Paper
22 April 1996 Displacement measurements over a wide range utilizing a simple intensity-based fiber optic sensor
Frank Sienkiewicz, Arun Shukla
Author Affiliations +
Abstract
A fiber optic sensor has been developed and tested for static and dynamic strain and displacement measurements. The sensor incorporates an extremely simple design, light source, and detector. The sensor utilizes a continuous piece of multimode optical fiber 'tied' into the shape of a figure of eight which functions as an intensity based optical fiber strain or displacement sensor. It is bonded to a body at two points, one on each side of the loops in the eight. The inherent stiffness of the fiber maintains a constant shape for the sensor throughout a wide range of displacements. Since multimode fiber is used in the construction, a simple LED/PIN diode is used for the light source/detector with a basic amplification circuit for each. The experiments have shown that the sensor is simple to construct, has a linear range of approximately 20 mm extension, and responds to frequencies from the quasi-static into the kilohertz range.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Frank Sienkiewicz and Arun Shukla "Displacement measurements over a wide range utilizing a simple intensity-based fiber optic sensor", Proc. SPIE 2719, Smart Structures and Materials 1996: Smart Systems for Bridges, Structures, and Highways, (22 April 1996); https://doi.org/10.1117/12.238841
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Fiber optics sensors

Optical fibers

Resistance

Diodes

Geometrical optics

Light sources

Back to Top