High sensitivity near-ultraviolet (NUV) avalanche photodiodes operating at wavelengths longer than 300 nm are useful for various applications, including surface exploration of Ocean Worlds and other planetary bodies via Raman spectroscopy. 4H-SiC has long been established as a proven UV detector technology; however, the responsivity of 4H–SiC avalanche photodiodes (APDs) diminishes dramatically at wavelengths longer than ≈ 280 nm due to its weak absorption at wavelengths approaching the indirect bandgap. The authors will present on the design and optimization of 4H-SiC separate absorption, charge and multiplication (SACM) APDs for broadband absorption from 266 to 340 nm.
Photodetectors in the ultraviolet spectral range are of great interest for applications such as fluorescence-free Raman spectroscopy and non-line-of-sight optical communications. These applications require single-photon sensitivity, resulting in the use of intensified CCDs or photomultiplier tubes (PMTs) that are bulky, fragile, operate at high voltages, and/or require active cooling. Silicon carbide avalanche photodiodes (SiC APD) show promise as a compact, rugged replacement, as they exhibit low noise, durability and high gain. In this paper we report on detailed studies of p+-p-i-n SiC APDs operating in both Geiger and linear mode. The single photon detection efficiency (SPDE) of these devices was measured as a function of excess bias using a pulsed 280 nm light emitting diode source focused through a 20 µm pinhole to a spot size <12 µm, with photons per pulse characterized at < 0.5 using a UV enhanced PMT. Devices with 100 µm diameter achieved SPDE > 20% with dark count rate (DCR) of < 700 Hz in both gated and continuous operation. Comparison with linear mode operation shows that avalanche multiplication gain in these devices exceeds 5x106 under these conditions. Examination of linear mode gain vs. applied bias dependence suggests that a sluggish dependence corresponds to a poorer SPDE, which is likely associated with parasitic resistance in these devices. This resistance is consistent with the observed inverse dependence of calculated linear mode gain with increasing optical flux. A peak SPDE of 37% was measured at an excess bias of 3.9 V with a DCR of 7.3 kHz.
III-V materials, which exhibit high absorption coefficients and charge carrier mobility, are ideal templates for solar energy conversion applications. This work describes the photoelectrochemistry research in several IIIV/electrolyte junctions as an enabler for device design for solar chemical reactions. By designing lattice-matched epitaxial growth of InGaP and GaP on GaAs and Si, respectively, extended depletion region electrodes achieve photovoltages which provide an additional boost to the underlying substrate photovoltage. The InGaP/GaAs and GaP/Si electrodes drive hydrogen evolution currents under aqueous conditions. By using nanowires of InN and InP under carefully controlled growth conditions, current and capacitance measurements are obtained to reveal the nature of the nanowire-electrolyte interface and how light is translated into photocurrent for InP and a photovoltage in InN. The materials system is expanded into the III-V nitride semiconductors, in which it is shown that varying the morphology of GaN on silicon yields insights to how the interface and light conversion is modulated as a basis for future designs. Current extensions of this work address growth and tuning of the III-V nitride electrodes with doping and polarization engineering for efficient coupling to solar-driven chemical reactions, and rapid-throughput methods for III-V nanomaterials synthesis in this materials space.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.