Thin-Film Lithium Niobate (TFLN) is a promising platform for optical communications, microwave photonics, and quantum technologies. Compared with conventional bulk materials, the TFLN platform has received widespread attention for its ability to achieve compact and high-performance integrated photonic components. In this work, we proposed a photonic-assisted multi-format microwave signal generator based on a TFLN Mach-Zehnder Modulator (MZM). It is a system with the capacity to generate and switch between a variety of microwave waveforms that are needed for optical communication and radars. The proposed microwave photonic link features a simple architecture, including only a laser, an MZM, and a photodetector (PD). Different waveforms can be obtained by appropriately setting the driven signal and Direct Current (DC) bias of the MZM, such as Phase-Shift Keying (PSK) signal, Amplitude-Shift Keying (ASK) signal, and dual-chirp microwave signal. The proposed signal generator offers a broad operating frequency range since no optical or electrical filters are involved. In addition, no extra optical processing is required which guarantees the simplicity of the generator.
Microwave photonic systems process the electrical signal in optical domain so that the characteristics of the output optical signals include the transfer function of the signal processing link. In this paper, we review our recent works about a microwave photonic repeater, self-interference cancellation, and microwave signal coupling techniques. First, based on a photonic repeater consisting of a dual-polarized dual-parallel Mach-Zehnder modulator (DP-DPMZM) and a Polarization Controller (PC), four different down-conversion states can be performed. Two separate Local Oscillator signals (LO) also enable frequency down-conversion of microwave signals in different frequency bands. Secondly, a Dual-Parallel Dual-Drive Mach-Zehnder Modulator (DP-DDMZM) and a low-frequency LO signal source are used to achieve Self-Interference Cancellation and Harmonic Down-Conversion (SIC+HDC) for an In-Band Full-Duplex (IBFD) system. Finally, for the microwave photonic coupling technique, a Photonic Microwave Hybrid Splitter (PMHS) and a Photonic Microwave Hybrid Combiner (PMHC) are proposed, respectively. The PMHS and PMHC individually controls the amplitude and phase of the two signals by adjusting the Direct Current (DC) biases of modulators. Our proposed signal processing techniques are very promising for flexible microwave signal processing, radars, and wireless communications.
Frequency-chirped microwave waveforms have high pulse compression ratio and are widely used as radar waveforms to increase the detection range and range resolution. In radar networks, the frequency-chirped microwave waveforms generated in center office (CO) need to be transmitted to remote base stations. During fiber transmission, the dispersion of long-distance fiber may cause power fading to the radar waveforms which restricts the signal frequency, signal bandwidth and transmission distance. In this paper, we review our recent works about photonic generation and antidispersion transmission of frequency chirped microwave waveforms. First, based on polarization multiplexing Fourier mode-locked optoelectronic oscillator, frequency and bandwidth doubling chirped microwave signals are generated. By adding a laser, the system can also generate dual-chirp signals. Second, by combining the generation and transmission of dual-chirp microwave waveforms, we proposed a photonic scheme for the generation and transmission of dual-chirp microwave signals based on shifting the power fading frequency response to compensate the fiber dispersion. In order to further improve the bandwidth of dual-chirp waveforms and the anti-dispersion transmission capability, we used optical frequency doubling and carrier frequency shifting technology to achieve quadruple-bandwidth dual-chirp signal generation and transmission with the elimination of power fading. Moreover, an equivalent splitting parabolic phase modulation scheme was proposed to generate background-free dual-chirp microwave waveforms, which is independent of the direct current bias points of the modulator and the polarization states of the system. The system can eliminate the power fading induced by fiber dispersion in principle, which has good application prospects in radar networks.
With the improvement of information transmission rate and the progress of semiconductor process technology, Lithium Niobite on insulator (LNOI) electro-optic modulators have received more and more attention. The LNOI modulators have high linearity and extinction ratio that silicon-based modulators do not reach, so it can be used to support high-speed and long-distance optical communication. In the LNOI modulator, the traveling wave electrodes with coplanar waveguides (CPWs) structure are used. We mainly consider the impedance matching of microwave transmission, the velocity and loss of microwave and optical wave to obtain high-speed modulation devices. By means of Simulation, we get the optical waveguide single-mode condition and analyze the characteristic impedance, microwave effective refractive index and 3dB bandwidth of the electrode under that condition. The electrode with bandwidth of 70GHz and 𝑆11 about -25dB is obtained.
We propose and demonstrate a photonic approach to generate and transmit a quadrupling-bandwidth dual-chirp microwave waveform with anti-dispersion transmission. Commonly, dual-chirp microwave waveforms are generated by double-sideband modulation, which brings severe chromatic-dispersion-induced power fading (CDIP) over fiber transmission. In this scheme, we perform optical carrier suppression via a polarization controller based on an integrated polarization-division multiplexing Mach–Zehnder modulator (PDM-MZM) to eliminate the CDIP. Moreover, by properly adjusting two bias voltages of PDM-MZM, we find that the bandwidth of the generated dual-chirp microwave signal is quadrupled. It is worth mentioning that we just need to operate in the central office to realize the above-mentioned functions and no optical filters are needed, which significantly improves the limitation of the devices. The method is analyzed theoretically and proved experimentally, which is of great significance for improving range-Doppler resolution and the detection capability of radars for one-to-multi base stations over fiber transmission.
We propose a photonic approach to generate triangular waveforms based on nonlinear polarization rotation (NPR) effect in a highly nonlinear fiber. A continuous wave probe light is polarization rotated by an intensity-modulated control light through the NPR effect. By tuning the cascaded polarization controller, the undesired second-order harmonic is well suppressed after photodetection. A 90-deg hybrid coupler is used to compensate the phase mismatch between the fundamental and third-order harmonic components, so that triangular waveforms are generated successfully. The proposed approach is theoretically analyzed and experimentally verified. Triangular waveforms at repetition rates of 3, 4, and 5 GHz with full-duty cycle are experimentally generated.
In modern radar system, pulse compression technique has been widely used to increase the detection distance and range resolution. To enlarge the pulse compression ratio, the microwave signals are often phase modulated, such as phase-coded or frequency chirped. Conventionally, the phase-modulated microwave signals generated by electrical methods suffer from low microwave carrier frequency, limited bandwidth, low data rate and high transmission loss. Photonic-assisted generation and transmission of phase-modulated signals is a promising candidate to overcome these limitations In this paper, we review our recent works about the photonic generation and transmission of phase-modulated microwave signals, including the simultaneously frequency up-conversion and phase-coding, background-free frequency-doubled phase-coded microwave signal generation, phase-coded microwave pulse generator by optoelectronic oscillation (OEO), as well as transmission of dual-chirped microwave signals with chromatic-dispersion-induced power fading (CDIP) compensation and elimination technology. These works represent the new progresses in photonic approaches to generate and transmit phase-modulated microwave signals, which has great potential in the modern radar system.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.