The Keck Planet Finder (KPF) is a fiber-fed, high-resolution, echelle spectrometer that specializes in the discovery and characterization of exoplanets using Doppler spectroscopy. In designing KPF, the guiding principles were high throughput to promote survey speed and access to faint targets, and high stability to keep uncalibrated systematic Doppler measurement errors below 30 cm s−1. KPF achieves optical illumination stability with a tip-tilt injection system, octagonal cross-section optical fibers, a double scrambler, and active fiber agitation. The optical bench and optics with integral mounts are made of Zerodur to provide thermo-mechanical stability. The spectrometer includes a slicer to reformat the optical input, green and red channels (445–600 nm and 600–870 nm), and achieves a resolving power of ∼97,000. Additional subsystems include a separate, medium-resolution UV spectrometer (383–402 nm) to record the Ca II H & K lines, an exposure meter for real-time flux monitoring, a solar feed for sunlight injection, and a calibration system with a laser frequency comb and etalon for wavelength calibration. KPF was installed and commissioned at the W. M. Keck Observatory in late 2022 and early 2023 and is now in regular use for scientific observations. This paper presents an overview of the as-built KPF instrument and its subsystems, design considerations, and initial on-sky performance.
The Keck Planet Finder (KPF) is a fiber-fed, high-resolution, high-stability spectrometer in development at the UC Berkeley Space Sciences Laboratory for the W.M. Keck Observatory. KPF is designed to characterize exoplanets via Doppler spectroscopy with a goal of a single measurement precision of 0.3 m s-1 or better, however its resolution and stability will enable a wide variety of astrophysical pursuits. Here we provide post-preliminary design review design updates for several subsystems, including: the main spectrometer, the fabrication of the Zerodur optical bench; the data reduction pipeline; fiber agitator; fiber cable design; fiber scrambler; VPH testing results and the exposure meter.
A near-infrared, high order pyramid wavefront sensor will be implemented on the Keck telescope, with the aim of providing high resolution adaptive optics correction for the study of exoplanets around M-type stars and planet formation in obscured star forming regions. The pyramid wavefront sensor is designed to support adaptive optics correction of the light to an imaging vortex coronagraph and to a fiber injection unit that will feed a spectrograph. We present the opto-mechanical design of the near-infrared pyramid wavefront sensor, the optical performance, and the alignment strategy. The challenges of designing the assembly, as well as a fiber injection unit, to fit into the limited available space on the Keck adaptive optics bench, will also be discussed.
The new deployable tertiary mirror for the Keck I telescope (K1DM3) at the W. M. Keck Observatory has been assembled, tested and shipped to the telescope site, and is currently being installed. The mirror is capable of reflecting the beam to one of six positions around the telescope elevation ring or to retract out of the way to allow the use of Cassegrain instruments. This new functionality is intended to allow rapid instrument changes for transient event observations and improve telescope operations. This paper presents the final as-built design. Additionally, this paper presents detailed information about our alignment approach in the attempt to duplicate the instrument pointing orientation of the existing M3.
The Keck Planet Finder (KPF) is a fiber-fed, high-resolution, high-stability spectrometer in development for the W.M. Keck Observatory. The instrument recently passed its preliminary design review and is currently in the detailed design phase. KPF is designed to characterize exoplanets using Doppler spectroscopy with a single measurement precision of 0.5 m s−1 or better; however, its resolution and stability will enable a wide variety of other astrophysical pursuits. KPF will have a 200 mm collimated beam diameter and a resolving power greater than 80,000. The design includes a green channel (445 nm to 600 nm) and red channel (600 nm to 870 nm). A novel design aspect of KPF is the use of a Zerodur optical bench, and Zerodur optics with integral mounts, to provide stability against thermal expansion and contraction effects.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.