Fast characterization of line-end shortening and application of novel correction algorithms in e-beam direct write

Martin Freitag; Kang-Hoon Choi; Manuela Gutsch; Christoph Hohle; Reinhard Galler; Michael Krüger; Ulf Weidenmueller

doi:10.1117/12.879582

4 April 2011 Fast characterization of line-end shortening and application of novel correction algorithms in e-beam direct write

Martin Freitag, Kang-Hoon Choi, Manuela Gutsch, Christoph Hohle, Reinhard Galler, Michael Krüger, Ulf Weidenmueller

Author Affiliations +

Proceedings Volume 7970, Alternative Lithographic Technologies III; 79701C (2011) https://doi.org/10.1117/12.879582
Event: SPIE Advanced Lithography, 2011, San Jose, California, United States

Abstract

For the manufacturing of semiconductor technologies following the ITRS roadmap, we will face the nodes well below 32nm half pitch in the next 2~3 years. Despite being able to achieve the required resolution, which is now possible with electron beam direct write variable shaped beam (EBDW VSB) equipment and resists, it becomes critical to precisely reproduce dense line space patterns onto a wafer. This exposed pattern must meet the targets from the layout in both dimensions (horizontally and vertically). For instance, the end of a line must be printed in its entire length to allow a later placed contact to be able to land on it. Up to now, the control of printed patterns such as line ends is achieved by a proximity effect correction (PEC) which is mostly based on a dose modulation. This investigation of the line end shortening (LES) includes multiple novel approaches, also containing an additional geometrical correction, to push the limits of the available data preparation algorithms and the measurement. The designed LES test patterns, which aim to characterize the status of LES in a quick and easy way, were exposed and measured at Fraunhofer Center Nanoelectronic Technologies (CNT) using its state of the art electron beam direct writer and CD-SEM. Simulation and exposure results with the novel LES correction algorithms applied to the test pattern and a large production like pattern in the range of our target CDs in dense line space features smaller than 40nm will be shown.

Citation Download Citation

Martin Freitag, Kang-Hoon Choi, Manuela Gutsch, Christoph Hohle, Reinhard Galler, Michael Krüger, and Ulf Weidenmueller "Fast characterization of line-end shortening and application of novel correction algorithms in e-beam direct write", Proc. SPIE 7970, Alternative Lithographic Technologies III, 79701C (4 April 2011); https://doi.org/10.1117/12.879582

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available