Paper
4 April 1994 Leaky annular pupil for improved lateral resolution in confocal fluorescence microscopy
Christian K. Sieracki, Eric W. Hansen
Author Affiliations +
Proceedings Volume 2184, Three-Dimensional Microscopy: Image Acquisition and Processing; (1994) https://doi.org/10.1117/12.172085
Event: IS&T/SPIE 1994 International Symposium on Electronic Imaging: Science and Technology, 1994, San Jose, CA, United States
Abstract
Imaging properties of an optical system may be modified by the introduction of spatial filters at the entrance and exit pupils. A classic example of this is the annular pupil, which is known to improve lateral resolution at the expense of depth discrimination. In confocal fluorescence microscopy, previous studies have shown that a configuration with an annular pupil in the excitation path and ca circular pupil in the emission path offer little improvement. We show here that a more favorable situation results if the annular excitation pupil is design with a partially transmissive central obstruction. Our simulations show that the radii and leakage of the annulus may be adjusted to improve the point spread function's lateral resolution by 13 percent and with not degradation of the Z-axis full width at half-maximum. A slightly different pupil is shown to improve the lateral resolution by 10 percent and the Z-axis response by 5 percent.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Christian K. Sieracki and Eric W. Hansen "Leaky annular pupil for improved lateral resolution in confocal fluorescence microscopy", Proc. SPIE 2184, Three-Dimensional Microscopy: Image Acquisition and Processing, (4 April 1994); https://doi.org/10.1117/12.172085
Lens.org Logo
CITATIONS
Cited by 13 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Confocal microscopy

Microscopes

Luminescence

Microscopy

3D image processing

Objectives

Point spread functions

Back to Top