Open Access
1 July 2011 Near-ultraviolet removal rates for subgingival dental calculus at different irradiation angles
Author Affiliations +
Funded by: U.S. Department of Energy Office of Inertial Confinement Fusion
Abstract
The laser ablation rate of subgingival dental calculus irradiated at a 400-nm-wavelength, 7.4-mJ pulse energy, and 85- and 20-deg irradiation angles is measured using laser triangulation. Three-dimensional images taken before and after irradiation create a removal map with 6-μm axial resolution. Fifteen human teeth with subgingival calculus are irradiated in vitro under a cooling water spray with an ∼300-μm-diam, tenth-order super-Gaussian beam. The average subgingival calculus removal rates for irradiation at 85 and 20 deg are 11.1±3.6 and 11.5±5.9 μm/pulse, respectively, for depth removal and 4.5±1.7×105 and 4.8±2.3×105 μm3/pulse, respectively, for volume removal. The ablation rate is constant at each irradiation site but varies between sites because of the large differences in the physical and optical properties of calculus. Comparison of the average depth- and volume-removal rates does not reveal any dependence on the irradiation angle and is likely due to the surface topology of subgingival calculus samples that overshadows any expected angular dependence.
©(2011) Society of Photo-Optical Instrumentation Engineers (SPIE)
Joshua E. Schoenly, Wolf D. Seka, and Peter Rechmann "Near-ultraviolet removal rates for subgingival dental calculus at different irradiation angles," Journal of Biomedical Optics 16(7), 071404 (1 July 2011). https://doi.org/10.1117/1.3564907
Published: 1 July 2011
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calculus

Teeth

Laser ablation

Microscopes

Near ultraviolet

Laser dentistry

Tissue optics

Back to Top