Application of optical CD metrology for alternative lithography

Masafumi Asano; Akiko Kawamoto; Kazuto Matsuki; Stephane Godny; Tingsheng Lin; Koichi Wakamoto

doi:10.1117/12.2010887

10 April 2013 Application of optical CD metrology for alternative lithography

Masafumi Asano, Akiko Kawamoto, Kazuto Matsuki, Stephane Godny , Tingsheng Lin, Koichi Wakamoto

Proceedings Volume 8681, Metrology, Inspection, and Process Control for Microlithography XXVII; 86812C (2013) https://doi.org/10.1117/12.2010887
Event: SPIE Advanced Lithography, 2013, San Jose, California, United States

Abstract

Directed self-assembly (DSA) and nanoimprint lithography (NIL) have been widely developed for low-cost nanoscale patterning. Although they are currently regarded as "alternative lithography," some papers show their potential to be candidates for next-generation lithography (NGL). To actualize the potential, the contribution of metrology engineers is necessary. Since the characteristics of the lithography techniques are different from those of conventional lithography, new metrology schemes correlated with each characteristic are required. In DSA of block copolymer (BCP), a guide is needed to control the direction and position of BCP. Therefore, it is necessary to monitor the relationship between the guide and the BCP pattern. Since the depth of guide or the coating thickness variation of BCP over guide influences the behavior of phase separation of BCP, 3D metrology becomes increasingly important. In NIL, residual resist thickness (RLT) underneath the pattern should be measured because its variation affects the CD variation of transferred pattern. 3D metrology is also important in NIL. Optical critical dimension (OCD) metrology will be a powerful tool for 3D metrology. In this work, some applications of OCD for alternative lithography have been studied. For DSA, we have tried to simultaneously monitor the guide and BCP pattern in a DSA-based contact hole shrinking process. Sufficient measurement accuracy for CD and shapes for guide and BCP patterns was achievable. For NIL, sufficient sensitivity to RLT measurement was obtained.

Citation Download Citation

Masafumi Asano, Akiko Kawamoto, Kazuto Matsuki, Stephane Godny , Tingsheng Lin, and Koichi Wakamoto "Application of optical CD metrology for alternative lithography", Proc. SPIE 8681, Metrology, Inspection, and Process Control for Microlithography XXVII, 86812C (10 April 2013); https://doi.org/10.1117/12.2010887

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available