1 December 1998 Novel V-groove-based interconnect technology
R. K. Selli, Sidney Berglund
Author Affiliations +
A novel fiber optic interconnect technology based on injection molded V-grooves that uses the fiber’s inherent precision to provide a reliable, robust and consistent optical connection is described. This technology has been expanded and applied to optical transceivers that can now achieve the same port density as that of current copper-based systems. Both the interconnect and the optical transceivers are shown to have performance levels similar to current ferrule-based multimode technology. Testing was performed in an effort to accurately measure performance and qualify the connector design for field use. Test results for the interconnect met the performance requirements of Electronics Industry Association/Telecommunications Industry Association (EIA/TIA) 568, which represent test standards for local area networks. Results of insertion loss and return loss performance of the duplex ferrule-less connector design were measured when 400 unique links were tested using 62.5 mm multimode fiber. Mating durability performance tests were performed in which plugs were reconnected to the socket 500 times. A new generation of small form factor transceivers is discussed that were developed using the same V-groove technology. Optomechanical tests are reported that show the performance level of these new transceivers is comparable to existing ST transceiver technology.
R. K. Selli and Sidney Berglund "Novel V-groove-based interconnect technology," Optical Engineering 37(12), (1 December 1998). https://doi.org/10.1117/1.602009
Published: 1 December 1998
Lens.org Logo
CITATIONS
Cited by 19 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Connectors

Transceivers

Glasses

Multimode fibers

Optical engineering

Polishing

Tolerancing

RELATED CONTENT

IEEE 802.3 Fiber Optic Inter-Repeater Link
Proceedings of SPIE (January 01 1987)
A User's Guide To Plastic Optics
Proceedings of SPIE (December 09 1983)
Ultra-Low-Loss Multimode SMA Connector
Proceedings of SPIE (January 14 1987)
Fibre Optic Inserts For DIN 41612 PCB Connectors
Proceedings of SPIE (October 06 1986)
Improvements In ST Compatible Technology
Proceedings of SPIE (February 04 1988)

Back to Top