Volume Table of Contents

PROCEEDINGS VOLUME 8916

SIXTH INTERNATIONAL SYMPOSIUM ON PRECISION MECHANICAL MEASUREMENTS | 8-12 AUGUST 2013

Sixth International Symposium on Precision Mechanical Measurements

Editor(s): Shenghua Ye, Yetai Fei

Editor Affiliations +

IN THIS VOLUME

2 Sessions, 151 Papers, 0 Presentations

Front Matter: Volume 8916 (1)

Sixth International Symposium on Precision Mechanical Measurements (150)

SIXTH INTERNATIONAL SYMPOSIUM ON PRECISION MECHANICAL MEASUREMENTS

8-12 August 2013

Guiyang, China

View the SPIE Conference + Exhibitions Calendar

Subscribe to Digital Library

VIEW ALL ABSTRACTS +

Front Matter: Volume 8916

Front Matter: Volume 8916 Open Access

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891601 (2013) https://doi.org/10.1117/12.2041466

Read Abstract +

Sixth International Symposium on Precision Mechanical Measurements

Nondestructive optical characterization of MEMS Paper

Ryszard J. Pryputniewicz

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891602 (2013) https://doi.org/10.1117/12.2036620

Read Abstract +

Traceability of measurements at the nanoscale Paper

Harald Bosse

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891603 (2013) https://doi.org/10.1117/12.2035957

Read Abstract +

Adaptive fractional differential method based on CSGV to extract image texture feature Paper

Aiguo Song, Wei Wang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891604 (2013) https://doi.org/10.1117/12.2035859

Read Abstract +

Development of transmission error tester for face gears Paper

Zhao-yao Shi, Xiao-ning Lu, Chang-he Chen, Jia-chun Lin

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891605 (2013) https://doi.org/10.1117/12.2036418

Read Abstract +

Computational metrology for nanomanufacturing Paper

Shiyuan Liu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891606 (2013) https://doi.org/10.1117/12.2035549

Read Abstract +

An experiment of femtosecond laser absolute distance measurement by spectrally resolved interferometry Paper

Weihu Zhou, Yao Li, Rongyi Ji, Yan Xu, Deming Liu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891607 (2013) https://doi.org/10.1117/12.2035617

Read Abstract +

Dimensional measurement of micrometer-scale structures with a nanopipette ball probe by using shear-force detection Paper

S. Ito, I. Kodama, W. Gao

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891609 (2013) https://doi.org/10.1117/12.2035942

Read Abstract +

Development of a miniature multi-degree-of-freedom measurement system for ultra precision stages Paper

Hung-Yu Wang, Bo-Hsun Liao, Ming-Jun Chou, Yang-Yu Tseng, Kuang-Chao Fan

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160A (2013) https://doi.org/10.1117/12.2035495

Read Abstract +

Using acceleration measurements and neuro-fuzzy systems for monitoring and diagnosis of bearings Paper

Tien-I Liu, Junyi Lee, Palvinder Singh, George Liu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160B (2013) https://doi.org/10.1117/12.2035880

Read Abstract +

Nanometrology interferometric coordinates measurement system for local probe microscopy Paper

Jan Hrabina, Josef Lazar, Petr Klapetek, Ondrej Cip, Martin Cizek, Mojmir Sery

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160C (2013) https://doi.org/10.1117/12.2035477

Read Abstract +

Review and comparison of temporal- and spatial-phase shift speckle pattern interferometry for 3D deformation measurement Paper

Xin Xie, Lianxiang Yang, Xu Chen, Nan Xu, Yonghong Wang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160D (2013) https://doi.org/10.1117/12.2036603

Read Abstract +

High accuracy full field three dimensional (3D) deformation measurements have always been an essential problem for the manufacturing, instrument, and aerospace industry. 3D deformations, which can be translated further into 3D strain and stress, are the key parameter for design, manufacturing and quality control. Due to the fast development of the manufacturing industry, especially in the automobile and airspace industry, rapid design and optimization concepts have already widely accepted. These concepts all require the support of rapid, high sensitive and accuracy 3D deformation measurement. Advanced optical methods are gaining widely acceptance for deformation and stain measurement by industry due to the advantages of non-contact, full-field and high measurement sensitivity. Of these methods, Electronic Speckle Pattern Interferometry (ESPI) is the most sensitive and accurate method for 3D deformation measurement in micro and sub micro-level. ESPI measures deformation by evaluating the phase difference of two recorded speckle interferograms under different loading conditions. Combined with a phase shift technique, ESPI systems can measure the 3D deformation with dozens of nanometer level sensitivity. Cataloged by phase calculation methods, ESPI systems can be divided into temporal phase shift ESPI systems and spatial phase shift ESPI system. This article provides a review and a comparison of temporal and spatial phase shift speckle pattern interferometry for 3D deformation measurement. After an overview of the fundamentals of ESPI theory, temporal phase-shift and spatial phase-shift techniques, 3D deformation measurements by the temporal phase-shift ESPI which is suited well for static measurement and by the spatial phase-shift ESPI which is particularly useful for dynamic measurement will be discussed in detail. Basic theory, brief derivation and different optical layouts for the two systems will be presented. The potentials and limitations of the both ESPI systems will be demonstrated by examples of precise and simultaneous measurement of 3D deformations under either static or dynamic loadings.

Analysis and experimental study of the spherical joint clearance Paper

Peng Zhao, Penghao Hu, Xinxin Bao, Shuaipeng Li

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160E (2013) https://doi.org/10.1117/12.2035728

Read Abstract +

Characteristics of the higher-order resonant cantilever in dynamic atomic force microscopy Paper

Yang Zhao, Qiang-xian Huang, Dan Yuan, Huan-jie You, Hong Xie

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160F (2013) https://doi.org/10.1117/12.2035924

Read Abstract +

Key errors analysis and simulation of a 3-PUU parallel CMM Paper

Shuaipeng Li, Songyuan Li, Peng Zhao, Penghao Hu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160G (2013) https://doi.org/10.1117/12.2035710

Read Abstract +

Measurement uncertainty analysis on laser tracker combined with articulated CMM Paper

Hui-ning Zhao, Lian-dong Yu, Yun Du, Hai-yan Zhang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160H (2013) https://doi.org/10.1117/12.2036484

Read Abstract +

Variable stiffness and damping semi-active vibration control technology based on magnetorheological fluids Paper

Shiyu Zhao, Huaxia Deng, Jin Zhang, ShuaiShuai Sun, Weihua Li, Lei Wang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160I (2013) https://doi.org/10.1117/12.2035903

Read Abstract +

Three-dimensional reconstruction coordinate error induced by asynchronous cameras for moving objects Paper

Yue Wang, Jin Zhang, Huaxia Deng, Ruoyu Fan

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160J (2013) https://doi.org/10.1117/12.2035888

Read Abstract +

Surface roughness measurement based on digital laser speckle pattern by Markov Random Fields Model in wavelet domain Paper

Lei Yang, Rong-sheng Lu, Yan-qiong Shi, Li-qiao Lei, Zhi-jian Liu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160K (2013) https://doi.org/10.1117/12.2035842

Read Abstract +

The optimal design for measurement systems based on uniform accuracy life Paper

Zhen-Ying Cheng, Xiao-Huai Chen, Rui-jun Li, Min-lan Jiang, Ye-tai Fei

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160L (2013) https://doi.org/10.1117/12.2035826

Read Abstract +

Evaluation of measurement uncertainty based on Bayesian information fusion Paper

Shan Wang, Xiaohuai Chen, Qiao Yang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160M (2013) https://doi.org/10.1117/12.2035725

Read Abstract +

A robust sinusoidal signal processing method for interferometers Paper

Xiang-long Wu, Hui Zhang, Yang-Yu Tseng, Kuang-Chao Fan

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160N (2013) https://doi.org/10.1117/12.2035693

Read Abstract +

DSPI system based on spatial carrier phase shifting technique Paper

Yonghong Wang, Junrui Li, Jianfei Sun, Lianxiang Yang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160O (2013) https://doi.org/10.1117/12.2036179

Read Abstract +

Elastic mechanism design of a CMM contact probe Paper

Rui-Jun Li, Kuang-Chao Fan, Hao Zhou, Na Wang, Qiang-xian Huang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160P (2013) https://doi.org/10.1117/12.2035794

Read Abstract +

Measurement of transient surface temperatures during rubbing using infrared thermography Paper

Tau You, Jianwei Yu, Xiaofen Yu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160Q (2013) https://doi.org/10.1117/12.2035869

Read Abstract +

A designed circuit for sintering optical fiber probe Paper

Zhujun Ai, Shanshan Dong, Qing Yang, Nan Lin, Yang Xu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160R (2013) https://doi.org/10.1117/12.2035901

Read Abstract +

Optimization of BRDF measurement method using Spectralon white reflectance standard Paper

Hui-Rong Tao, Xing-Hua Qu, Fu-Min Zhang, Yuan-Qing Zhu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160S (2013) https://doi.org/10.1117/12.2035690

Read Abstract +

An indirect accuracy calibration and uncertainty evaluation method for large scale inner dimensional measurement system Paper

Bai-Ling Liu, Xing-Hua Qu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160T (2013) https://doi.org/10.1117/12.2035486

Read Abstract +

The combined measurement and compensation technology for robot motion error Paper

Rui Li, Xinghua Qu, Yonggang Deng, Bende Liu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160U (2013) https://doi.org/10.1117/12.2035631

Read Abstract +

fiber optic interferometer fringe projector using sinusoidal phase-modulating Paper

Changrong Lv, Fajie Duan, Fukai Zhang, Xiaojie Duan, En Bo, Fan Feng

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160V (2013) https://doi.org/10.1117/12.2035862

Read Abstract +

Simulation and signal analysis of Akiyama probe applied to atomic force microscope Paper

Longlong Wang, Mingzhen Lu, Tong Guo, Sitian Gao, Huakun Zhang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160W (2013) https://doi.org/10.1117/12.2035726

Read Abstract +

Phase modulation dynamic AFM measurement system based on tuning fork probe Paper

Tong Guo, Weijia Chen, Zhichao Wu, Jinping Chen, Xing Fu, Xiaotang Hu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160X (2013) https://doi.org/10.1117/12.2035750

Read Abstract +

Design and finite element analysis of the vibration isolation system of STM Paper

Yunqiang Liu, Xing Fu, Linyan Xu, Yunpeng Song

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160Y (2013) https://doi.org/10.1117/12.2036878

Read Abstract +

An effective signal separation and extraction method using multi-scale wavelet decomposition for phase-sensitive OTDR system Paper

Huijuan Wu, Xiaoyu Li, Hanyu Li, Yu Wu, Yuan Gong, Yunjiang Rao

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89160Z (2013) https://doi.org/10.1117/12.2035836

Read Abstract +

Phase-sensitive Optical-Time-Domain Reflectometry (OTDR) system is a typical distributed fiber-optic sensing technology to detect and locate multiple dynamic disturbances from the outside, which provides a cost-effective and highly sensitive solution especially for monitoring long or ultra-long perimeters. However, the system is liable to be interfered by laser frequency drifts and environmental noises due to its phase sensitivity. The fluctuant and time-varying backgrounds severely obscure real intrusion signals, which always cause bad detection results or high Nuisance Alarm Rates (NARs). In this paper, an effective signal separation method is proposed to extract true intrusion information from the complicated noisy backgrounds of phase-sensitive OTDR system. The sensing signal in the time-domain at each spatial point is obtained by accumulating the changing trails at different moments. Multi-scale wavelet decomposition is employed on the temporal signal to get the detailed components at different scales. By selectively recombining the scale components, it can easily extract the real intrusion signal, and separate the fluctuant frequency-drift induced phase noises, and the time-varying sound or other interferences caused by the air movements, which are respectively located at different time-frequency components. Moreover, the experimental results show that the event type could be divided and discerned from the time-frequency energy distribution at different scale. Thus nuisance and false alarms in practical applications of phase-sensitive OTDR system can be decreased significantly by this way of signal separation and extraction. This technique provides a useful solution for the intrusion detection and identification of the phase-sensitive OTDR in complicated environments, and paves the way for many important applications such as long perimeter security, oil or gas pipe safety monitoring, large-scale structure health detection and fault diagnosis and so on.

Analysis of the forces in electrostatic force microscopy for profile measurement of micro-structured surface of dielectric Paper

Gaofa He, Zhigang Jia, So Ito, Yuki Shimizu, Wei Gao

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891610 (2013) https://doi.org/10.1117/12.2035716

Read Abstract +

A kinematic parameter calibration method for articulated arm coordinate measuring machine Paper

Shuang Zhao, Lianqing Zhu, Qingshan Chen, Zhikang Pan, Yangkuan Guo

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891611 (2013) https://doi.org/10.1117/12.2035784

Read Abstract +

Technique of laser confocal and Raman spectroscopy for living cell analysis Paper

Xiaochen Meng, Lianqing Zhu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891612 (2013) https://doi.org/10.1117/12.2035491

Read Abstract +

All-fiber Q-switched ytterbium-doped fiber laser in MOPA configurations Paper

Wei He, Lianqing Zhu, Yinmin Zhang, Mingli Dong, Xiaohuai Chen

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891613 (2013) https://doi.org/10.1117/12.2035827

Read Abstract +

Harmonic distortion analysis of a Mach-Zehnder intensity modulator Paper

Xiaoqing Zhang, Shuling Hu, Yudong Jia, Zhehai Zhou, Lei Liao

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891614 (2013) https://doi.org/10.1117/12.2035920

Read Abstract +

Design of high current voltage conversion circuit based on LT3743 Paper

Guang Cai, Xiaoping Lou, Yinmin Zhang, Yunxiao Na, Qianzhe Liu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891615 (2013) https://doi.org/10.1117/12.2035904

Read Abstract +

Structure parameters optimization and system simulation of a double-triangulation probe Paper

De Cheng, Xiaoping Lou, Qianzhe Liu, Mingli Dong

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891616 (2013) https://doi.org/10.1117/12.2035807

Read Abstract +

Dynamic measurement of deformation using Fourier transform digital holographic interferometry Paper

Xinya Gao, Sijin Wu, Lianxiang Yang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891617 (2013) https://doi.org/10.1117/12.2035889

Read Abstract +

Research on amplification and peak-holding circuits of nanosecond light pulse Paper

Liu Hao, Yinming Zhang, Yunxiao Na

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891618 (2013) https://doi.org/10.1117/12.2035894

Read Abstract +

An improved centroid location algorithm for Infrared LED feature points Paper

Shaoqiong Wang, Bixi Yan, Mingli Dong, Jun Wang, Peng Sun

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891619 (2013) https://doi.org/10.1117/12.2035814

Read Abstract +

Simulation research of acousto optic modulator drive based on Multisim Paper

Shiqian Wang, Yangkuan Guo, Lianqing Zhu, Yunxiao Na, Yinmin Zhang, Qianzhe Liu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161A (2013) https://doi.org/10.1117/12.2035849

Read Abstract +

An accuracy evaluating method for image point location based on linear fitting Paper

Liang Xu, Mingli Dong, Jun Wang, Peng Sun

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161B (2013) https://doi.org/10.1117/12.2035798

Read Abstract +

Quasi-distributed temperature sensor system based on various-packaged FBG Paper

Yinmin Zhang, Qianzhe Liu, Wei He, Lianqing Zhu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161C (2013) https://doi.org/10.1117/12.2035900

Read Abstract +

Optical tweezers based on cylindrical vector beams Paper

Yongheng Xu, Zhehai Zhou, Xiaolin Zhang, Zhidan Zhao, Lianqing Zhu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161D (2013) https://doi.org/10.1117/12.2035865

Read Abstract +

Measuring the lens focal length by laser confocal technique Paper

Hualing Wu, Jiamiao Yang, Liurong Qiu, Weiqian Zhao

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161E (2013) https://doi.org/10.1117/12.2035803

Read Abstract +

A method for extracting feature points of micro-calibration sample Paper

Yanzhao Niu, Jianjun Pan, Xiaofei Wang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161F (2013) https://doi.org/10.1117/12.2035898

Read Abstract +

A variable weighted centroid method for retro reflective target locating Paper

Wei Zhuang, Ming li Dong, Peng Sun, Jun Wang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161G (2013) https://doi.org/10.1117/12.2035767

Read Abstract +

Digital approach to stabilizing optical frequency combs and beat notes of CW lasers Paper

Martin Čížek, Ondřej Číp, Radek Šmíd, Jan Hrabina, Břetislav Mikel, Josef Lazar

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161H (2013) https://doi.org/10.1117/12.2035733

Read Abstract +

Calibration of elongation of fiber Bragg gratings by laser interferometer Paper

Bretislav Mikel, Martin Cizek, Milan Holik, Ondrej Cip

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161I (2013) https://doi.org/10.1117/12.2035731

Read Abstract +

Interferometry with suppression of fast fluctuations of the refractive index of air for nanometrology Paper

Josef Lazar, Miroslava Hola, Jan Hrabina, Zdenek Buchta, Ondrej Cip

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161J (2013) https://doi.org/10.1117/12.2035553

Read Abstract +

The investigation of electrolytic surface roughening for PCB copper foil Paper

Shuo-Jen Lee, Chao-Kai Liu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161K (2013) https://doi.org/10.1117/12.2036879

Read Abstract +

A three-degree-of-freedom hybrid vibration isolation system using adaptive proportional control supported by passive weight support mechanism Paper

Yun-Hui Liu, Wei-Hao Wu, Chih-Liang Chu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161L (2013) https://doi.org/10.1117/12.2036172

Read Abstract +

Development of a micro-CMM with scanning touch probe and high-precision coplanar platform Paper

Chih-Liang Chu, Chin-Tu Lu, Hung-Chi Chen, Jhih-Sian Ke, Chao-Ming Chang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161M (2013) https://doi.org/10.1117/12.2035896

Read Abstract +

The performance of an inspection system for indium tin oxide circuits by using a PDLC/ITO film Paper

C.-H. Chan, Y.-T. Zou, C.-T. Chen, T.-K. Liu, C.-H. Chen, H.-W. Wang, S.-C. Lin

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161N (2013) https://doi.org/10.1117/12.2035682

Read Abstract +

Optimizing the structure of a four-axis polarized scattering instrument using a double-loop approach Paper

Chien-Jong Shih, Tso-Liang Teng, Yong-An Huang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161O (2013) https://doi.org/10.1117/12.2035632

Read Abstract +

Optical magnetic field sensor improved by NdFeB ferromagnetic film Paper

Truong Giang Nguyen, Xinbing Jiao, Wenfeng Lei, Yue Ma, Lixin Ma, Bo Qian

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161P (2013) https://doi.org/10.1117/12.2035696

Read Abstract +

Structure design and characteristic analysis of micro-nano probe based on six dimensional micro-force measuring principle Paper

Hong-tao Yang, Chun-mei Cai, Chuan-zhi Fang, Tian-feng Wu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161Q (2013) https://doi.org/10.1117/12.2035715

Read Abstract +

Research and analysis of AC sampling standard value converting circuits Paper

Lili Mu, Zhijing Li, Zekuan Chen

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161R (2013) https://doi.org/10.1117/12.2035802

Read Abstract +

Research on the working characteristic of Hall current sensor and the "modeling-deviation compensation" algorithm Paper

Lili Mu, Zekuan Chen, Zhijing Li

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161S (2013) https://doi.org/10.1117/12.2035914

Read Abstract +

Multimodal image registration based on SURF and KD tree Paper

Zongyun Gu, Yunxia Yin, Chunming Du

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161T (2013) https://doi.org/10.1117/12.2035875

Read Abstract +

Study on real-time elevator brake failure predictive system Paper

Jun Guo, Jinwei Fan

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161U (2013) https://doi.org/10.1117/12.2035684

Read Abstract +

Data repair method in incomplete free-surface measurement Paper

Zhongyu Wang, Qiang Li, Hu Yan, Qian Wang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161V (2013) https://doi.org/10.1117/12.2035595

Read Abstract +

Radial pressure sensor of sucker rod based on LabVIEW Paper

Zhongyu Wang, Hu Yan, Qiang Li

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161W (2013) https://doi.org/10.1117/12.2035598

Read Abstract +

FPGA-based signal processing method of automatic interference comparator Paper

Zhongyu Wang, Haitao Chang, Hongtang Gao, Xiaoyou Ye

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161X (2013) https://doi.org/10.1117/12.2035599

Read Abstract +

Digital image correlation method for measuring thermal deformation of composite materials Paper

Li Jiang, Yan He, Dong-wei Wang, Ke Liu, Wei-ren Wu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161Y (2013) https://doi.org/10.1117/12.2035626

Read Abstract +

Experimental research on anti-vibration interferometry based on time-frequency-domain analysis Paper

Yao Hu, Qun Hao, Fanghua Zhang, Yuhan Tian

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89161Z (2013) https://doi.org/10.1117/12.2035878

Read Abstract +

Fast filtering of surface topography of micro-optics using non-local means Paper

Xiangchao Zhang, Hao Zhang, Xiaoying He, Min Xu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891620 (2013) https://doi.org/10.1117/12.2035838

Read Abstract +

Uncertainty evaluation for a three dimensional rotary measuring system by Markov chain Monte Carlo method Paper

Bo Chen, Xiangchao Zhang, Hao Zhang, Xiaoying He, Min Xu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891621 (2013) https://doi.org/10.1117/12.2035834

Read Abstract +

Feasibility study of detection of chatter by using FBG during boring Paper

P. Y. Zhu, W. Peng, L. Yuan, Z. J. Hu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891622 (2013) https://doi.org/10.1117/12.2035882

Read Abstract +

Radius measurement using a parallel two-step spatial carrier phase-shifting common-path interferometer Paper

Bengong Hao, Ming Diao, Zhi Zhong, Mingguang Shan, Yabin Zhang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891623 (2013) https://doi.org/10.1117/12.2035755

Read Abstract +

Image edge enhancement for moving objects with a spiral phase filter Paper

Mingguang Shan, Shanshan Bao, Zhi Zhong, Bengong Hao, Chengquan An

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891624 (2013) https://doi.org/10.1117/12.2035764

Read Abstract +

3D measurement method based on combined temporal encoding structured light Paper

Xiaoyang Yu, Yang Wang, Shuang Yu, Hao Cheng, Xiaoming Sun, Shuchun Yu, Deyun Chen

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891625 (2013) https://doi.org/10.1117/12.2035871

Read Abstract +

Research of temperature field measurement using a flexible temperature sensor array for robot sensing skin Paper

Ying Huang, Siyu Wu, Ruiqi Li, Qinghua Yang, Yugang Zhang, Caixia Liu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891626 (2013) https://doi.org/10.1117/12.2035833

Read Abstract +

Dual AFM probes alignment based on vision guidance Paper

Hua-kun Zhang, Si-tian Gao, Ming-zhen Lu, Long-long Wang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891627 (2013) https://doi.org/10.1117/12.2035775

Read Abstract +

A high-accuracy signal processing algorithm for frequency scanned interferometry Paper

Shuai Zhang, Liangen Yang, Xuanze Wang, Zhongsheng Zhai, Wenchao Liu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891628 (2013) https://doi.org/10.1117/12.2035708

Read Abstract +

Study on the three-station typical network deployments of workspace Measurement and Positioning System Paper

Zhi Xiong, J. G. Zhu, B. Xue, Sh. H. Ye, Y. Xiong

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891629 (2013) https://doi.org/10.1117/12.2035624

Read Abstract +

Positioning method for a visual guiding system in a laser welding machine Paper

Tao He, Youqing Fan, Yulang Xie, Qinghua Wu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162A (2013) https://doi.org/10.1117/12.2035699

Read Abstract +

Numeric character recognition method based on fractal dimension Paper

Tao He, Yulang Xie, Jiuyin Chen, Longfei Cheng, Ye Yuan

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162B (2013) https://doi.org/10.1117/12.2035619

Read Abstract +

Measurement error analysis of the 3D four-wheel aligner Paper

Qiancheng Zhao, Tianlong Yang, Dongzhao Huang, Xun Ding

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162C (2013) https://doi.org/10.1117/12.2035870

Read Abstract +

Optimized design of a band-pass filter with low frequency and narrow bandwidth Paper

Biao Tian, Guo-hong Fu, Xiu-ying Liao, Hui Cheng, Guang Li

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162D (2013) https://doi.org/10.1117/12.2035867

Read Abstract +

An apparatus for non-contact measuring profile of precision rotor based on laser triangulation Paper

Xiyun Yin, Tianlong Yang, Qiancheng Zhao, Dongzhao Huang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162E (2013) https://doi.org/10.1117/12.2035866

Read Abstract +

Mine rescue capsule dynamics modeling and stress analysis Paper

Shuyi Yang, Jingjing Li, Yaobin Sun

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162F (2013) https://doi.org/10.1117/12.2035879

Read Abstract +

A new thin-wall beam modal testing method based on single point laser continuous plane scanning vibration measurement Paper

Jigang Wu, Bin Qin, Xuejun Li, Qiancheng Zhao

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162G (2013) https://doi.org/10.1117/12.2035704

Read Abstract +

Self-adaptive grain recognition of diamond grinding wheel and its grains assessment Paper

Changcai Cui, Lijun Zhou, Qing Yu, Hui Huang, Ruifang Ye

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162H (2013) https://doi.org/10.1117/12.2035785

Read Abstract +

Correction on the effect of numerical aperture in optical scatterometry Paper

Weiqi Li, Shiyuan Liu, Chuanwei Zhang, Xiuguo Chen, Honggang Gu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162I (2013) https://doi.org/10.1117/12.2035546

Read Abstract +

Optical character and calibration of 3D vision sensor Paper

Fayun Liang, Guo Liu, Xiaoming He, Hui He, Jiansheng Shi, Hua Zhang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162J (2013) https://doi.org/10.1117/12.2035841

Read Abstract +

Design of PSD based solar direction sensor Paper

Guili Xu, Zhiwei Zhong, Biao Wang, Ruipeng Guo, Yupeng Tian

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162K (2013) https://doi.org/10.1117/12.2035830

Read Abstract +

Smooth sliding mode control with a disturbance observer for a virtual axis parallel mechanism Paper

Daogen Jiang, Zhenhua Wang, Zhenqi Wang, Xiaotong Zhang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162L (2013) https://doi.org/10.1117/12.2035766

Read Abstract +

Simulation and design of a fiber Bragg grating flow sensor Paper

Qi Jiang, Fangfang Gao

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162M (2013) https://doi.org/10.1117/12.2035956

Read Abstract +

Design and study of a vibrating string accelerometer based on fiber Bragg grating Paper

Qi Jiang, Minghao Yu, Lingling Sun

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162N (2013) https://doi.org/10.1117/12.2035960

Read Abstract +

Placement of the material temperature sensor during measuring the accuracy of CNC machine tools Paper

Dong-sheng Zhao, Min-qiang Jia, Jian Zhang, Lei Sun, Wei-jun Li

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162O (2013) https://doi.org/10.1117/12.2035876

Read Abstract +

Aberration measurement for progressive addition lens based on Hartmann-Shack Sensor Paper

Lan Zhu, Jiabi Chen, Jianghua Xu, Huimin Pan, Haowei Zhang, Songlin Zhuang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162P (2013) https://doi.org/10.1117/12.2035742

Read Abstract +

A study on the quality of micro-hole of Ti-6Al-4V by EDM process with on-machine measurement techniques Paper

Jun Li, Xiaoyu Liu, Xingping Wei, Shiping Zhao

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162Q (2013) https://doi.org/10.1117/12.2035629

Read Abstract +

A regression-based approach to tolerance values forecasting in micro/meso-scale for micro non-monolithic components Paper

Xiaoyu Liu, Xingping Wei, Jun Li, Shiping Zhao

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162R (2013) https://doi.org/10.1117/12.2035554

Read Abstract +

Soil water evaporation measurement of lysimeter based on fiber Bragg grating sensor Paper

Kejun Yan, Jun Liu, Liping Miao, Li Bai, Wenting Zhong

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162S (2013) https://doi.org/10.1117/12.2035819

Read Abstract +

Retrieval of aerosol size distribution based on GCV regularization with optical data of lidar Paper

Hu Zhao, Dengxin Hua, Huige Di, Yufeng Wang, Huan Zhao, Jiandong Mao

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162T (2013) https://doi.org/10.1117/12.2035531

Read Abstract +

Pulse modulation method for LED lidar light source Paper

Wenting Zhong, Jun Liu, Dengxin Hua, Fang Wang, Kejun Yan

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162U (2013) https://doi.org/10.1117/12.2035607

Read Abstract +

Design of dual wavelength micro pulse polarization lidar system Paper

Yuehui Song, Dengxin Hua, Shichun Li, Yufeng Wang, Wenhui Xin, Huige Di

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162V (2013) https://doi.org/10.1117/12.2035637

Read Abstract +

A novel Retinex algorithm based on alternating direction optimization Paper

Xueyang Fu, Qin Lin, Wei Guo, Yue Huang, Delu Zeng, Xinghao Ding

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162W (2013) https://doi.org/10.1117/12.2035610

Read Abstract +

Dynamic model of liquid copper temperature based on weighted LS-SVM Paper

Yingdao Li, Lingjian Ye, Hongwei Guan, Weihong Zhong, Xiushui Ma

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162X (2013) https://doi.org/10.1117/12.2035524

Read Abstract +

Design of energy-saving control system for LED street lamps Paper

Xiao Ding, Wenguang Jin

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162Y (2013) https://doi.org/10.1117/12.2035722

Read Abstract +

Spectrum measurement for LED-based spectrum-tunable source Paper

Ning Jia, Zhenrong Zheng, Yang Yang, Huihui Wang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89162Z (2013) https://doi.org/10.1117/12.2035848

Read Abstract +

Noise reduction of laser scanning data based on self-estimated angular threshold Paper

Yaofeng Wu, Wen Wang, Keqing Lu, Yanding Wei, Zichen Chen

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891630 (2013) https://doi.org/10.1117/12.2035744

Read Abstract +

Research status and developing trends of grating nanometer measuring technology Paper

Minlan Jiang, Huifeng Li, Xiaodong Wang, Jianguo Shen

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891631 (2013) https://doi.org/10.1117/12.2035685

Read Abstract +

Roundness measuring instrument for 2-dimensional standards Paper

Wei Nong Wang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891632 (2013) https://doi.org/10.1117/12.2035806

Read Abstract +

Vibration criteria for vibration-sensitive laboratory based on intrinsic microseism Paper

Chenguang Cai, Biao Zhou, Jingsheng Li

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891633 (2013) https://doi.org/10.1117/12.2038335

Read Abstract +

Development and measurement of single layer thickness standard Paper

Jianjun Cui, Sitian Gao, Hua Du, Xiaoping Zhu, Liping Yan

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891634 (2013) https://doi.org/10.1117/12.2035503

Read Abstract +

Critical dimensional linewidth calibration using UV microscope and laser interferometry Paper

Qi Li, Si-tian Gao, Wei Li, Ming-zhen Lu, Ming-kai Zhang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891635 (2013) https://doi.org/10.1117/12.2035850

Read Abstract +

Bearing fault diagnosis based on scale-transformation stochastic resonance Paper

Ying Cui, Jun Zhao, Tiantai Guo, Yuqian Song

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891636 (2013) https://doi.org/10.1117/12.2035623

Read Abstract +

A dedicated on-line detecting system for auto air dryers Paper

Chao-yu Shi, Zai Luo

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891637 (2013) https://doi.org/10.1117/12.2035754

Read Abstract +

Detection technology research on the one-way clutch of automatic brake adjuster Paper

Wensong Jiang, Zai Luo, Yi Lu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891638 (2013) https://doi.org/10.1117/12.2035537

Read Abstract +

Measurement system for characterizing surface friction properties of textile materials Paper

Bao-guo Yao, Yun-juan Yang, Zhe-feng Zhang, Li-xia Yan

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891639 (2013) https://doi.org/10.1117/12.2035893

Read Abstract +

Key techniques of ultra-precision aerostatic system Paper

Dongsheng Li, Jiafu Li, Ting Cui, Jiacheng Hu, Yang Cheng, Meibao Wang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163A (2013) https://doi.org/10.1117/12.2035787

Read Abstract +

ROIC with on-chip sigma-delta AD converter for HgCdTe e-APD FPA Paper

Guoqiang Chen, Junling Zhang, Pan Wang, Jie Zhou, Lei Gao, Ruijun Ding

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163B (2013) https://doi.org/10.1117/12.2035479

Read Abstract +

HgCdTe electron injection avalanche photodiodes (e-APDs) work at linear mode. A weak optical current signal is amplified orders of magnitude due to the internal avalanche mechanism and it has been demonstrated to be one of the most promising methods to focal-plane arrays (FPAs) for low-flux like hyper-spectral imaging and high-speed applications such as active imaging. This paper presents the design of a column-shared ADC for cooled e-APDs FPA. Designing a digital FPA requires fulfilling very stringent requirements in terms of power consumption, silicon area and speed. Among the various ADC architectures sigma-delta conversion is a promising solution for high-performance and medium size FPA such as 128×128. The performance of Sigma-delta ADC rather relies on the modulator structure which set over-sampling and noise shaping characteristics than on critical analog circuits. This makes them quite robust and flexible. A multistage noise shaping (MASH) 2-1 single bit architecture sigma-delta conversion with switched-capacitor circuits is designed for column-shared ADC, which is implanted in the GLOBALFOUNDRIES 0.35um CMOS process with 4-poly and 4-metal on the basis of a 100um pixel pitch. It operates under 3.3V supply and the output range of the quantizer is 2V. A quantization noise subtraction circuit in modulator is designed to subtract the quantization noise of first-stage modulator. The quantization noise of the modulator is shaped by a high-pass filter. The silicon area and power consumption are mainly determined by the decimation low pass filter. A cascaded integrator-comb (CIC) filter is designed as the digital decimator filter. CIC filter requires no multipliers and use limited storage thereby leading to more economical hardware implementation. The register word length of the filter in each stage is carefully dimensioned in order to minimize the required hardware. Furthermore, the digital filters operate with a reduced supply voltage to 1.5V. Simulation results show that the modulator achieves the resolution higher than 12bits and 2.4mW power consumption per ADC at 7.7k Samples/s rate.

Multi-beam synchronous measurement based on PSD phase detection using frequency-domain multiplexing Paper

Ying Duan, Lan Qin, Lian Xue, Feng Xi, Jiubing Mao

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163C (2013) https://doi.org/10.1117/12.2035899

Read Abstract +

A novel design of parallel piezoelectric six-degree-of-freedom accelerometer Paper

Huayi Lv, Lan Qin, Jun Liu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163F (2013) https://doi.org/10.1117/12.2035847

Read Abstract +

Transformation method from incremental angular displacement sensors to absolute angular displacement sensors Paper

Fangyan Zheng

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163G (2013) https://doi.org/10.1117/12.2035885

Read Abstract +

Dynamic high-speed acquisition system design of transmission error with USB based on LabVIEW and FPGA Paper

Yong Zheng, Yan Chen

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163H (2013) https://doi.org/10.1117/12.2035606

Read Abstract +

Dynamic self-calibration of time grating sensors based on self-adaptive Kalman filter algorithm Paper

Ziran Chen

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163I (2013) https://doi.org/10.1117/12.2035884

Read Abstract +

Error analysis and modeling for the time grating length measurement system Paper

Zhonghua Gao, Jiqin Fen, Fangyan Zheng, Ziran Chen, Donglin Peng, Xiaokang Liu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163J (2013) https://doi.org/10.1117/12.2035697

Read Abstract +

An improved SURF descriptor based on sector area partitioning Paper

Luan Zeng, You Zhai, Xiu-hua Fang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163K (2013) https://doi.org/10.1117/12.2035753

Read Abstract +

Kinematic modeling and simulation of articulated arm coordinate measuring machines based on MCPC method Paper

Jian Lu, Guanbin Gao

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163L (2013) https://doi.org/10.1117/12.2035857

Read Abstract +

Development of automobile tyre lateral runout measurement sensor Paper

Xie Ma, Lingjian Ye, Guanghui Yao, Di Wang, Xiongfei Zhi

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163M (2013) https://doi.org/10.1117/12.2036092

Read Abstract +

A novel DSSS based ToF measurement method for short baseline and its application in sound velocimeter Paper

Shen Zhao, Yueke Wang, Chunjie Qiao, Chao Zhou

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163N (2013) https://doi.org/10.1117/12.2035701

Read Abstract +

Transmitting pulse signal design for ultrasonic time of flight measurement in short baseline framework Paper

Shen Zhao, Yueke Wang, Chunjie Qiao, Chao Zhou

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163O (2013) https://doi.org/10.1117/12.2035497

Read Abstract +

Precise ultrasonic ranging based on pseudo-random sequence modulated continuous signal processing Paper

Chunjie Qiao, Zhigang Huang, Chao Zhou

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163P (2013) https://doi.org/10.1117/12.2035821

Read Abstract +

A robust data fusion scheme for integrated navigation systems employing fault detection methodology augmented with fuzzy adaptive filtering Paper

Muhammad Ushaq, Jiancheng Fang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163Q (2013) https://doi.org/10.1117/12.2035618

Read Abstract +

Integrated navigation systems for various applications, generally employs the centralized Kalman filter (CKF) wherein all measured sensor data are communicated to a single central Kalman filter. The advantage of CKF is that there is a minimal loss of information and high precision under benign conditions. But CKF may suffer computational overloading, and poor fault tolerance. The alternative is the federated Kalman filter (FKF) wherein the local estimates can deliver optimal or suboptimal state estimate as per certain information fusion criterion. FKF has enhanced throughput and multiple level fault detection capability. The Standard CKF or FKF require that the system noise and the measurement noise are zero-mean and Gaussian. Moreover it is assumed that covariance of system and measurement noises remain constant. But if the theoretical and actual statistical features employed in Kalman filter are not compatible, the Kalman filter does not render satisfactory solutions and divergence problems also occur. To resolve such problems, in this paper, an adaptive Kalman filter scheme strengthened with fuzzy inference system (FIS) is employed to adapt the statistical features of contributing sensors, online, in the light of real system dynamics and varying measurement noises. The excessive faults are detected and isolated by employing Chi Square test method. As a case study, the presented scheme has been implemented on Strapdown Inertial Navigation System (SINS) integrated with the Celestial Navigation System (CNS), GPS and Doppler radar using FKF. Collectively the overall system can be termed as SINS/CNS/GPS/Doppler integrated navigation system. The simulation results have validated the effectiveness of the presented scheme with significantly enhanced precision, reliability and fault tolerance. Effectiveness of the scheme has been tested against simulated abnormal errors/noises during different time segments of flight. It is believed that the presented scheme can be applied to the navigation system of aircraft or unmanned aerial vehicle (UAV).

Design of scrap copper separation control system based eddy current sensor Paper

Di Wang, Xiushui Ma, Lingjian Ye, Guanghui Yao, Shuming Zhang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163R (2013) https://doi.org/10.1117/12.2036085

Read Abstract +

The 3D visualization technology research of submarine pipeline based Horde3D GameEngine Paper

Guanghui Yao, Xiushui Ma, Genlang Chen, Lingjian Ye

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163S (2013) https://doi.org/10.1117/12.2036087

Read Abstract +

LED uniform illumination system for DMD-based confocal microscopy Paper

Kaimin Xiao, Wenmei Hou, Qixin Xu, Bofang Peng

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163T (2013) https://doi.org/10.1117/12.2035730

Read Abstract +

Research on direct calibration method of eye-to-hand system of robot Paper

Xiaoping Hu, Ke Xie, Tao Peng

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163U (2013) https://doi.org/10.1117/12.2035789

Read Abstract +

3D reconstruction of surface based on binocular vision Paper

Xiaoping Hu, Tao Peng, Ke Xie

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163V (2013) https://doi.org/10.1117/12.2035890

Read Abstract +

A study on the fabrication of main scale of linear encoder using continuous roller imprint method Paper

Shanjin Fan, Yongsheng Shi, Lei Yin, Long Feng, Hongzhong Liu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163W (2013) https://doi.org/10.1117/12.2035762

Read Abstract +

Study on technology of double parallel-joints coordinate measuring machine Paper

Guisuo Xia, Cheng Liao, Runqiao Yu, Yanjun Fu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163X (2013) https://doi.org/10.1117/12.2035916

Read Abstract +

Three-dimensional shape measurement based on a combination of gray-code and phase-shift light projection Paper

Zhigang Wang, Yanjun Fu, Jie Yang, Guisuo Xia, Jiasheng Wang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163Y (2013) https://doi.org/10.1117/12.2035700

Read Abstract +

An improving demodulation of interferometric fiber optic sensor technology Paper

Li Gao, Yong Li, Zhaorui Chu, Ming Wu, Nan Lin

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89163Z (2013) https://doi.org/10.1117/12.2035911

Read Abstract +

Digital optimeter based on linear CCD Paper

Qing Hu, Yuanling Xu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891640 (2013) https://doi.org/10.1117/12.2035786

Read Abstract +

Research on working clearance optimization for non-contact stress detection with magneto-elastic stress sensor Paper

Yingfu Guo, Guiqing Tang, Wenyun Wang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891641 (2013) https://doi.org/10.1117/12.2035928

Read Abstract +

Arbitrary and absolute length measurement based on time-of-flight method using femtosecond optical frequency comb Paper

Shujian Xing, Fumin Zhang, Shiying Cao, Xinghua Qu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891642 (2013) https://doi.org/10.1117/12.2035729

Read Abstract +

The accuracy analysis of the intersection measurement on the moving ships Paper

Miao Wang, Qiu-sha Shan, Kai Liu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891643 (2013) https://doi.org/10.1117/12.2035540

Read Abstract +

Extending the measuring range of fiber optic displacement sensor with differential evolution optimized extreme learning machine Paper

Xiaodong Wang, Meiying Ye, Minlan Jiang

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891644 (2013) https://doi.org/10.1117/12.2035777

Read Abstract +

Image measurement technique on vibration amplitude of ultrasonic horn Paper

Yong-bin Zhang, Zhi-qun Wu, Jian-ping Zhu, Jian-guo He, Guang-min Liu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891645 (2013) https://doi.org/10.1117/12.2035683

Read Abstract +

Study on detection method of inner wall of small-diameter workpiece based on cone reflector Paper

Wenjun Lu, Yao Yao, Chao Li, Xin Chen, Licheng Shen, Lihua Lei, Weibin Sun

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891646 (2013) https://doi.org/10.1117/12.2036090

Read Abstract +

A verification device for the stylus profilometer sensor Paper

Lei Guo, Xiao-jun Liu, Li-ping Zhou, Wen-long Lu, Wen-bing Zhong, Yin Luo

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891647 (2013) https://doi.org/10.1117/12.2041638

Read Abstract +

A small angle dynamic measuring device Paper

Jie Wang, Xiaojun Liu, Liping Zhou, Wenlong Lu, Liangzhou Chen, Yimin Zou

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891648 (2013) https://doi.org/10.1117/12.2041641

Read Abstract +

Comprehensive evaluation of surface topography in running-in wear process Paper

Geng-pei Zhang, Xiao-jun Liu, Wen-long Lu

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 891649 (2013) https://doi.org/10.1117/12.2041643

Read Abstract +

Research on pre-processing of QR Code Paper

Haixing Sun, Haojie Xia, Ning Dong

Proceedings Volume Sixth International Symposium on Precision Mechanical Measurements, 89164B (2013) https://doi.org/10.1117/12.2042042

Read Abstract +

Keywords/Phrases

Search In:

Publication Years