The P300: An Approach to Automated Inspection of Patterned Wafers

Virginia Brecher; Raymond Bonner; Byron E. Dom

doi:10.1117/12.953093

19 July 1989 The P300: An Approach to Automated Inspection of Patterned Wafers

Virginia Brecher, Raymond Bonner, Byron E. Dom

Proceedings Volume 1087, Integrated Circuit Metrology, Inspection, and Process Control III; (1989) https://doi.org/10.1117/12.953093
Event: 1989 Santa Clara Symposium on Microlithography, 1989, San Jose, CA, United States

Abstract

As IC groundrules shrink, manual optical inspection of multilevel patterned wafers becomes ineffective if not impossible, and efforts to develop automatic wafer inspection systems have expanded. This paper describes one successful approach, the P300 Automatic Wafer Inspection System[1], which uses a greylevel reference comparison of adjacent cells to locate defects on periodic pattern. The defects may be either pattern anomalies or particulates. Experiments demonstrate that the P300, scanning at a rate significantly faster than a human inspector, finds over ninety percent of half micron defects and over ninety-five percent of defects one micron or larger. By basing the inspection algorithm on a cell-to-cell comparison within a frame, as opposed to the conventional chip to chip or chip to CAD database reference, the system avoids detecting false alarms caused by acceptable variations in reflectivity, film thickness, critical dimensions and overlay registration over the surface of the wafer. A simple cell-to-cell comparison, however, would he prone to detecting false alarms due to electronic and digitization noise, aliasing, vibration, and illumination non-uniformity, as well as small scale acceptable process variation. By adding a statistical test to filter out noise and an edge detector to reduce sensitivity on edges, the false positive rate has been kept below a fraction of a percent of the frames inspected. The paper will discribe the system architecture and inspection algorithms and discuss specific inspection applications.

Citation Download Citation

Virginia Brecher, Raymond Bonner, and Byron E. Dom "The P300: An Approach to Automated Inspection of Patterned Wafers", Proc. SPIE 1087, Integrated Circuit Metrology, Inspection, and Process Control III, (19 July 1989); https://doi.org/10.1117/12.953093

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available