}^{2}}{2})],

Eq. (13)

ρ_{i} (t_{2}) \propto \frac{2 π}{σ} [1 + A \cos (ω_{RF} t_{2})] .

6.2.

Performance Validation of Quantum Microwave Photonic Phase Shifter

To further validate the QMWP phase-shifting performance, we used a DCM with a GDD of $826 ps / nm$ in the system. By applying an RF modulation at 0.81 GHz with a power level of 10 dBm, the reconstructed waveforms of the signal and idler photons for different window displacements ( $γ = 0 ps$ , $γ = 200 ps$ , and $γ = 400 ps$ ) are plotted in Figs. 6(b) and 6(c), respectively. As expected, the phase of the nondispersed idler photon waveform remains unchanged regardless of the window displacement, and the dispersed signal photon waveform undergoes a right-hand shift in their phase. Similar to the results shown in Fig. 2(c), the recovered microwave signal gradually decreases as the window displacement increases. We also investigated the amplitudes of the recovered RF signals for three different modulation frequencies (0.2, 2.5, and 4.9 GHz) in Fig. 6(c). By applying Eq. (9) to the experimental results, we observed good agreement with the theoretical fittings. Furthermore, we plotted the phase shift as a function of the window displacement for modulation frequencies of 0.2, 2.5, and 4.9 GHz in Fig. 6(d). At the high modulation frequency of 4.9 GHz, we achieved a maximum dynamic phase shift range of $10.2 π$ .

Fig. 6

(a) Different window displacements in the biphoton coincidence distribution. (b), (c) The reconstructed waveforms from the signal and idler photons based on the coincidence window selection technique. Their center deviations are, respectively: (b1), (c1) $γ = 0 ps$ ; (b2), (c2) $γ = 200 ps$ ; and (b3), (c3) $γ = 400 ps$ . (d) The experimentally acquired amplitudes of the recovered RF signals from the signal photon path as a function of the center deviation. For all the results, the selected windows have a width of 48 ps. The GDD of the DCM is chosen as $495 ps / nm$ , and the RF modulation is at 0.81 GHz. (e) The extracted phase shift as a function of the window displacement. Three modulation frequencies at 0.2, 2.5, and 4.9 GHz are investigated and shown by black squares, orange dots, and purple triangles, respectively.

Disclosures

The authors declare that they have no conflicts of interest.

Code and Data Availability

The data that support the findings of this study are available from the authors upon reasonable request.

Acknowledgments

This work was supported by the National Natural Science Foundation of China (Grant Nos. 12033007, 61801458, 12103058, 12203058, 12074309, and 61875205), the Youth Innovation Promotion Association, CAS (Grant Nos. 2021408, 2022413, and 2023425), and the China Postdoctoral Science Foundation (Grant No. 2022M723174).

References

1.

A. J. Seeds and K. J. Williams, “Microwave photonics,” J. Lightwave Technol., 24 (12), 4624 –8641 https://doi.org/10.1109/JLT.2006.885787 JLTEDG 0733-8724 (2007). Google Scholar

2.

J. Capmany and D. Novak, “Microwave photonics combines two worlds,” Nat. Photonics, 1 (6), 319 –330 https://doi.org/10.1038/nphoton.2007.89 NPAHBY 1749-4885 (2007). Google Scholar

3.

D. Marpaung et al., “Integrated microwave photonics,” Laser Photonics Rev., 7 (4), 506 –538 https://doi.org/10.1002/lpor.201200032 (2013). Google Scholar

4.

J. Yao and J. Capmany, “Microwave photonics,” Sci. China Inf. Sci., 65 (12), 1 –64 https://doi.org/10.1007/s11432-021-3524-0 (2022). Google Scholar

5.

K. Xu et al., “Microwave photonics: radio-over-fiber links, systems, and applications,” Photonics Res., 2 (4), B54 –B63 https://doi.org/10.1364/PRJ.2.000B54 (2014). Google Scholar

6.

T. Kawanishi, “THz and photonic seamless communications,” J. Lightwave Technol., 37 (7), 1671 –1679 https://doi.org/10.1109/JLT.2019.2897042 JLTEDG 0733-8724 (2019). Google Scholar

7.

Z. Zhang et al., “Photonic radar for contactless vital sign detection,” Nat. Photonics, 17 (9), 791 –797 https://doi.org/10.1038/s41566-023-01245-6 NPAHBY 1749-4885 (2023). Google Scholar

8.

S. S. S. Panda et al., “Recent advances and future directions of microwave photonic radars: a review,” IEEE Sens. J., 21 (19), 21144 –21158 https://doi.org/10.1109/JSEN.2021.3099533 ISJEAZ 1530-437X (2021). Google Scholar

9.

F. A. Miranda and G. Subramanyam, “Design and development of ferroelectric tunable microwave components for Ku and k-band satellite communication systems,” IEEE Trans. Microw. Theory Tech., 48 (7), 1181 –1189 https://doi.org/10.1109/22.853458 (2000). Google Scholar

10.

T. Hao et al., “Breaking the limitation of mode building time in an optoelectronic oscillator,” Nat. Commun., 9 (1), 1839 –1845 https://doi.org/10.1038/s41467-018-04240-6 NCAOBW 2041-1723 (2018). Google Scholar

11.

T. Hao et al., “Optoelectronic parametric oscillator,” Light Sci. Appl., 9 (1), 102 –107 https://doi.org/10.1038/s41377-020-0337-5 (2020). Google Scholar

12.

W. Xue et al., “Wideband 360 degrees microwave photonic phase shifter based on slow light in semiconductor optical amplifiers,” Opt. Express, 18 (6), 6156 –6163 https://doi.org/10.1364/OE.18.006156 OPEXFF 1094-4087 (2010). Google Scholar

13.

J. Lloret et al., “Broadband microwave photonic fully tunable filter using a single heterogeneously integrated III-V/SOI-microdisk-based phase shifter,” Opt. Express, 20 (10), 10796 https://doi.org/10.1364/OE.20.010796 OPEXFF 1094-4087 (2012). Google Scholar

14.

Z. Tao et al., “Highly reconfigurable silicon integrated microwave photonic filter towards next-generation wireless communication,” Photonics Res., 11 (5), 682 –689 https://doi.org/10.1364/PRJ.476466 (2023). Google Scholar

15.

R. Maram et al., “Programmable fiber-optics microwave photonic filter based on temporal talbot effects,” in Int. Topical Meeting on Microwave Photonics (MWP), 1 –4 (2018). Google Scholar

16.

V. R. Supradeepa et al., “Comb-based radiofrequency photonic filters with rapid tunability and high selectivity,” Nat. Photonics, 6 (3), 186 –194 https://doi.org/10.1038/nphoton.2011.350 NPAHBY 1749-4885 (2012). Google Scholar

17.

E. H. W. Chan and R. A. Minasian, “High conversion efficiency microwave photonic mixer based on stimulated Brillouin scattering carrier suppression technique,” Opt. Lett., 38 (24), 5292 –5295 https://doi.org/10.1364/OL.38.005292 OPLEDP 0146-9592 (2013). Google Scholar

18.

A. Bakshi and A. Sheetal, “Microwave photonic up and down converter,” Int. J. Adv. Res., 4 (5), 259 –262 https://doi.org/10.21474/IJAR01/500 (2016). Google Scholar

19.

G. K. Gopalakrishnan and W. K. Burns, “Microwave-optical mixing in

{LiNbO}_{3}

modulators,” IEEE Trans. Microw. Theory Tech., 41 (12), 2383 –2391 https://doi.org/10.1109/22.260732 (1993). Google Scholar

20.

T. Hao et al., “Quantum microwave photonics,” J. Lightwave Technol., 40 (20), 6616 –6625 https://doi.org/10.1109/JLT.2022.3176303 JLTEDG 0733-8724 (2022). Google Scholar

21.

A. Antonio et al., “The quantum technologies roadmap: a European community view,” New J. Phys., 20 (8), 080201 https://doi.org/10.1088/1367-2630/aad1ea NJOPFM 1367-2630 (2018). Google Scholar

22.

H. Zhang et al., “Realization of quantum secure direct communication over 100 km fiber with time-bin and phase quantum states,” Light Sci. Appl., 11 (5), 83 https://doi.org/10.1038/s41377-022-00769-w (2022). Google Scholar

23.

E. D. Lopaeva et al., “Experimental realization of quantum illumination,” Phys. Rev. Lett., 110 (15), 153603 https://doi.org/10.1103/PhysRevLett.110.153603 PRLTAO 0031-9007 (2013). Google Scholar

24.

Y. Liu et al., “Implementation of quantum synchronization over a 20-km fiber distance based on frequency-correlated photon pairs and HOM interference,” Appl. Phys. Lett., 119 (14), 144003 https://doi.org/10.1063/5.0061478 APPLAB 0003-6951 (2021). Google Scholar

25.

A. W. Elshaari et al., “Hybrid integrated quantum photonic circuits,” Nat. Photonics, 14 (5), 285 –298 https://doi.org/10.1038/s41566-020-0609-x NPAHBY 1749-4885 (2020). Google Scholar

26.

F. R. Giorgetta et al., “Optical two-way time and frequency transfer over free space,” Nat. Photonics, 7 (6), 434 –438 https://doi.org/10.1038/nphoton.2013.69 NPAHBY 1749-4885 (2013). Google Scholar

27.

Y. Yang et al., “Single-photon microwave photonics,” Sci. Bull., 67 (7), 700 –706 https://doi.org/10.1016/j.scib.2021.11.019 (2022). Google Scholar

28.

Y. Jin et al., “Quantum microwave photonics in radio-over-fiber systems,” Photonics Res., 10 (7), 1669 https://doi.org/10.1364/PRJ.453934 (2022). Google Scholar

29.

Y. Jin et al., “Surpassing the classical limit of the microwave photonic frequency fading effect by quantum microwave photonics,” Photonics Res., 11 (6), 1094 –1099 https://doi.org/10.1364/PRJ.484142 (2023). Google Scholar

30.

J. Xu et al., “Reciprocating reflective double gratings based LCOS spectral filter with sharp response,” J. Lightwave Technol., 39 (99), 3961 –3966 https://doi.org/10.1109/JLT.2020.3047832 JLTEDG 0733-8724 (2020). Google Scholar

31.

Y. Jin et al., “Maximization of RF-signal recovery in quantum microwave photonics systems,” Phys. Rev. Appl., 21 (2), 024020 https://doi.org/10.1103/PhysRevApplied.21.024020 PRAHB2 2331-7019 (2024). Google Scholar

32.

J. Capmany, “Discrete-time optical processing of microwave signals,” J. Lightwave Technol., 23 (2), 702 –723 https://doi.org/10.1109/JLT.2004.838819 JLTEDG 0733-8724 (2005). Google Scholar

33.

V. Averchenko et al., “Temporal shaping of single photons enabled by entanglement,” Phys. Rev. A, 96 (4), 043822 https://doi.org/10.1103/PhysRevA.96.043822 (2017). Google Scholar

34.

V. Averchenko et al., “Efficient generation of temporally shaped photons using nonlocal spectral filtering,” Phys. Rev. A, 101 (1), 013808 https://doi.org/10.1103/PhysRevA.101.013808 (2020). Google Scholar

35.

M. Li et al., “Inherent resolution limit on nonlocal wavelength-to-time mapping with entangled photon pairs,” Opt. Express, 28 (5), 7488 –7497 https://doi.org/10.1364/OE.387146 OPEXFF 1094-4087 (2020). Google Scholar

36.

M. Schulist, “Improvements of a complex fir filter design algorithm,” Signal Process., 20 (1), 81 –90 https://doi.org/10.1016/0165-1684(90)90078-D (1990). Google Scholar

37.

H. Yoo et al., “Broadband tunable beam steering with a broadband and linear phase shifter,” Micow. Opt. Technol. Lett., 56 (8), 1830 –1832 https://doi.org/10.1002/mop.28457 (2014). Google Scholar

38.

A. Korneev et al., “Single-photon detection system for quantum optics applications,” IEEE J. Sel. Top Quantum Electron., 13 (4), 944 –951 https://doi.org/10.1109/JSTQE.2007.903856 (2007). Google Scholar

39.

M. Colangelo et al., “Impedance-matched differential superconducting nanowire detectors,” Phys. Rev. Appl., 19 (4), 044093 https://doi.org/10.1103/PhysRevApplied.19.044093 PRAHB2 2331-7019 (2023). Google Scholar

40.

Y. Liu et al., “All-fiber telecom band energy-time entangled biphoton source,” Chin. Opt. Lett., 21 (3), 032701 https://doi.org/10.3788/COL202321.032701 CJOEE3 1671-7694 (2023). Google Scholar

Biographies of the authors are not available.

CC BY: © The Authors. Published by SPIE and CLP under a Creative Commons Attribution 4.0 International License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.

Citation Download Citation

Xinghua Li, Yifan Guo, Xiao Xiang, Runai Quan, Mingtao Cao, Ruifang Dong, Tao Liu, Ming Li, and Shougang Zhang "Versatile quantum microwave photonic signal processing platform based on coincidence window selection technique," Advanced Photonics Nexus 3(5), 056013 (31 July 2024). https://doi.org/10.1117/1.APN.3.5.056013

Received: 18 February 2024; Accepted: 5 July 2024; Published: 31 July 2024

Access the abstract

JOURNAL ARTICLE
10 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

KEYWORDS

Windows

Tunable filters

Microwave photonics

Signal processing

Signal filtering

Phase shifts

Picosecond phenomena

1.

Introduction

2.

Theoretical Principle

Fig. 1

Eq. (1)

Eq. (2)

Eq. (3)

Eq. (4)

Eq. (5)

Eq. (6)

3.

Results

3.1.

Quantum Microwave Photonic Phase Shifter

Fig. 2

3.2.

Quantum Microwave Photonic Filter

Fig. 3

3.3.

Quantum Microwave Photonics Mixer

Fig. 4

4.

Discussion and Conclusion

5.

Appendix A: Materials and Methods

Fig. 5

6.

Appendix B: Theory

6.1.

Theory of the QMWP Signal Processing

Eq. (7)

Eq. (8)

Eq. (9)

Eq. (10)

Eq. (11)

Eq. (12)

Eq. (13)

6.2.

Performance Validation of Quantum Microwave Photonic Phase Shifter

Fig. 6

Disclosures

Code and Data Availability

Acknowledgments

References

Show All Keywords

Keywords/Phrases

Search In:

Publication Years