Paper
10 May 2005 Monitoring system of effective exposure dose and focus
Sachiko Yabe, Akiyuki Minami, Takashi Nasuno, Yoshihisa Matsubara, Koichiro Tsujita
Author Affiliations +
Abstract
We developed a process monitoring system that calculates the effective dose and focus of device wafers using an overlay metrology tool. The effective dose is monitored by measuring the overall width of the fine line-and-space (LS) patterns, the duty ratio of which gradually changes. The effective focus is monitored by measuring the line-end-shortening of the printed line patterns. We used newly designed focus-monitor marks along with conventional LS marks for line-end-shortening. The new marks, which can be measured as an overlay, showed better reproducibility than conventional marks. We calculated the focus shifts caused by variations in the layer structure of device wafers by measuring shots that had been intentionally defocused. Using the defocused shots, we were able to improve the accuracy of our focus-shift calculations. The focus monitor displayed various properties depending on the measurement methods, the design of the marks, and device-layer conditions. Therefore, the mark design must be optimized to each device layer. We demonstrated the accuracy of this monitoring system by applying it to the various layers in a 65-nm-node Cu/low-k interconnect process.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sachiko Yabe, Akiyuki Minami, Takashi Nasuno, Yoshihisa Matsubara, and Koichiro Tsujita "Monitoring system of effective exposure dose and focus", Proc. SPIE 5752, Metrology, Inspection, and Process Control for Microlithography XIX, (10 May 2005); https://doi.org/10.1117/12.598598
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Metals

Semiconducting wafers

Overlay metrology

Critical dimension metrology

Metrology

Reflectivity

Control systems

Back to Top