1 April 2007 Micro-electromechanical systems variable optical attenuator based on nonsilicon surface micromachining technology
Xuhan Dai, Xiaolin Zhao, Guifu Ding, Bingchu Cai
Author Affiliations +
Abstract
A novel, electromagnetically driven variable fiber optic attenuator based on micro-electromechanical system (MEMS) technology is described. The attenuation level is adjusted by changing the microshutter position in the optical path. A new technique, termed "nonsilicon surface micromachining," is used to fabricate the shutter, in which a copper layer was used as the sacrificial layer, and the electroplated FeNi as the structure layer. This scheme provides another way to fabricate the optical microstructure. The optical characteristics of the attenuator are theoretically analyzed, and the result is verified by experiments. The MEMS attenuator has fiber-to-fiber insertion loss less than 3 dB at 1550-nm wavelength, dynamic range greater than 40 dB, 0.2-dB repeatability, and return loss better than 40 dB.
©(2007) Society of Photo-Optical Instrumentation Engineers (SPIE)
Xuhan Dai, Xiaolin Zhao, Guifu Ding, and Bingchu Cai "Micro-electromechanical systems variable optical attenuator based on nonsilicon surface micromachining technology," Journal of Micro/Nanolithography, MEMS, and MOEMS 6(2), 023010 (1 April 2007). https://doi.org/10.1117/1.2750653
Published: 1 April 2007
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Camera shutters

Signal attenuation

Microelectromechanical systems

Receivers

Silicon

Variable optical attenuators

Attenuators

Back to Top