Passive microwave temperature and water vapor sounding of the Earth’s atmosphere provides one of the most valuable quantitative contributions to weather prediction and is a key factor in initializing and validating climate models. Recent advances in the capabilities and robustness of small satellite components and systems provide an opportunity for NOAA, EUMETSAT and other operational agencies to explore the value of launching passive microwave sounder/imagers and complementary instruments on small spacecraft, including CubeSats, for relatively small investments. This provides the potential for deployment of microwave sounder constellations in low-Earth orbit (LEO) to substantially shorten revisit times. In this context, the first CubeSat-based multi-frequency microwave sounder to provide global data over a substantial period is the Temporal Experiment for Storms and Tropical Systems Demonstration (TEMPEST-D) mission. This mission was designed to demonstrate on-orbit capabilities of a five-frequency millimeter-wave radiometer to enable a future constellations of 6U CubeSats with low-mass, low-power millimeter-wave sensors to observe changes in convection and water vapor vertical profiles with revisit times on the order of minutes instead of hours. TEMPEST millimeter-wave radiometers provide observations at five frequencies from 87-181 GHz, with spatial resolution ranging from 12.5-25 km. To demonstrate technology necessary for deployment and operation of a CubeSat constellation of microwave sounders, the TEMPEST-D satellite was launched on May 21, 2018 from NASA Wallops to the ISS and successfully deployed into a 404-km orbit at 51.6° inclination on July 13, 2018. Now more than two years and nine months into its mission, the TEMPEST-D radiometer continues to provide science-quality data. The TEMPEST-D mission met all of its Level-1 requirements within the first 90 days of operations and achieved TRL 9 for both instrument and spacecraft systems. Validation of the TEMPEST-D brightness temperatures was performed over 50 days during a 13-month period through comparisons with GPM/GMI and MHS on NOAA-19, MetOp-A, MetOp-B and MetOp-C satellites. Results demonstrated calibration accuracy of TEMPEST-D within 1 K and stability within 0.6 K, as well as no evidence of any significant changes over time or with instrument temperature. TEMPEST-D brightness temperatures have been used to demonstrate data assimilation into NOAA numerical weather prediction models as well as atmospheric science parameter retrievals. In summary, on-orbit results show that TEMPEST-D is a very well-calibrated, highly stable radiometer, indistinguishable in performance from larger, more expensive operational sensors. Over its mission lifetime of nearly three years, TEMPEST-D has demonstrated the feasibility of deployment of a constellation of microwave sounders on CubeSats for relatively low cost and short timeline for implementation. A recently-completed CSU study, funded by NOAA, showed the potential for a CubeSat constellation of TEMPEST-based microwave sounders to perform temperature and moisture profiling with shorter refresh times. The InP HEMT low-noise amplifier technology developed for TEMPEST-D receivers for moisture profiling using 87-181 GHz frequencies can be enhanced by adding receivers with temperature profiling frequencies from 114-118 GHz range. The NOAA study demonstrated that a TEMPEST-based constellation of less than 12 CubeSats has the potential to greatly improve revisit times of current polar-orbiting operational microwave sensors.
This Conference Presentation, “Millimeter-wave sounder/imager on a CubeSat providing global atmospheric science observations for more than two years on orbit: Temporal Experiment for Storms and Tropical Systems-Demonstration (TEMPEST-D) Mission,” was recorded at SPIE Optics + Photonics 2021 held in San Diego, California, United States.
The Temporal Experiment for Storms and Tropical Systems Demonstration (TEMPEST-D) mission is the first CubeSat-based multi-frequency microwave sounder to provide global data over a sustained period. The mission was designed to demonstrate on-orbit capabilities of a five-frequency millimeter-wave radiometer for a complete TEMPEST mission using a closely-spaced train of eight 6U CubeSats with identical low-mass, low-power millimeter-wave sensors to sample rapid changes in convection and surrounding water vapor every 3-4 minutes for up to 30 minutes. The TEMPEST-D satellite was launched on May 21, 2018 from NASA Wallops to the ISS and was successfully deployed on July 13, 2018, into a 400-km orbit at 51.6° inclination. The TEMPEST-D sensor has been operating nearly continuously since its first light data on September 5, 2018. On-orbit results indicate that TEMPEST-D is a very well-calibrated, highly stable radiometer, indistinguishable in performance from larger operational sensors.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.