Synthetic CVD diamond has exceptional properties, including broad spectral transmission, physical and chemical robustness, and the highest thermal conductivity of any known material, making diamond an attractive material for medium to high power optical and laser applications, minimizing the detrimental effects of thermal lensing and radiation damage. Example applications include ATR prisms, Raman laser crystals, extra- and intra-cavity laser cooling. In each case the demands on the fundamental material properties and fabrication routes are slightly different. In recent years, there has been good progress in the development of low-loss, single crystal diamond, suitable for higher power densities, higher pulse rates and more demanding intra- and extra-cavity thermal management. The adoption of single crystal diamond in this area has however, been hindered by the availability of large area, low birefringence plates.
To address this, we report a combination of CVD growth and processing methods that have enabled the manufacture of large, low defect substrates. A final homoepitaxial, low absorption synthesis stage has produced plates with large area (up to 16 mm edge length), low absorption (α<0.005 cm-1 at 1064 nm), and low birefringence (∆n <10-5), suitable for double-sided intra-cavity cooling. We demonstrate the practical advances in synthesis, including increasing the size while reducing in-use losses compared to previous generations of single crystal material, and practical developments in processing and implementation of the single crystal diamond parts, optimizing them for use in a state-of-the-art femto-second pulsed Ti:Sa thin disk gain module, all made in collaboration with the wider European FP7 funded Ti:Sa TD consortium.
Microwave assisted chemical vapour deposited bulk diamond products have been used in a range of high power laser systems, due to low absorption across a range of wavelengths and exceptional thermal properties. However the application of polycrystalline products has frequently been limited to applications at longer wavelengths or thermal uses outside of the optical path due to the birefringence and scatter that are intrinsic properties of the polycrystalline materials. However, there are some solid state structures, including thin disc gain modules and amplifiers, that will gain significantly in terms of potential output powers if diamond could be used as a heat spreader in the optical path as well as a heat spreader on the rear surface of the disk. Therefore single crystal grades of diamond have been developed that overcome the limitations of the polycrystalline material, with low absorption, low scatter and low birefringence grades for demanding optical applications. We will present new data, characterising the performance of these materials across infra-red and visible wavelengths with absorption coefficient measured by laser calorimetry at a range of wavelengths from 1064 nm to 452 nm.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.