Finn Christensen, Flemming Besenbacher, Jorgen Garnaes, Erik Laegsgaard, I. Stensgaard
Optical Engineering, Vol. 29, Issue 06, (June 1990) https://doi.org/10.1117/12.55645
TOPICS: X-rays, Mirrors, Scanning tunneling microscopy, Gold, X-ray microscopy, Surface finishing, Aluminum, Polishing, Platinum, Iridium
In this paper scanning tunneling microscopy (STM) measurements of x-ray mirrors are presented. The x-ray mirrors are 0.3 mm thick dip-lacquered aluminum foils coated with gold by evaporation, as well as state-of-the-art polished surfaces coated with gold, platinum, or iridium. The measurements reveal that the surfaces consist of islands with different topographic features. The microroughness is found to be in the range from 7 to 15 Å, and the characteristic length scale for this microroughness is estimated to be between 0.03 and 0.06 |xm. For the thin foil mirrors it is found that the microroughness depends on the thickness of the gold layer. The roughness is smallest (~ 7 to 9 Å) for gold layers between ~ 100 and ~ 250 Å, and it becomes significantly greater (~10 to 15 Å) for gold layers thicker than ~ 350 Å. With a few exceptions the STM measurements agree well with recent x-ray studies. The results can be used as a guide when selecting the best coating process in the production of x-ray mirrors.