DQE(f) of an amorphous-silicon flat-panel x-ray detector: detector parameter influences and measurement methodology

Paul R. Granfors; Richard Aufrichtig

doi:10.1117/12.384481

25 April 2000 DQE(f) of an amorphous-silicon flat-panel x-ray detector: detector parameter influences and measurement methodology

Paul R. Granfors, Richard Aufrichtig

Author Affiliations +

Proceedings Volume 3977, Medical Imaging 2000: Physics of Medical Imaging; (2000) https://doi.org/10.1117/12.384481
Event: Medical Imaging 2000, 2000, San Diego, CA, United States

Abstract

We discuss how the frequency dependent detective quantum efficiency [DQE(f)] in a well-designed amorphous silicon flat panel detector is affected by several phenomena that reduce the DQE in other types of medical imaging detectors. The detector examined employs a CsI(Tl) scintillator and is designed for general diagnostic x-ray imaging applications. We consider DQE degradation due to incomplete x-ray absorption, secondary quantum noise, Swank factor, Lubberts effect, spatial variation in gain, noise aliasing, and additive system noise. The influences of detector design parameters on the frequency- and exposure-dependent DQE are also examined. We find that the DQE does not depend directly on MTF and that DQE is independent of exposure within the detector's operating range, except at the lowest exposures. Likewise the signal per absorbed x-ray, which contains the fill factor as one of several multiplicative components, does not affect DQE except at the lowest exposures. A methodology for determining DQE(f) from measurements of MTF(f), noise power spectrum (NPS), average signal, and x-ray exposure is presented. We find that it is important to incorporate several corrections in the NPS measurement procedure in order to obtain accurate results. These include corrections for lag, non-linearity, response variation from pixel to pixel, and use of a finite number of flat-field images. MTF, NPS, and DQE results are presented for a 41 X 41-cm² flat panel detector designed for radiographic applications.

Citation Download Citation

Paul R. Granfors and Richard Aufrichtig "DQE(f) of an amorphous-silicon flat-panel x-ray detector: detector parameter influences and measurement methodology", Proc. SPIE 3977, Medical Imaging 2000: Physics of Medical Imaging, (25 April 2000); https://doi.org/10.1117/12.384481

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available