Paper
13 November 2019 Construction of a robust three-degree-of-freedom laser measurement system for measuring motion error of long-travel linear stages
Author Affiliations +
Proceedings Volume 11343, Ninth International Symposium on Precision Mechanical Measurements; 1134320 (2019) https://doi.org/10.1117/12.2548881
Event: International Symposium on Precision Mechanical Measurements 2019, 2019, Chongqing, China
Abstract
This paper presents a robust and low-cost three-degree-of-freedom laser measurement system (3DOFLMS) that can measure both straightness error and roll angular error of long-travel linear stages. A low-cost laser diode is adopted as the laser source. A beam drift compensation module is employed to improve the stability of the 3DOFLMS. The relationships between the sensitivity of detector, the dual-beam parallelism and the measurement distance along the laser propagation direction are theoretical analyzed. Compensation methods are then proposed for eliminating the effects of detector sensitivity variation, beam drift and misalignment on the accuracy of the measurement system. The effectiveness of the compensation methods and the feasibility of the designed measurement system are demonstrated by a series of experiments. With the comparisons between commercial measurement instruments and the proposed measurement system in the measurement distance up to 1 m, the measurement accuracy of straightness errors and roll angular error are within ±1.0 μm and ±1.2 arcsec, respectively. The designed measurement system is very easy to construct both in the laboratory environment and in the actual measurement environment.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yindi Cai, Qi Sang, Binhe Yang, Baokai Feng, and Kuang-Chao Fan "Construction of a robust three-degree-of-freedom laser measurement system for measuring motion error of long-travel linear stages", Proc. SPIE 11343, Ninth International Symposium on Precision Mechanical Measurements, 1134320 (13 November 2019); https://doi.org/10.1117/12.2548881
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Calibration

Beam splitters

Laser systems engineering

Motion measurement

Semiconductor lasers

RELATED CONTENT

A compact 4-DOF measurement system for machine tools
Proceedings of SPIE (November 13 2019)
Sensor array for tracking systems
Proceedings of SPIE (October 10 2007)
Newcomb: a small astrometric interferometer
Proceedings of SPIE (June 26 1995)

Back to Top