Diamond single crystals: the ultimate monochromator material for high-power x-ray beams

Andreas K. Freund

doi:10.1117/12.195195

1 February 1995 Diamond single crystals: the ultimate monochromator material for high-power x-ray beams

Andreas K. Freund

Author Affiliations +

Optical Engineering, Vol. 34, Issue 2, (February 1995). https://doi.org/10.1117/12.195195

Abstract

A review of the performance of diamond single crystals as a high heat load optical component for synchrotron x rays is given. It has been proven experimentally that the bandpass and the angular divergence of the monochromatic beam provided by a relatively thin diamond crystal used in an undulator beam are not degraded by thermal effects for a total power up to 280 W (8.7 W absorbed) at a heat flux up to 3.5 kW/mm² (109 W/mm² absorbed). These high heat load tests and model calculations have shown that edge-cooled diamond crystals at room temperature provide an easy and widely satisfactory solution to the heat load problems generated by undulator beams that are currently foreseen at the third-generation storage rings of the European Synchrotron Radiation Facility, the Advanced Photon Source, and the SPring-8 facilities. For this cooling geometry, diamond single crystals offer the additional advantage that beam multiplexing can be used. Currently available synthetic diamond crystals are sufficiently big for undulator beams and their crystalline perfection is adequate. Most of the crystals actually in use were prepared with their big surfaces (about 30 mm² in size) oriented parallel to the (100) netplanes, but more recently bigger samples whose surfaces are parallel to the (111) lattice planes were obtained. Thus, diamond single crystals are superior to all other monochromator materials for undulators and for cases where a loss of a factor of 2 in flux combined with a similar gain in resolution (as compared to silicon) are compatible with the experiments.

Citation Download Citation

Andreas K. Freund "Diamond single crystals: the ultimate monochromator material for high-power x-ray beams," Optical Engineering 34(2), (1 February 1995). https://doi.org/10.1117/12.195195

Published: 1 February 1995

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE