Design and simulation of MEMS-actuated adjustable optical wedge for laser beam scanners

Ahmed S. Bahgat; Ahmed H. Zaki; Mohamed Abdo Mohamed; Ashraf Fathy El Sherif

doi:10.1117/1.JMM.17.1.015501

25 January 2018 Design and simulation of MEMS-actuated adjustable optical wedge for laser beam scanners

Ahmed S. Bahgat, Ahmed H. Zaki, Mohamed Abdo Mohamed, Ashraf Fathy El Sherif

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 17, Issue 1, 015501 (January 2018). https://doi.org/10.1117/1.JMM.17.1.015501

Abstract

This paper introduces both optical and mechanical design and simulation of large static deflection MOEMS actuator. The designed device is in the form of an adjustable optical wedge (AOW) laser scanner. The AOW is formed of 1.5-mm-diameter plano-convex lens separated by air gap from plano-concave fixed lens. The convex lens is actuated by staggered vertical comb drive and suspended by rectangular cross-section torsion beam. An optical analysis and simulation of air separated AOW as well as detailed design, analysis, and static simulation of comb -drive are introduced. The dynamic step response of the full system is also introduced. The analytical solution showed a good agreement with the simulation results. A general global minimum optimization algorithm is applied to the comb-drive design to minimize driving voltage. A maximum comb-drive mechanical deflection angle of 12 deg in each direction was obtained under DC actuation voltage of 32 V with a settling time of 90 ms, leading to 1-mm one-dimensional (1-D) steering of laser beam with continuous optical scan angle of 5 deg in each direction. This optimization process provided a design of larger deflection actuator with smaller driving voltage compared with other conventional devices. This enhancement could lead to better performance of MOEMS-based laser beam scanners for imaging and low-speed applications.

Citation Download Citation

Ahmed S. Bahgat, Ahmed H. Zaki, Mohamed Abdo Mohamed, and Ashraf Fathy El Sherif "Design and simulation of MEMS-actuated adjustable optical wedge for laser beam scanners," Journal of Micro/Nanolithography, MEMS, and MOEMS 17(1), 015501 (25 January 2018). https://doi.org/10.1117/1.JMM.17.1.015501

Received: 26 September 2017; Accepted: 29 December 2017; Published: 25 January 2018

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE