We report a distributed fiber-optic pressure sensor based on Bourdon tubes using Rayleigh backscattering metered by optical frequency-domain reflectometry (OFDR). In the proposed sensor, a piece of single-mode fiber (SMF) is attached to the concave surfaces of Bourdon tubes using a thin layer of epoxy. The strain profiles along the concave surface of the Bourdon tube vary with applied pressure, and the strain variations are transferred to the attached SMF through the epoxy layer, resulting in spectral shifts in the local Rayleigh backscattering signals. By monitoring the local spectral shifts of the OFDR system, the pressure applied to the Bourdon tube can be determined. By cascading multiple Bourdon tubes and correspondingly attaching SMF sections (i.e., a series of SMF-modified Bourdon tubes), distributed pressure measurements can be realized. Three Bourdon tubes are employed to demonstrate the proposed spatially distributed sensing scheme. The experimental results showed that linear relationships between spectral shift and pressure were obtained in all three SMF-Bourdon tubes (i.e., at three spatial locations). It is expected that the proposed sensing device, the SMF-Bourdon tube, can be used in applications where distributed/multipoint pressure measurements are needed.
Thin concrete panels reinforced with alloy polymer macro-synthetic fibers have recently been introduced to rapidly and cost-effectively improve the driving condition of existing roadways by laying down a fabric sheet on the roadways, casting a thin layer of concrete, and then cutting the layer into panels. This study is aimed to understand the strain distribution and potential crack development of concrete panels under three-point loading. To this end, six full-size 6ft×6ft×3in concrete panels were tested to failure in the laboratory. They were instrumented with three types of single-mode optical fiber sensors whose performance and ability to measure the strain distribution and detect cracks were compared. Each optical fiber sensor was spliced and calibrated, and then attached to a fabric sheet using adhesive. A thin layer of mortar (0.25 ~ 0.5 in thick) was cast on the fabric sheet. The three types of distributed sensors were bare SM-28e+ fiber, SM-28e+ fiber with a tight buffer, and concrete crack cable, respectively. The concrete crack cable consisted of one SM-28e+ optical fiber with a tight buffer, one SM-28e+ optical fiber with a loose buffer for temperature compensation, and an outside protective tight sheath. Distributed strains were collected from the three optical fiber sensors with pre-pulse-pump Brillouin optical time domain analysis in room temperature. Among the three sensors, the bare fiber was observed to be most fragile during construction and operation, but most sensitive to strain change or micro-cracks. The concrete crack cable was most rugged, but not as sensitive to micro-cracks and robust in micro-crack measurement as the bare fiber. The ruggedness and sensitivity of the fiber with a tight buffer were in between the bare fiber and the concrete crack cable. The strain distribution resulted from the three optical sensors are in good agreement, and can be applied to successfully locate cracks in the concrete panels. It was observed that the three types of fibers were functional until the concrete panels have experienced inelastic deformation, making the distributed strain sensing technology promising for real applications in pavement engineering.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.