The aim of this document is to highlight key design techniques and considerations to adopt when designing a readout integrated circuit (ROIC) for InGaAs image sensors. An overall design approach is proposed while considering the conflicting issues inherent to the design requirement tradeoffs. The article covers both system level design and circuit design up until fabrication on silicon and measurement in the Lab.
This paper presents a design methodology for a GmC filter in a Continuous-Time (CT) Sigma-Delta A/D converter. It focuses on the challenges the designer faces when a deep sub-micron technology is used. According to the proposed methodology, a 1-bit, 3rd order CT modulator is designed. The modulator achieves an accuracy of 10 bits within a signal band of 8 MHz. The design is made in a 90 nm standard CMOS process. The small transistor dimensions enable a clock rate of 1 GHz. An analytical comparison between RC filters and GmC filters is presented based on their power consumption. It is shown that a RC filter requires an integrator loop gain-bandwidth equal to the sampling rate. This puts a severe limitation on the minimal power consumption for this type of filter. Therefore, a GmC filter implementation is chosen because it consumes the lowest power in order to meet the design specifications. Mathematical expressions for harmonic distortion and thermal noise are derived. They are interpreted in terms of a low power design approach. Since the input signal swing scales down with the supply voltage, harmonic distortion becomes less important in a deep sub-micron technology. Therefore, the thermal noise requirements determine mainly the overall power consumption of the CT modulator. Small transistor lengths enable high sampling rates, but lower the integrator
output impedance. This results in a reduced DC gain of the filter. Consequently, the proposed GmC filter architecture is adjusted to provide sufficient suppression of in-band quantization noise leakage. All proposed design choices are verified by numerical simulations.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.