With the technology development, it is highly desirable to enhance the power and brightness of a 1550 pulsed laser in order to increase the detectable distance and improve the spatial resolution. In this paper, a 1550 tunnel junction high peak power semiconductor laser based on AlGaInAs/InP material system for lidar detection is designed, which peak output power is approximately three times that of a individual emitter.The adjacent individual emitter of the tunnel junction laser is connected by the tunnel junction, and each tunnel junction is formed by a highly doped p-type InGaAs layer and a highly doped n-type InGaAs layer. Crosslight Software's PICS3D module is used to simulate the epitaxial structure of an individual emitter, simulating its photoelectric characteristics and through the simulation and optimization of a individual emitter with a strip width of 100 μm and different cavity length, it is found that when the cavity length is 1000 μm, the slope efficiency of the single-junction laser can reach 0.37 W/A; when the cavity length is 800 μm, the slope efficiency of the individual emitter can reach 0.45 W/A. Therefore, shortening the cavity length of the laser can improve the slope efficiency of the laser, and it is expected to increase the slope efficiency of the three-tunnel junction laser to more than 1 W/A. It is expected to achieve a 1550 high-power tunnel junction semiconductor laser.
Quantum-well intermixing (QWI) technology is considered as an effective methodology to tune the post-growth bandgap energy of semiconductor compound materials, and is widely used in diode lasers and photonic integrated devices, and other fields. In order to improve the resistance to the catastrophic optical damage for 8XX semiconductor lasers based on AlGaInAs/AlGaAs quantum wells, we adopt a method of impurity-free vacancy disordering. Plasma enhanced chemical vapor deposition is used to grow SiO2 layer on the surface of the epi-wafer in the experiment. The influence of dielectric layer thickness, heat treatment temperature and heat treatment time on the QWI effect is explored through the control variable method, and the inhibition effect of oxygen ion bombardment on QWI is also investigated. The Photo-luminescence wavelength blue shift of the sample is 30-40 nm when the sample is covered by 450 nm SiO2 and subjected to rapid heat treatment under 900°C for 270 s, which can be used as the non-absorbing region of the laser. In addition, in the experiment of suppressing QWI, the laser epitaxy is first bombarded by oxygen ions from 10 s to150s, and then is deposited with 450 nm SiO2 dielectric layer, and finally underwent rapid heat treatment under 875°C for 270s. It’s found that the sample blue shift is 5nm after 150 s bombardment, and the blue shift inhibition effect is good. Therefore, the combination of SiO2 dielectric layer and plasma bombardment can be applied to the preparation of laser transparent window
KEYWORDS: Waveguides, Semiconductor lasers, Beam divergence, High power lasers, Quantum wells, Near field optics, Optical simulations, Refractive index, Laser therapeutics
High power 1470 nm semiconductor lasers are widely used in microtissue repair, white polymer plastic welding, and turbulence detection in front of defense aircraft. Most of the current 1470 nm lasers mostly suffer from low slop efficiency and large divergence angle. In order to reduce the divergence angle and increase the output power of the 1470 nm lasers, a mode expansion layer (MEL) is introduced to narrow the far-field divergence angle, and an electron blocking layer (EBL) is introduced to minimize the carrier leakage. Based on the strain quantum well theory, the active region material was optimized with a thickness of 5 nm quantum well layer and 11 nm barrier layer. Simulation results show that the slope efficiency is increased from 0.086W/A to 0.466 W/A, and the full width at half maximum (FWHM) of the vertical farfield divergence angle is reduced from 38.6° to 27.0°, which is of great significance for the study of 1470 nm lasers.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.