SignificanceMinimally invasive surgery (MIS) has shown vast improvement over open surgery by reducing post-operative stays, intraoperative blood loss, and infection rates. However, in spite of these improvements, there are still prevalent issues surrounding MIS that may be addressed through hyperspectral imaging (HSI). We present a laparoscopic HSI system to further advance the field of MIS.AimWe present an imaging system that integrates high-speed HSI technology with a clinical laparoscopic setup and validate the system’s accuracy and functionality. Different configurations that cover the visible (VIS) to near-infrared (NIR) range of electromagnetism are assessed by gauging the spectral fidelity and spatial resolution of each hyperspectral camera.ApproachStandard Spectralon reflectance tiles were used to provide ground truth spectral footprints to compare with those acquired by our system using the root mean squared error (RMSE). Demosaicing techniques were investigated and used to measure and improve spatial resolution, which was assessed with a USAF resolution test target. A perception-based image quality evaluator was used to assess the demosaicing techniques we developed. Two configurations of the system were developed for evaluation. The functionality of the system was investigated in a phantom study and by imaging ex vivo tissues.ResultsMultiple configurations of our system were tested, each covering different spectral ranges, including VIS (460 to 600 nm), red/NIR (RNIR) (610 to 850 nm), and NIR (665 to 950 nm). Each configuration is capable of achieving real-time imaging speeds of up to 20 frames per second. RMSE values of 3.51±2.03%, 3.43±0.84%, and 3.47% were achieved for the VIS, RNIR, and NIR systems, respectively. We obtained sub-millimeter resolution using our demosaicing techniques.ConclusionsWe developed and validated a high-speed hyperspectral laparoscopic imaging system. The HSI system can be used as an intraoperative imaging tool for tissue classification during laparoscopic surgery.
Prostate cancer ranks among the most prevalent types of cancer in males, prompting a demand for early detection and non-invasive diagnostic techniques. This paper explores the potential of ultrasound radiofrequency (RF) data to study different anatomic zones of the prostate. The study leverages RF data's capacity to capture nuanced acoustic information from clinical transducers. The research focuses on the peripheral zone due to its high susceptibility to cancer. The feasibility of utilizing RF data for classification is evaluated using ex-vivo whole prostate specimens from human patients. Ultrasound data, acquired using a phased array transducer, is processed, and correlated with B-mode images. A range filter is applied to highlight the peripheral zone's distinct features, observed in both RF data and 3D plots. Radiomic features were extracted from RF data to enhance tissue characterization and segmentation. The study demonstrated RF data's ability to differentiate tissue structures and emphasizes its potential for prostate tissue classification, addressing the current limitations of ultrasound imaging for prostate management. These findings advocate for the integration of RF data into ultrasound diagnostics, potentially transforming prostate cancer diagnosis and management in the future.
Augmented reality (AR) has seen increased interest and attention for its application in surgical procedures. AR-guided surgical systems can overlay segmented anatomy from pre-operative imaging onto the user’s environment to delineate hard-to-see structures and subsurface lesions intraoperatively. While previous works have utilized pre-operative imaging such as computed tomography or magnetic resonance images, registration methods still lack the ability to accurately register deformable anatomical structures without fiducial markers across modalities and dimensionalities. This is especially true of minimally invasive abdominal surgical techniques, which often employ a monocular laparoscope, due to inherent limitations. Surgical scene reconstruction is a critical component towards accurate registrations needed for AR-guided surgery and other downstream AR applications such as remote assistance or surgical simulation. In this work, we utilize a state-of-the-art (SOTA) deep-learning-based visual simultaneous localization and mapping (vSLAM) algorithm to generate a dense 3D reconstruction with camera pose estimations and depth maps from video obtained with a monocular laparoscope. The proposed method can robustly reconstruct surgical scenes using real-time data and provide camera pose estimations without stereo or additional sensors, which increases its usability and is less intrusive. We also demonstrate a framework to evaluate current vSLAM algorithms on non-Lambertian, low-texture surfaces and explore using its outputs on downstream tasks. We expect these evaluation methods can be utilized for the continual refinement of newer algorithms for AR-guided surgery.
Biopsies play a crucial role in diagnosis of various diseases including cancers. In this study, we developed an augmented reality (AR) system to improve biopsy procedures and increase targeting accuracy. Our AR-guided biopsy system uses a high-speed motion tracking technology and an AR headset to display a holographic representation of the organ, lesions, and other structures of interest superimposed on real physical objects. The first application of our AR system is prostate biopsy. By incorporating preoperative scans, such as computed tomography (CT) or magnetic resonance imaging (MRI), into real-time ultrasound-guided procedures, this innovative AR-guided system enables clinicians to see the lesion as well as the organs in real time. With the enhanced visualization of the prostate, lesion, and surrounding organs, surgeons can perform prostate biopsies with an increased accuracy. Our AR-guided biopsy system yielded an average targeting accuracy of 2.94 ± 1.04 mm and can be applied for real-time guidance of prostate biopsy as well as other biopsy procedures.
While minimally invasive laparoscopic surgery can help reduce blood loss, reduce hospital time, and shorten recovery time compared to open surgery, it has the disadvantages of limited field of view and difficulty in locating subsurface targets. Our proposed solution applies an augmented reality (AR) system to overlay pre-operative images, such as those from magnetic resonance imaging (MRI), onto the target organ in the user’s real-world environment. Our system can provide critical information regarding the location of subsurface lesions to guide surgical procedures in real time. An infrared motion tracking camera system was employed to obtain real-time position data of the patient and surgical instruments. To perform hologram registration, fiducial markers were used to track and map virtual coordinates to the real world. In this study, phantom models of each organ were constructed to test the reliability and accuracy of the AR-guided laparoscopic system. Root mean square error (RMSE) was used to evaluate the targeting accuracy of the laparoscopic interventional procedure. Our results demonstrated a registration error of 2.42 ± 0.79 mm and a procedural targeting error of 4.17 ± 1.63 mm using our AR-guided laparoscopic system that will be further refined for potential clinical procedures.
Minimally invasive surgery (MIS) has expanded broadly in the field of abdominal and pelvic surgery. However, there are still prevalent issues surrounding intracorporeal surgery, such as iatrogenic injury, anastomotic leakage, or the presence of positive tumor margins after resection. Current approaches to address these issues and advance laparoscopic imaging techniques often involve fluorescence imaging agents, such as indocyanine green (ICG), to improve visualization, but these have drawbacks. Hyperspectral imaging (HSI) is an emerging optical imaging modality that takes advantage of spectral characteristics of different tissues. Various applications include tissue classification and digital pathology. In this study, we developed a dual-camera system for high-speed hyperspectral imaging. This includes the development of a custom application interface and corresponding hardware setup. Characterization of the system was performed, including spectral accuracy and spatial resolution, showing little sacrifice in speed for the approximate doubling of the covered spectral range, with our system acquiring 29 spectral images from 460 to 850nm. Reference color tiles with various reflectance profiles were imaged and a RMSE of 3.56 ± 1.36% was achieved. Sub-millimeter resolution was shown at 7cm working distance for both hyperspectral cameras. Finally, we image ex vivo tissues, including porcine stomach, liver, intestine, and kidney with our system and use a high-resolution, radiometrically calibrated spectrometer for comparison and evaluation of spectral fidelity. The dual-camera hyperspectral laparoscopic imaging system can have immediate applications in various surgeries.
Minimally Invasive Surgery (MIS) has expanded broadly in the field of abdominal and pelvic surgery. Laparoscopic and robotic surgery has improved surgeon ergonomics, instrument precision, operative time, and postoperative recovery across various abdominal procedures. The goal of this study is to establish the feasibility of implementing high-speed hyperspectral imaging into a standard laparoscopic setup and exploring its benefit to common intracorporeal procedures. A hyperspectral laparoscopic imaging system was constructed using a customized hyperspectral camera alongside a standard rigid laparoscope and was validated for both spectral and spatial accuracy. Demos icing methods were investigated for improved full-resolution visualization. Hyperspectral cameras with different spectral ranges were considered and compared with one another alongside two different light sources to determine the most effective configuration. Finally, different porcine tissues were imaged ex-vivo to test the capabilities of the system and spectral footprints of the various tissues were extracted. The tissue was also imaged in a phantom to simulate the system’s use in MIS. The results demonstrated a hyperspectral laparoscopic imaging system that could provide quantitative, diagnostic information while not disrupting normal workflow nor adding excessive weight to the laparoscopic setup. The high-speed hyperspectral laparoscopic imaging system can have immediate applications in image-guided surgery.
Phantoms are invaluable tools broadly used for research and training purposes designed to mimic tissues and structures in the body. In this paper, polyvinyl chloride (PVC)-plasticizer and silicone rubbers were explored as economical materials to reliably create long-lasting, realistic kidney phantoms with contrast under both ultrasound (US) and X-ray imaging. The radiodensity properties of varying formulations of soft PVC-based gels were characterized to allow adjustable image intensity and contrast. Using this data, a phantom creation workflow was established which can be easily adapted to match radiodensity values of other organs and soft tissues in the body. Internal kidney structures such as the medulla and ureter were created using a two-part molding process to allow greater phantom customization. The kidney phantoms were imaged under US and X-ray scanners to compare the contrast enhancement of a PVC-based medulla versus a silicone-based medulla. Silicone was found to have higher attenuation than plastic under X-ray imaging, but poor quality under US imaging. PVC was found to exhibit good contrast under X-ray imaging and excellent performance for US imaging. Finally, the durability and shelf life of our PVC-based phantoms were observed to be vastly superior to that of common agar-based phantoms. The work presented here allows extended periods of usage and storage for each kidney phantom while simultaneously preserving anatomical detail, contrast under dual-modality imaging, and low cost of materials.
We developed a reliable and repeatable process to create hyper-realistic, kidney phantoms with tunable image visibility under ultrasound (US) and CT imaging modalities. A methodology was defined to create phantoms that could be produced for renal biopsy evaluation. The final complex kidney phantom was devised containing critical structures of a kidney: kidney cortex, medulla, and ureter. Simultaneously, some lesions were integrated into the phantom to mimic the presence of tumors during biopsy. The phantoms were created and scanned by ultrasound and CT scanners to verify the visibility of the complex internal structures and to observe the interactions between material properties. The result was a successful advancement in knowledge of materials with ideal acoustic and impedance properties to replicate human organs for the field of image-guided interventions.
Kidney biopsies are currently performed using preoperative imaging to identify the lesion of interest and intraoperative imaging used to guide the biopsy needle to the tissue of interest. Often, these are not the same modalities forcing the physician to perform a mental cross-modality fusion of the preoperative and intraoperative scans. This limits the accuracy and reproducibility of the biopsy procedure. In this study, we developed an augmented reality system to display holographic representations of lesions superimposed on a phantom. This system allows the integration of preoperative CT scans with intraoperative ultrasound scans to better determine the lesion’s real-time location. An automated deformable registration algorithm was used to increase the accuracy of the holographic lesion locations, and a magnetic tracking system was developed to provide guidance for the biopsy procedure. Our method achieved a targeting accuracy of 2.9 ± 1.5 mm in a renal phantom study.
This study has brought together image processing, clustering and spatial pattern analysis to quantitatively analyze hematoxylin and eosin-stained (HE) tissue sections. A mixture of tumor and normal cells (intratumoral heterogeneity) as well as complex tissue architectures of most samples complicate the interpretation of their cytological profiles. To address these challenges, we develop a simple but effective methodology for quantitative analysis for HE section. We adopt comparative analyses of spatial point patterns to characterize spatial distribution of different nuclei types and complement cellular characteristics analysis. We demonstrate that tumor and normal cell regions exhibit significant differences of lymphocytes spatial distribution or lymphocyte infiltration pattern.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.