We report a passively Q-switched all-fiber laser using a large mode area (LMA) Yb3+-doped fiber cladding-pumped at 915 nm and an unpumped single-mode Yb3+-doped fiber as the saturable absorber (SA). The saturable absorber and gain fibers were first coupled with a free-space telescope to better study the composite system, and then fusion spliced with fiber tapers to match the mode field diameters. ASE generated in the LMA gain fiber preferentially bleaches the SA fiber before depleting the gain, thereby causing the SA fiber to act as a passive saturable absorber. Using this scheme we first demonstrate a Q-switched oscillator with 40 μJ 79 ns pulses at 1026 nm using a free-space taper, and show that pulses can be generated from 1020 nm to 1040 nm. We scale the pulse energy to 0.40 mJ using an Yb3+-doped cladding pumped fiber amplifier. Experimental studies in which the saturable absorber length, pump times, and wavelengths are independently varied reveal the impact of these parameters on laser performance. Finally, we demonstrate 60 μJ 81 ns pulses at 1030 nm in an all fiber architecture using tapered mode field adaptors to match the mode filed diameters of the gain and SA fibers.
Sandia National Laboratories' program in high-power fiber lasers has emphasized development of enabling technologies
for power scaling and gaining a quantitative understanding of fundamental limits, particularly for high-peak-power,
pulsed fiber sources. This paper provides an overview of the program, which includes: (1) power scaling of diffraction-limited
fiber amplifiers by bend-loss-induced mode filtering to produce >1 MW peak power and >1 mJ pulse energy
with a practical system architecture; (2) demonstration of a widely tunable repetition rate (7.1-27 kHz) while
maintaining constant pulse duration and pulse energy, linear output polarization, diffraction-limited beam quality, and
<1% pulse-energy fluctuations; (3) development of microlaser seed sources optimized for efficient energy extraction; (4)
high-fidelity, three-dimensional, time-dependent modeling of fiber amplifiers, including nonlinear processes; (5)
quantitative assessment of the limiting effects of four-wave mixing and self-focusing on fiber-amplifier performance; (6)
nonlinear frequency conversion to efficiently generate mid-infrared through deep-ultraviolet radiation; (7) direct diode-bar
pumping of a fiber laser using embedded-mirror side pumping, which provides 2.0x higher efficiency and much
more compact packaging than traditional approaches employing formatted, fiber-coupled diode bars; and (8)
fundamental studies of materials properties, including optical damage, photodarkening, and gamma-radiation-induced
darkening.
Clustering is among the oldest techniques used in data mining applications. Typical implementations of the hierarchical agglomerative clustering methods (HACM) require an amount of O(N2)-space, when there are N data objects, making such algorithms impractical for problems involving large datasets. The well-known clustering algorithm RNN- CLINK requires only O(N)-space, but O(N3)-time in the worst case, although the average time appears to be O(N2-log N). We provide a probabilistic interpretation of the average time complexity of the algorithm. We also report experimental results, using the randomly generated bit vectors, and using the NETNEWS articles as the input, to support our theoretical analysis.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.