Characterization of office laser printers for 3-D printing of soft tissue CT phantoms

Andreas Gerbl; Marcel Lewin; Tim Zeiske; Marco Ziegert; Felix Benjamin Schwarz; Bernd Hamm; Michael Scheel; Paul Jahnke

doi:10.1117/1.JMI.6.2.021602

20 February 2019 Characterization of office laser printers for 3-D printing of soft tissue CT phantoms

Andreas Gerbl, Marcel Lewin, Tim Zeiske, Marco Ziegert, Felix Benjamin Schwarz, Bernd Hamm, Michael Scheel, Paul Jahnke

Author Affiliations +

Journal of Medical Imaging, Vol. 6, Issue 2, 021602 (February 2019). https://doi.org/10.1117/1.JMI.6.2.021602

Abstract

The purpose of our study is to develop and evaluate a method for radiopaque 3-D printing (R3P) of soft tissue computed tomography (CT) phantoms with office laser printers. Five laser printers from different vendors are tested for toner CT attenuation. A liver phantom is created by printing CT images of a patient liver on office paper. One thousand eight hundred sixty paper sheets are printed with three repeated prints per page, resulting in a stack of 18.6 cm. The phantom is examined with 12 tube current settings. Images are reconstructed using filtered back projection (FBP) and iterative reconstruction [adaptive iterative dose reduction 3D (AIDR 3D)]. Seven radiologists rated image quality of all acquisitions. Toner attenuation of all investigated printers increased linearly with the print template grayscale. The liver phantom reproduced anatomic detail and attenuation values of the patient (mean ± SD HU difference 12.68 ± 7.74). Image quality scores increased with dose but did not vary significantly above a threshold dose for AIDR 3D. Overall, AIDR 3D reconstructed images are rated superior to FBP reconstructions (p < 0.001). In conclusion, R3P with standard office laser printers can generate soft tissue CT phantoms without hardware manipulations but with limited flexibility regarding attenuation properties of the printed toner material.

Citation Download Citation

Andreas Gerbl, Marcel Lewin, Tim Zeiske, Marco Ziegert, Felix Benjamin Schwarz, Bernd Hamm, Michael Scheel, and Paul Jahnke "Characterization of office laser printers for 3-D printing of soft tissue CT phantoms," Journal of Medical Imaging 6(2), 021602 (20 February 2019). https://doi.org/10.1117/1.JMI.6.2.021602

Received: 31 July 2018; Accepted: 27 December 2018; Published: 20 February 2019

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available