The Sloan Digital Sky Survey V (SDSS-V) Local Volume Mapper (LVM) is an ultra-wide field high spatial resolution IFU survey of the Milky Way, the Magellanic Clouds, and a sample of galaxies in the local volume. Observations are carried out with the LVM Instrument (LVM-I), a specially designed robotic telescope, instrument, and facility located at Las Campanas Observatory (LCO) in Chile. The LVM-I is hosted in a custom-built roll-off type enclosure that protects the hardware, allows for simultaneous observations towards different directions in the sky by the four LVM-I telescopes, provides a thermally controlled stable and clean environment for the LVM-I spectrographs, supplies all necessary utilities (e.g. power, communications, LN2 detector cooling) to the different LVM-I sub-systems, provides environmental telemetry and information, and integrates with the LVM-I control software to operate in an automated fashion. In this paper we discuss the design of the LVM-I enclosure, its construction, and an evaluation of its performance. The LVM-I was successfully integrated on-site and commissioned during the first half of 2023, with the enclosure design and performance meeting its requirements and allowing for the start of the SDSS-V LVM project science operations.
We report on the status of Henrietta, a new near-infrared low-resolution (R ∼ 200) spectrograph for the 1-meter Swope telescope at Las Campanas Observatory in Chile. Henrietta is uniquely designed to perform transmission spectroscopy of tens of exoplanet atmospheres per year across a wide bandpass and routinely reach the photon noise limit on a nightly basis. Henrietta is currently at Carnegie Observatories, where it is undergoing assembly and optical alignment, as well as spectrophotometric testing to identify Henrietta’s spectrophotometric noise floor. Upon finishing assembly and testing in Summer 2024, Henrietta will be shipped to Las Campanas Observatory where it will begin commissioning. In this talk, I will describe Henrietta’s science mission, its overall design, the results of current testing, its goals for commissioning and future opportunities for collaboration.
We present an update to the 2024 Magellan Infrared Multi-Object Spectrograph (MIRMOS). MIRMOS is a wide-field (13′ × 3′) near-infrared (0.89-2.4 μm) spectrograph with either a multiobject or integral-field mode. MIRMOS is designed to perform either faint-object distant-object spectroscopy, or high-signal-to-noise transmission spectroscopy of exoplanet atmosphere. MIRMOS is designed to deliver a spectral resolution of > 3, 400, delivering the Y, J, H, and K bands over four Hawaii H2RG detectors. The slit robot allows the observer to create 92 slits or a 26′′ ×20′′ integral-field unit can be swapped in. In this proceeding, we describe changes since the last SPIE conference.
The Magellan InfraRed Multi-Object Spectrograph (MIRMOS) is a planned next generation multi-object and integral field spectrograph for the 6.5m Magellan telescopes at Las Campanas Observatory in Chile. MIRMOS will perform R∼3700 spectroscopy over a simultaneous wavelength range of 0.886 - 2.404μm (Y,J,H,K bands) in addition to imaging over the range of 0.7 - 0.886μm. The integral field mode of operation for MIRMOS will be achieved via an image slicer style integral field unit (IFU) located on a linear stage to facilitate movement into the beam during use or storage while operating in multi-object mode. The IFU will provide a ∼ 20′′×26′′ field of view (FoV) made up of 0.84′′ ×26′′ slices. This will be the largest FoV IFS operating at these wavelengths from either the ground or space, making MIRMOS an ideal instrument for a wide range of science cases including studying the high redshift circumgalactic medium and emission line tracers from ionized and molecular gas in nearby galaxies. In order to achieve the desired image quality and FoV while matching the focal ratio to the multi-object mode, our slicer design makes use of novel freeform surfaces for the pupil mirrors, which require the use of high precision multi-axis diamond milling to manufacture. We present here the optical design and predicted performance of the MIRMOS IFU along with a conceptual design for the opto-mechanical system.
We describe the Sloan Digital Sky Survey Local Volume Mapper Instrument (LVM-I) construction, testing, and initial performance. The facility is designed to produce the first integral map of thousands of degrees of the Southern sky. The map will cover spectra from bluer than [O II] to 980 nm with a dispersion of over R = Δλ/λ > 4, 000 at Hα wavelength. Each spaxel will have a pitch of ∼35′′, and the survey will be conducted using four integral field units (IFUs) with an instantaneous field of view of 530 arcmin2. The LVM facility is designed to achieve the required sub-Rayleigh spectroscopy over large sky areas with outstanding spectrophotometric accuracy and precision. LVM-I is designed to produce this unique dataset using four siderostats on commercial mounts. The four beams are fed into 16-cm-diameter f/11.4 apochromatic objectives, and the sky is derotated with K mirrors. These telescopes produce an image of the field onto both guider cameras and a lenslet array. The array reimages the field at f/3.7 onto 107-micron-diameter fibers. Blue throughput is maximized with a short 18.5-m fiber run from the IFUs to the spectrographs. The fibers are reconfigured inside a splicing box to distribute the fibers from the four telescopes to three spectrographs. The spectrographs are near-copies of the Dark Energy Survey three-band f/1.7 spectrographs, which deliver sharp images over the entire chromatic range. Nine STA charge-coupled devices (CCDs), cooled with liquid-nitrogen dewars, are used for the survey. The LVM-I is controlled with custom Python software and distributed over various computers using power-over-ethernet networking. The system is housed in a custom enclosure with a roll-off roof to grant access to the sky. The enclosure allows all four telescopes to point all over the sky and measure the transmissivity of the atmosphere and the sky background. Some of the first-light data products are highlighted here.
We present the design of Henrietta, is a wide-band (0.6 - 2.4 µm) low resolution spectrograph located at the 1-m Swope Telescope in Las Campanas Observatory. Henrietta is designed to routinely suppress instrumental variations in spectrophotometric flux in order to reach the photon noise limit. The primary way Henrietta achieves this is by employing a wide-slit at the telescope focal plane to mitigate time-dependent slit losses; employing a diffusing optical element to broaden the shape of the PSF and mitigate flux variations due to the intra-pixel quantum efficiency variations; a wide field-of-view for access to reference stars with similar brightness and spectral type; and minimizing the number of optical elements to keep throughput high across a wide spectral range. Henrietta is currently in the integration and testing phase and will begin science operations in early 2023.
The Magellan Infrared Multi-object Spectrograph (MIRMOS) is a near-infrared (NIR) spectrograph with both multi-object (MOS) and integral field unit (IFU) capabilities designed for the Magellan 6.5-meter telescopes. MIRMOS’s design is optimized for both faint-object spectroscopy, and with the insertion of a diffuser, for ultra-high-signal-to-noise transmission spectroscopy of exoplanet atmospheres. To maximize MIRMOS’s scientific returns, it has an instantaneous wavelength range from 0.89-2.4 µm with a spectral resolution >3, 400 in the Y, J, H, and K bands. The front end switches between a mechanical slit mask robot capable of deploying 92 slits over a 13′ × 3 ′ field, and an image slicer IFU with a wide field of 26′′ × 20′′. In this proceeding, we will describe the current state of the instrument, with a focus on its optical design.
We describe the on-sky performance of the robotic Focal Plane System (FPS) units that replace the fiber plug-plate systems at the Sloan and duPont telescopes for the SDSS-V survey. The first FPS was arrived at Apache Point in December 2021, and the second unit will be delivered to Las Campanas in spring 2022. Each FPS carries 500 zonal fiber positioners carrying three fibers: two science fibers for the BOSS and APOGEE spectrographs and a back-illuminated metrology fiber. The FPS enables the SDSS-V Milky Way and Black Hole Mapper surveys that will begin survey operations in 2022.
The Sloan Digital Sky Survey V (SDSS-V) is an all-sky spectroscopic survey of < 6 million objects, designed to decode the history of the Milky Way, reveal the inner workings of stars, investigate the origin of solar systems, and track the growth of supermassive black holes across the Universe. Collaboratively, organizations across both academia and industry have partnered to overcome technical challenges and execute operational directives associated with commissioning the various mechanical, electrical, and software subsystems of SDSS-V. While this type of collaboration is not unique, the scale and complexity of next generation astronomical instruments is an emerging challenge that requires industrial systems and process engineering practices at a quasi-industrial scale. Driven by the success of multiplexed spectroscopic surveys, instrumentation is evolving to include systems with hundreds to thousands of components and sub-assemblies procured or produced from various sources. This trend requires the adoption of new and existing processes and best practices in the design, integration, and test of next generation astronomical instruments. The following discussion outlines those industrial systems and process engineering processes, methods, and practices, currently in the operational phase, for the design, integration, and test of the SDSS-V Focal Plane System (FPS). An emphasis is placed on processes, methods, and practices related to coordination of multiple contract manufacturing vendors and operational execution of small batch manufacturing.
The Sloan Digital Sky Survey V (SDSS-V) is an all-sky spectroscopic survey of <6 million objects, designed to decode the history of the Milky Way, reveal the inner workings of stars, investigate the origin of solar systems, and track the growth of supermassive black holes across the Universe. This paper describes the design and construction of two robotic Focal Plane System (FPS) units that will replace the traditional SDSS fiber plug-plate systems at the Sloan and du Pont telescopes for SDSS-V. Each FPS deploys 500 zonal fiber positioners that allow us to reconfigure the fibers onto a new target field within 2-3 minutes of acquisition. Each positioner carries three fibers: two science fibers that feed the BOSS and APOGEE spectrographs and a third back-illuminated metrology fiber is used in conjunction with a telescopemounted Fiber Viewing Camera (FVC) to measure the absolute positions of the fiber heads. The 300 APOGEE fibers are distributed among the 500 positioners to maximize common field coverage. A set of fiber-illuminated fiducials distributed in and around the positioner array establish a fixed reference frame for the FVC system. Finally, six CCD cameras mounted around the periphery of the focal plane provide acquisition, guiding, and focus monitoring functions. The FPS is a key enabling technology of the SDSS-V Milky Way and Black Hole Mapper surveys.
The Sloan Digital Sky Survey V (SDSS-V) is an all-sky spectroscopic survey of ≥ 6 million objects, designed to decode the history of the Milky Way, reveal the inner workings of stars, investigate the origin of solar systems, and track the growth of supermassive black holes across the Universe.1 The robotic Focal Plane System (FPS)2 will carry 500 robots each with three fibers for science and metrology. The science fibers feed the BOSS3 and APOGEE4 spectrographs, while the metrology fibers are back illuminated to aid in robot positioning. Blind initial x/y positional precision of the robots is expected to be better than 50µm. The robots must position the fibers to better than 5µm in order to meet the science requirements. The FPS fiber viewing camera (FVC) consists of optomechanical components that look back through the telescope optics at light from back-lit fiducial and metrology fibers to measure the positions of the robots in the telescope focal plane. The FVC takes an image of the robots in the telescope focal plane, measures their positions to an accuracy of better than 3µm, and then feeds back error commands to the robot control system to meet the 5µm positional requirement. This paper details the optomechanical design, and initial results of an engineering run on the du Pont telescope.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.