PLATO (PLAnetary Transits and Oscillations of stars)1 is the M3 class ESA mission dedicated to the discovery
and study of extrasolar planetary systems by means of planetary transits detection. PLATO Payload Camera
units are integrated and vibrated at CSL before being TVAC tested for thermal acceptance and performance
verification at 3 different test facilities (SRON, IAS and INTA). 15 of the 26 Flight Cameras were integrated,
tested and delivered to ESA for integration by the Prime between June 2023 and June 2024, with the remaining
flight units to be tested by the end of 2024. In this paper, we provide an overview of our serial testing approach,
some of the associated challenges, key performance results and an up-to-date status on the remaining planned
activities.
The PLAnetary Transits and Oscillations of stars mission (PLATO) is the M3 mission in ESA’s Cosmic Vision 2015-2025 Programme, see Rauer et al. (2014).1 The PLATO mission aims at detecting and characterizing extrasolar planetary systems, including terrestrial exoplanets around bright solar-type stars up to the habitable zone. To be able to perform the required high precision photometric monitoring of the large target stars sample, PLATO is based on a multi-telescope configuration consisting of 26 Cameras, so as to provide simultaneously a large field of view and a large collecting aperture. The optical design is identical for all cameras and consists of a 6-lens dioptric design with a 120 mm entrance pupil and an effective field of view of more than 1000 square degrees. As for every optical system, especially dioptric ones, the presence of optical ghosts can dramatically affect the scientific observations. Thanks to the application of an excellent anti-reflection coating, PLATO’s cameras are by design very insensitive to ghosts. However, the residual faint back reflections focused on the detectors have to be simulated and considered during science operation (target selection) and in data correction algorithms. This article describes the different optical analyses performed to estimate the importance of ghosts in PLATO’s cameras, as well as the simulations performed to support the preparation of the test campaign on the first PLATO camera: the engineering model. Finally, the test execution, data analysis and results are presented and compared to the simulated data.
PLATO (PLAnetary Transits and Oscillations of stars) is a European Space Agency medium class mission, whose launch is foreseen for 2026. Its primary goal is to discover and characterise terrestrial exoplanets orbiting the habitable zone of their host stars. This goal will be reached with a set of 26 wide field-of-view cameras mounted on a common optical bench. Here we show some results of the first cryogenic vacuum test campaign made on the Engineering Model (EM) of one PLATO camera, performed at the Netherlands Institute for Space Research (SRON). In particular we present the search for the best focus temperature, which was done first by using a Hartmann mask, and then by maximizing the ensquared energy fractions of the point spread functions (PSFs) on the entire field of view taken at different temperature plateaus. Furthermore we present the PSF properties of the EM at the nominal focus temperature over all the field of view, focusing on the ensquared energy fractions. The Engineering Model camera was successfully integrated and validated under cryo-vacuum tests, allowing the mission to pass ESA’s Critical Milestone, and confirming the mission is on track for launch in 2026.
PLATO is an exoplanet hunting mission of the European Space Agency. It is a medium-class mission, with a launch foreseen in 2026. Its prime objective is to uncover Earth-sized planets residing in their habitable zone. The payload consists in 26 cameras with a very wide field of view. These cameras consist in a Telescope Optical Unit, aligned at ambient and characterised at the operational temperature, and a Focal Plane Array bearing the detectors, and delivered after coupling with the Front End Electronics. In this contribution, we report on the alignment of the Engineering Model camera of Plato, i.e., the input metrology, the mechanical alignment of the optical unit with the focal plane array, the test environment and the optical characterisation throughout the process until the integrity check after delivery to the cryo-vacuum testing facility where the camera underwent a thorough performance demonstration. We also give a detailed description of the bolting process and the associated error budget.
PLATO is an ESA mission to hunt for Earth-sized exoplanets in the habitable zone of their host star. The heart of the payload consists of 26 wide-field cameras. We develop a Common Electrical Ground Support Equipment (EGSE) framework for the testing and verification of these cameras. The focal planes are aligned to the telescope optics at ambient temperature and the performance verification is done at operational temperature in thermal-vacuum conditions in different facilities. The Common-EGSE system will guarantee that tests are executed via the same procedures and are analyzed identically, by providing a software framework that can be tuned for site-specific hardware and avoids duplicate developments. The Common EGSE provides commanding for the camera and the Ground Support Equipment (GSE), telemetry monitoring, logging, data storage, and data analysis. In addition, the design allows for sharing commanding and analysis scripts. We present the design of the system and the generic commanding scheme for test setup hardware.
PLATO is an exoplanet hunting mission from the European Space Agency. It is a medium-class mission, with a launch foreseen in 2026. Its prime objective is to uncover Earth-sized planets residing in the habitable zone of their host star. The payload consists of 26 cameras with a very wide field-of-view. While the operational temperature of the cameras will be -80°C, the focal plane of each camera will be integrated with its telescope assembly (bearing the optics) at room temperature. The degradation of the optical quality at ambient, combined with the detector dark current and with the very high accuracy required from the alignment process bring a number of interesting challenges. In the present article, we review the alignment concept, present optical simulations of the measurements at ambient along with their analysis, and present an error budget for the optical measurements. The derivation of this error budget is easily applicable to all optical measurements to be performed during the alignment, i.e. the definition of the best image plane at the operational temperature and the optical alignment itself, at room temperature.
PLATO (PLAnetary Transits and Oscillation of stars) is a medium-class space mission part of the ESA Cosmic vision program. Its goal is to find and study extrasolar planetary systems, emphasizing on planets located in habitable zone around solar-like stars. PLATO is equipped with 26 cameras, operating between 500 and 1000nm. The alignment of the focal plane assembly (FPA) with the optical assembly is a time consuming process, to be performed for each of the 26 cameras. An automatized method has been developed to fasten this process. The principle of the alignment is to illuminate the camera with a collimated beam and to vary the position of the FPA to search for the position which minimizes the RMS spot diameter. To reduce the total number of measurements which is performed, the alignment method is done by iteratively searching for the best focus, decreasing at each step the error on the estimated best focus by a factor 2. Because the spot size at focus is similar to the pixel, it would not be possible with this process alone to reach an alignment accuracy of less than several tens of microns. Dithering, achieved by in-plane translation of the focal plane and image recombination, is thus used to increase the sampling of the spot and decrease the error on the merit function.
We present the first results of a study aimed at finding new and efficient ways to automatically process spacecraft telemetry for automatic health monitoring. The goal is to reduce the load on the flight control team while extending the "checkability" to the entire telemetry database, and provide efficient, robust and more accurate detection of anomalies in near real time. We present a set of effective methods to (a) detect outliers in the telemetry or in its statistical properties, (b) uncover and visualise special properties of the telemetry and (c) detect new behavior. Our results are structured around two main families of solutions. For parameters visiting a restricted set of signal values, i.e. all status parameters and about one third of all the others, we focus on a transition analysis, exploiting properties of Poincare plots. For parameters with an arbitrarily high number of possible signal values, we describe the statistical properties of the signal via its Kernel Density Estimate. We demonstrate that this allows for a generic and dynamic approach of the soft-limit definition. Thanks to a much more accurate description of the signal and of its time evolution, we are more sensitive and more responsive to outliers than the traditional checks against hard limits. Our methods were validated on two years of Venus Express telemetry. They are generic for assisting in health monitoring of any complex system with large amounts of diagnostic sensor data. Not only spacecraft systems but also present-day astronomical observatories can benefit from them.
The short wavelength spectrometer (SWS) is one of the four instruments on-board of ESA's IR SPace Observatory (ISO), launched on 15 November 1995. It covers the wavelength range of 2.38-45.2 microns with a spectral resolution ranging from 1000-2000. By inserting Fabry-Perot filters the resolution can be enhanced by a factor 20 for the wavelength range from 11.4-44.5 microns. After the successful launch the instrument was tested and calibrated during a period of spacecraft checkout and performance verification. The opto- mechanical construction of the instrument appears to behave extremely well. The instrument performance is on all aspects as expected, except for the detector sensitivity where the noise is dominated by effects of particle radiation. We given here an overview of the in-orbit performance, discuss the calibration and present some result from trend analysis of the most important instrument and detector parameters.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.