Platinum-based alloy absorber with improved etching properties for next-generation EUV mask

Yunsoo Kim; Dongmin Jeong; Seungho Lee; Jinho Ahn

doi:10.1117/12.2685114

21 November 2023 Platinum-based alloy absorber with improved etching properties for next-generation EUV mask

Yunsoo Kim, Dongmin Jeong, Seungho Lee, Jinho Ahn

Author Affiliations +

Proceedings Volume 12750, International Conference on Extreme Ultraviolet Lithography 2023; 127500R (2023) https://doi.org/10.1117/12.2685114
Event: SPIE Photomask Technology + EUV Lithography, 2023, Monterey, California, United States

Conference Poster

Abstract

Extreme ultraviolet (EUV) lithography is a critical technique for fabricating advanced semiconductor devices, and the development of a high numerical aperture (NA) system for future 3 nm nodes is currently in progress. The current Tabased EUV masks exhibit limited imaging performance attributed to mask 3D effects, thereby necessitating the development of alternative EUV masks. In this study, we propose platinum (Pt)-based alloys as the potential absorber materials that offer benefits in terms of both mask manufacturing and imaging performance. Despite the superior imaging performance of Pt due to its optical properties, its adoption as a mask absorber is difficult because of its low etchability. Therefore, tungsten (W) which has high reactivity with fluorine-based etch gas was introduced as an alloy material to lower intermolecular binding energy, and argon (Ar) ion implantation was employed to amorphize the thin film. We evaluated the etching properties of ion-implanted Pt-W alloy thin films using CF₄/O₂/Ar gas. As a result, we verified that the etch rate of the implanted alloy was about 1.86 times higher than that of Pt, resulting in a higher sidewall angle in patterns. Furthermore, based on PROLITH 2022a simulation tool, we confirmed that Pt-W alloys showed about 2.4 NILS at 34 nm thickness which is higher than the current Ta-based mask, and the best focus shift has been mitigated by 33 %. In conclusion, Pt-based materials have the potential to apply as the next-generation absorber for EUV masks that can achieve fine patterning and enhance imaging performance.

(2023) Published by SPIE. Downloading of the abstract is permitted for personal use only.

Citation Download Citation

Yunsoo Kim, Dongmin Jeong, Seungho Lee, and Jinho Ahn "Platinum-based alloy absorber with improved etching properties for next-generation EUV mask", Proc. SPIE 12750, International Conference on Extreme Ultraviolet Lithography 2023, 127500R (21 November 2023); https://doi.org/10.1117/12.2685114

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE