Since the conception of the Generalized Gaussian Constants, and its foundation the Gaussian Bracket, is
a powerful tool in analyzing complex optical systems, though up until now it has seen use almost exclusive in
designing zoom lens systems. This study investigates the correspondence of Generalized Gaussian Constants to
optical system properties, and demonstrates a design method in particular for the reflective projection system
in EUV lithography. The detailed four-mirror design is a proof of concept of the design method, and a more
complex eight-mirror design demonstrates the capacity for higher design complexity.
We experimentally investigate the multifold intensity enhancement and spectral narrowing of photoluminescence (PL) from amorphous silicon quantum dots (a-Si QDs) embedded in a silicon-rich SiOx film of the Ag/SiOx:a-Si QDs/Au plasmonic nanocavity, through the resonance coupling between the localized surface plasmon (LSP) mode and the Fabry-Pérot (FP) cavity mode, by tuning a one-dimensional (1-D) Ag grating on the top. The LSP resonance can be precisely tuned by adjusting the Ag line widths of the 1-D Ag grating. It is found that the LSP mode strongly couples with the FP cavity mode, resulting in a narrower emission line width and a larger PL enhancement. An optimized Ag grating structure is found to exhibit a narrow emission line width of 15 nm and 2.77-fold enhancement in the PL peak intensity, as compared to an SiOx:a-Si QDs/Au structure without 1-D Ag grating, due to the strong resonance coupling between the two modes.
Currently, maintaining image quality during conjugate change is most frequently achieved through careful lens design with the multiconfiguration optimizing method and physical shifts of the lenses within the system such that the system remains in focus. However, in applications with operational limitations, such as endoscopy where the space available cannot allow for moving parts, the lens system needs to be designed such that the system is in focus over a wide range of conjugates. A lens design method that is integrable into existing commercial lens design software is presented. This method derives and maintains an optimal condition for astigmatism and distortion to control and reduce the overall aberration variation during the conjugate change, and extends the depth of field of the system. A side-by-side lens design comparison between the method illustrated in this study and the conventional lens design method commonly employed by designers of zoom lenses is also presented and is demonstrated to produce better results in designing conjugate change optical systems.
This study demonstrates that attaching micro-lens array films (MAFs) on the substrate and reducing the substrate thickness of OLED can significantly increase the power efficiency, while simultaneously reduce image blurring. Using a point source model, based on Monte-Carlo ray-tracing method, the power efficiency enhancement and reduction of blur effect are respectively discussed in three different regions of the MAFs attached substrate: partially reflecting region, transmitting region, and light guiding region of micro-lenses. According to the equations, derived with regard to the substrate thickness and the displacement from the point source and based on geometric relations corresponding to different regions, reducing the substrate thickness will result in different levels of enhancement for power efficiency in different regions. By comparing OLED with MAFs and bare OLED, the overall enhancement ratio of power efficiency is 1.46, which can be further improved to 1.78 by reducing the substrate thickness from 700 μm to 50 μm, and the blurlength is reduced from 942 μm to 255 μm. The simulation results demonstrate the possibility of applying MAFs to OLED for higher power efficiency without image degradation in display and lighting applications.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.