Our study demonstrates the potential of Airborne Visible/Infrared Imaging Spectrometer Next Generation (AVIRIS-NG) hyperspectral data and radiative transfer modeling to retrieve the atmospheric carbon dioxide (CO2) concentration from point source emission of one of India’s major coal-fed super thermal power plants at Kota, Rajasthan, India. AVIRIS-NG data with synchronous in situ measurements were collected as a part of the first ISRO-NASA joint airborne hyperspectral science campaign in India. The method utilized in our study includes theoretical simulations of at-sensor radiance in AVIRIS-NG spectral bands through the atmospheric radiative transfer model MODTRAN. Simulations were performed for the specific scene-sensor-atmospheric conditions pertaining to AVIRIS-NG overpass over Kota site. To eliminate the interfering effect of atmospheric water vapor with CO2 concentrations, simulations pertaining to variable water vapor values varying from 0.25 to 4.5 g / cm2 were also carried out, which in turn were utilized to normalize the water vapor effects. Based upon the simulation results pertaining to the specific absorption bands of CO2 in the shortwave infrared spectral range of AVIRIS-NG radiance data, a theoretical model was established between continuum interpolated band ratio (CIBR) and CO2 concentration. The CIBR − CO2 model coefficients for each of the water vapor subranges were then applied to AVIRIS-NG L1 radiance data to obtain the CO2 concentration map of the study area. A distinct CO2 plume could be detected from the coal-fed Kota Super Thermal Power Station with the CO2 concentration (XCO2) of the order of more than 500 ppmv near the power plant stacks. A range of XCO2 from 400 to 550 ppmv was observed within the scene. Our study has provided promising results in mapping the atmospheric CO2 content from the point source using the high-resolution airborne hyperspectral AVIRIS-NG data.
Heat Waves can have notable impacts on human mortality, ecosystem, economics and energy supply. The effect of heat wave is much more intense during summer than the other seasons. During the period of April to June, spells of very hot weather occur over certain regions of India and global warming scenario may result in further increases of such temperature anomalies and corresponding heat waves conditions. In this paper, satellite observations have been used to detect the heat wave conditions prevailing over India for the period of May-June 2015. The Kalpana-1 VHRR derived land surface temperature (LST) products have been used in the analysis to detect the heat wave affected regions over India. Results from the analysis shows the detection of heat wave affected pixels over Indian land mass. It can be seen that during the study period the parts of the west India, Indo-gangetic plane, Telangana and part of Vidarbh was under severe heat wave conditions which is also confirmed with Automatic Weather Station (AWS) air temperature observations.
Satellite based multispectral imagery contains various quantitative information related to surface and atmosphere. To extract the accurate information about surface, we need to correct atmospheric influence which is introduced by the atmosphere. Atmospheric correction of multispectral satellite imagery is an important prerequisite to derive geophysical parameters from satellite data. In this study surface reflectance is retrieved using the Scheme for Atmospheric Correction of Resourcesat-2 (SACRS2). The SACRS2 is physics based atmospheric correction scheme developed at Space Applications Centre (SAC), ISRO based on radiative transfer model 6SV (The Second Simulation of the Satellite Signal in the Solar Spectrum vector version). SACRS2 method is easily applicable for atmospheric correction of multispectral data. A detail analysis has been carried out to retrieve surface reflectance from Resourcesat-2 AWiFS, LISS-3 and LISS-4 data using SACRS2 method. The retrieved surface reflectance from SACRS2 for AWiFS, LISS-3 and LISS-4 have been compared with in-situ measurements. The comparison showed a good match of reflectance derived by SACRS2 scheme with the in-situ measurements.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.