16 March 2018 Multiview point clouds denoising based on interference elimination
Yang Hu, Qian Wu, Le Wang, Huanyu Jiang
Author Affiliations +
Abstract
Newly emerging low-cost depth sensors offer huge potentials for three-dimensional (3-D) modeling, but existing high noise restricts these sensors from obtaining accurate results. Thus, we proposed a method for denoising registered multiview point clouds with high noise to solve that problem. The proposed method is aimed at fully using redundant information to eliminate the interferences among point clouds of different views based on an iterative procedure. In each iteration, noisy points are either deleted or moved to their weighted average targets in accordance with two cases. Simulated data and practical data captured by a Kinect v2 sensor were tested in experiments qualitatively and quantitatively. Results showed that the proposed method can effectively reduce noise and recover local features from highly noisy multiview point clouds with good robustness, compared to truncated signed distance function and moving least squares (MLS). Moreover, the resulting low-noise point clouds can be further smoothed by the MLS to achieve improved results. This study provides the feasibility of obtaining fine 3-D models with high-noise devices, especially for depth sensors, such as Kinect.
© 2018 SPIE and IS&T 1017-9909/2018/$25.00 © 2018 SPIE and IS&T
Yang Hu, Qian Wu, Le Wang, and Huanyu Jiang "Multiview point clouds denoising based on interference elimination," Journal of Electronic Imaging 27(2), 023009 (16 March 2018). https://doi.org/10.1117/1.JEI.27.2.023009
Received: 9 August 2017; Accepted: 23 February 2018; Published: 16 March 2018
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Clouds

Denoising

3D modeling

Sensors

Lawrencium

Data modeling

Ear

Back to Top