The next generation of extreme adaptive optics (AO) must be calibrated exceptionally well to achieve the desired contrast for ground-based direct imaging exoplanet targets. Current wavefront sensing and control system responses deviate from lab calibration throughout the night due to non linearities in the wavefront sensor (WFS) and signal loss. One cause of these changes is the optical gain (OG) effect, which shows that the difference between actual and reconstructed wavefronts is sensitive to residual wavefront errors from partially corrected turbulence. This work details on-sky measurement of optical gain on MagAO-X, an extreme AO system on the Magellan Clay 6.5m. We ultimately plan on using a method of high-temporal frequency probes on our deformable mirror to track optical gain on the Pyramid WFS. The high-temporal frequency probes, used to create PSF copies at 10-22 λ/D, are already routinely used by our system for coronagraph centering and post-observation calibration. This method is supported by the OG measurements from the modal response, measured simultaneously by sequenced pokes of each mode. When tracked with DIMM measurements, optical gain calibrations show a clear dependence on Strehl Ratio, and this relationship is discussed. This more accurate method of calibration is a crucial next step in enabling higher fidelity correction and post processing techniques for direct imaging ground based systems.
High-contrast imaging data analysis depends on removing residual starlight from the host star to reveal planets and disks. Most observers do this with principal components analysis (i.e. KLIP) using modes computed from the science images themselves. These modes may not be orthogonal to planet and disk signals, leading to over-subtraction. The wavefront sensor data recorded during the observation provide an independent signal with which to predict the instrument point-spread function (PSF). MagAO-X is an extreme adaptive optics (ExAO) system for the 6.5-meter Magellan Clay telescope and a technology pathfinder for ExAO with GMagAO-X on the upcoming Giant Magellan Telescope. MagAO-X is designed to save all sensor information, including kHz-speed wavefront measurements. Our software and compressed data formats were designed to record the millions of training samples required for machine learning with high throughput. The large volume of image and sensor data lets us learn a PSF model incorporating all the information available. This allows us to probe smaller star-planet separations at greater sensitivities, which will be needed for rocky planet imaging.
The high contrast and spatial resolution requirements for directly imaging exoplanets requires effective coordination of wavefront control, coronagraphy, observation techniques, and post-processing algorithms. However, even with this suite of tools, identifying and retrieving exoplanet signals embedded in resolved scattered light regions can be extremely challenging due to the increased noise from scattered light off the circumstellar disk and the potential misinterpretation of the true nature of the detected signal. This issue pertains not only to imaging terrestrial planets in habitable zones within zodiacal and exozodiacal emission but also to young planets embedded in circumstellar, transitional, and debris disks. This is particularly true for Hα detection of exoplanets in transitional disks. This work delves into recent Hα observations of three transitional disks systems with MagAO-X, an extreme adaptive optics system for the 6.5-meter Magellan Clay telescope. We employed angular differential imaging (ADI) and simultaneous spectral differential imaging (SSDI) in combination with KLIP, a PCA algorithm in post-processing, for optimal starlight suppression and quasi-static noise removal. We discuss the challenges in protoplanet identification with MagAO-X in environments rich with scattered and reflected light from disk structures and explore a potential solution for removing noise contributions from real astronomical objects with current observation and post-processing techniques.
MagAO-X is the coronagraphic extreme adaptive optics system for the 6.5m Magellan Clay Telescope. We report the results of commissioning the first phase of MagAO-X. Components now available for routine observations include: the >2kHz high-order control loop consisting of a 97 actuator woofer deformable mirror (DM), a 2040 actuator tweeter DM, and a modulated pyramid wavefront sensor (WFS); classical Lyot coronagraphs with integrated low-order (LO) WFS and control using a third 97-actuator non-common path correcting (NCPC) DM; broad band imaging in g, r, i, and z filters with two EMCCDs; simultaneous differential imaging in Hα; and integral field spectroscopy with the VIS-X module. Early science results include the discovery of an Hα jet, images of accreting protoplanets at Hα, images of young extrasolar giant planets in the optical, discovery of new white dwarf companions, resolved images of evolved stars, and high-contrast images of circumstellar disks in scattered light in g-band (500nm). We have commenced an upgrade program, called “Phase II”, to enable high-contrast observations at the smallest inner working angles possible. These upgrades include a new 952 actuator NCPC DM to enable coronagraphic wavefront control; phase induced amplitude apodization coronagraphs; new fast cameras for LOWFS and Lyot-LOWFS; and real-time computer upgrades. We will report the status of these upgrades and results of first on-sky testing in March-May 2024.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.