Paper
17 January 2011 20 Gbps optical link with high-efficiency 1060 nm VCSEL
Jean Benoit Héroux, Keishi Takaki, Masao Tokunari, Shigeru Nakagawa
Author Affiliations +
Abstract
Measurement results of a high speed, low power single channel optical link operating at 1060 nm are presented. The link is composed of low power VCSEL devices fabricated and provided by Furukawa Electric Co. Ltd. and a low cost OM2 fiber. Clear eye openings are observed at 20 Gbps with a 2 mA DC bias. A modulation voltage of 150 mVp-p results in a -4.1 dBm OMA at the fiber output in a back-to-back configuration, with 0.19 unit amplitude eye opening and 32 ps total jitter extrapolated to a 10-12 bit error ratio. The insertion of a 100 m-long OM2 fiber causes a small signal degradation due to low attenuation and dispersion. For an ideal index profile optimized for dual wavelength operation (850 and 1300 nm), the minimum modal dispersion of the fiber is in the vicinity of the current operation wavelength.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jean Benoit Héroux, Keishi Takaki, Masao Tokunari, and Shigeru Nakagawa "20 Gbps optical link with high-efficiency 1060 nm VCSEL", Proc. SPIE 7944, Optoelectronic Interconnects and Component Integration XI, 79440A (17 January 2011); https://doi.org/10.1117/12.873726
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Eye

Vertical cavity surface emitting lasers

Dispersion

Signal attenuation

Waveguides

Picosecond phenomena

Channel projecting optics

RELATED CONTENT

50 Gb s NRZ and 4 PAM data transmission over...
Proceedings of SPIE (February 19 2018)
Tunable silicon CROW delay lines
Proceedings of SPIE (May 17 2010)
Design And Fabrication Of Single-Mode Cable
Proceedings of SPIE (November 08 1983)

Back to Top