Ring elements are of great significance in the field of precision machining, and their performance is crucial for the functionality of the whole system. However, the present frequent inspection of such components lacks effective means and is prone to causing damage to the component. In view of this, this article on the basis of comprehensive research, combined with the principle of optical interference detection, puts forward a measuring method for such components, the method by introducing a pyramid to realize high precision optical path, and according to the inner surface in the shape of different components, it can be divided into cylinder and circular arc surfaces, respectively, measuring scheme is designed. Then, according to the designed inspection scheme, the system is built separately for inspection. After the system is stable, the shape information of the tested part is obtained. After the system is stabilized, the shape information of the inspected part is obtained. The shape information of the inner surface of the ring element can be obtained after only one inspection.
Photomask manufacturing is an essential cornerstone of the semiconductor industry. Photomask substrate made of quartz is a hot topic in photomask manufacturing today, and the high requirements of photomask on quartz substrate make its optical homogeneity index extremely important as well. When measuring the optical homogeneity of a quartz substrate using a four-step absolute measurement method based on the Fizeau phase shift interference principle, the phenomenon of overlapping interference fringes was discovered. The cause was analyzed and the structure of measurement was simulated by Zemax. The simulation results identify the non-parallelity of the front and rear surfaces of the quartz substrate as the main effect.
An illumination system for coherent noise suppression is envisioned. The principle of coherent noise suppression is introduced, and this illumination system is designed this way. The illumination system is simulated, and the hybrid sequence model of Zemax analyzes the irradiance. To verify the noise suppression effect of this illumination system, it is used as the illumination part of the Fizeau interferometer. The interference process is simulated under the nonsequential model of Zemax to obtain an off-axis light source with a ring radius of 0.32 mm and a numerical aperture of 0.14. The Fizeau interferometer with a conventional light source is also simulated. A comparison experiment is set up to generate the same noise point in the two interferometers using different illumination modes to trace and produce the same four interference fringes with the same interferometric cavity length of 20 mm and the same tilt angle of the measured surface of 0.057°. Compared with the interferograms in the conventional illumination mode, the interference fringes formed by the illumination of this study are almost undamaged, and the near-complete interference information can be retained. The interferometer system with this light source was built and the test results were verified, and it was found that it could achieve the measurement accuracy of 1/20 wavelength and the measurement stability of 1.219 nm, and it also had a good contrast of interference fringe.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.